共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
3.
4.
5.
6.
7.
8.
微型汽车变速器齿轮降噪研究 总被引:1,自引:0,他引:1
根据铃木汽车变速器日本总成、国产总成噪声及齿轮零件检测结果,采用排列图比较分析,说明制造的零件满足设计要求时,装配后总成不一定满足噪声标准要求;利用CORREL相关系数对总成三、四档噪声值与相应齿轮副误差平均值进行相关分析,说明与总成噪声密切相关的齿轮精度项目是径向一齿综合误差;从齿轮制造工艺着手,提出几项降低噪声的措施,为铃木变速器齿轮降噪提供技术依据。 相似文献
9.
10.
11.
针对互通式立交出口可能出现的多种情况,结合工程实践,探讨其设计技术问题,提出设计思路及技术对策,并在技术分析中强调融入“安全至上”“动态设计”“灵活性设计”“宽容性设计”等设计新理念,使出口设计安全、合理. 相似文献
12.
13.
水泥混凝土安全护栏 总被引:1,自引:0,他引:1
赵文光 《筑路机械与施工机械化》1994,11(2):9-14
通过水泥混凝土安全护栏在道路交通中的实际应用,对其结构形式和主要参数以及具体的施工方法进行了较为详实的叙述,并对比介绍了水泥混凝土安全护栏的使用效果。 相似文献
14.
盾构隧道施工风险与规避对策 总被引:7,自引:2,他引:5
归纳地铁安全事故的类型及特点,介绍目前国内外盾构隧道情况,尤其是北京盾构隧道情况,分析盾构隧道施工的优点和不足之处,论述盾构隧道施工风险研究的必要性。重点分析盾构隧道施工的11种主要风险,即:地质预报准确性、盾构机适应性和可靠性、盾构进出洞施工、开挖面失稳、盾尾密封失效、软硬不均且差异性较大地层施工、较大的地层损失及不均匀沉降、开挖面有障碍物、隧道上浮、联络通道施工、明挖基础失稳等,并一一提出切实的规避对策。同时对国内外盾构隧道施工事故典型案例的情况及原因进行详细介绍和剖析。可为今后盾构隧道施工风险的分析、预测、防范及规避提供指导。 相似文献
15.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(12):1681-1694
A bicycle or inverted pendulum can be balanced, that is kept nearly upright, by accelerating the base. This balance is achieved by steering on a bicycle. Simultaneously one can also control the lateral position of the base: changing of the track line of a bike or the position of hand under a balanced stick. We show here with theory and experiment that if the balance problem is removed, by making the system neutrally stable for balance, one cannot simultaneously maintain balance and control the position of the base. We made a bricycle, essentially a bicycle with springy training wheels. The stiffness of the training wheel suspension can be varied from near infinite, making the bricycle into a tricycle, to zero, making it effectively a bicycle. The springy training wheels effectively reduce or even negate gravity, at least for balance purposes. One might expect a smooth transition from tricycle to bicycle as the stiffness is varied, in terms of handling, balance and feel. Not so. At an intermediate stiffness, when gravity is effectively zeroed, riders can balance easily but no longer turn. Small turns cause an intolerable leaning. Thus there is a qualitative difference between bicycles and tricycles, a difference that cannot be met halfway. 相似文献
16.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(10):1575-1596
Steering feel, or steering torque feedback, is widely regarded as an important aspect of the handling quality of a vehicle. Despite this, there is little theoretical understanding of its role. This paper describes an initial attempt to model the role of steering torque feedback arising from lateral tyre forces. The path-following control of a nonlinear vehicle model is implemented using a time-varying model predictive controller. A series of Kalman filters are used to represent the driver's ability to generate estimates of the system states from noisy sensory measurements, including the steering torque. It is found that under constant road friction conditions, the steering torque feedback reduces path-following errors provided the friction is sufficiently high to prevent frequent saturation of the tyres. When the driver model is extended to allow identification of, and adaptation to, a varying friction condition, it is found that the steering torque assists in the accurate identification of the friction condition. The simulation results give insight into the role of steering torque feedback arising from lateral tyre forces. The paper concludes with recommendations for further work. 相似文献
17.
目前国内为了片面地提高路面强度来解决抗车辙能力,在沥青混合料原材料选用和组成设计中存在着误区,出现了其它质量问题。通过误区的提出和解决对策的探讨,期望能对公路设计者、建设者和养护者们提供一些参考,减少公路病害,降低养护成本,提高公路使用质量。 相似文献
18.
19.
20.
在汽车各部位,发动机发生故障的几率最高。为了寻找这些故障是由哪些因素引起、这些因素在发动机生命期各阶段的分布和它们如何引起发动机故障,通过搜集大量不同型号发动机发生的故障并统计和分析这些故障的成因,从中分离出发动机故障与设计、制造缺陷及使用与维护不当的关系。这为主动改善汽车发动机生命期质量提供了一种新的方法。 相似文献