模糊PID半主动悬架仿真与分析

本文应用对振动问题具有代表性的二自由度系统来模拟多自由度振动系统。本文选择建立二自由度1/4汽车半主动悬架简化模型,来近似模拟真实环境,在此基础上,利用MATLAB/SIMULINK建立被动悬架及半主动悬架仿真模型,在20m/s车速和白噪声路面输入条件下进行仿真。仿真表明,采用模糊PID半主动悬架,降低了汽车车身加速度,悬架动挠度,有一定程度减小,悬架动变形波动相对稳定。     

汽车非线性半主动悬架的模糊神经网络控制

考虑磁流变减振器阻尼力和悬架弹性元件非线性特性，建立车辆6自由度的半主动悬架非线性动力学模型。提出了一种基于模糊神经网络系统结构的模型参考自适应控制方法来研究汽车半主动悬架的非线性控制问题，并考虑半车模型前后悬架的输入时滞，对其进行了仿真研究。研究结果表明：运用模糊神经网络非线性控制方法能够使人体和车身垂直加速度、俯仰角加速度都得到很大的衰减，证实这种模糊神经网络控制方法可大大减少路面对车身的振动冲击，提高汽车行驶平顺性。     

基于串联型模糊神经网络的汽车半主动悬架的研究

本文建立了五自由度汽车半主动悬架系统模型，提出一种用于汽车悬 半主动振动控制系统的模糊神经网络方法，对半主动悬架 计算机仿真和结果分析，并通过与被动悬架相比较，证明半主动悬架系统在减少振动，提高汽车平一方面要优于被动悬架。     

半主动悬架的SIRMs模糊控制算法研究

文章以车身垂向振动速度、车身垂向振动加速度、悬架动行程和轮胎动位移为输入项目,主动悬架所产生的阻尼力F作为输出量,即设计一个包含4个输入项目和1个输出量的半主动SRIM模糊控制模型,并进行了凸起路面和随机路面下的仿真分析,计算结果显示该控制方法相对于半主动悬架经典控制方法有着更好的控制效果。     

半主动悬架模糊控制仿真

为缓和路面传递给车身的冲击,改善汽车行驶的平顺性和操作稳定性,文章建立了二自由度1／4车体半主动悬架非线性动力学模型,利用MATLAB模糊逻辑控制工具箱设计半主动悬架的模糊控制器,通过运用MATLAB／SIMULINK,对悬架系统进行了仿真分析。结果表明,该控制方法能有效地降低车身垂直加速度、悬架的动挠度和车轮动载荷,提高了汽车的平顺性和操纵稳定性。     

凌志LS400电控半主动悬架的功能与故障自诊断

作为悬架质量的汽车之振动能否控制在最低水平，主要取决于悬架的减振特性。电控半主动悬架系统是根据悬架的位移，汽车的速度、转向、制动等传感器送来的信号，由电脑进行运算处理后控制电磁式执行元件，实施悬架的刚度与车身高度的自动调节，从而提高汽车的乘坐舒适性和操纵稳定性。     

电流变智能半主动悬架模糊PID控制

对带有电流变液智能阻尼器的半主动汽车悬架系统设计了一种模糊PID控制器。将半主动悬架簧载质量的位移及其导数作为模糊控制器的输入，PID控制器的3个增益参数作为其输出，利用电流变液智能阻尼器的阻尼力可随电压变化的特性来使车身的振动降为最小。仿真实验给出了最优被动悬架、固定参数PID控制智能半主动悬架和模糊PID控制智能半主动悬架在不同路面激励情况下的响应曲线。     

基于道路友好性的重载汽车悬架半主动控制研究

车辆的平顺性和道路友好性是反应车辆悬架性能的2个重要指标。为改善重载汽车在道路行驶中的友好性,基于7自由度重载汽车动力学模型,建立了半主动悬架系统的运动方程,设计了半主动悬架最优控制器,考虑路面不平度的随机激励,以车辆平顺性和道路友好性为控制目标,提出了车辆悬架的最优半主动控制策略,并且给出了详尽的推导过程。仿真分析结果表明:当汽车以20m/s的速度行驶在C级路面时,车身和驾驶室垂向加速度有效均方根值分别减少了3.42%和46.4%,轮胎对路面的破坏减少了2.10%;半主动控制悬架有效地保证了车辆行驶的平顺性,同时可减小车辆对路面的冲击作用,改善了车辆的悬架性能。     

基于轴距预瞄的半主动悬架模糊神经网络控制

应用模糊控制和神经网络控制理论,构建了1/2车辆的半主动悬架模型,设计了基于轴距预瞄的半主动悬架模糊神经网络控制系统.对前轮半主动悬架采用以对应处车身垂向加速度为目标的模糊控制,对后轮半主动悬架采用轴距预瞄模糊控制,并利用神经网络来调整模糊控制器的控制规则和隶属度函数.在不同车速下对所建的控制系统分别进行了白噪声和路面脉冲输入的仿真.结果表明,与传统的被动系统相比,轴距预瞄模糊神经网络控制的半主动悬架系统能有效降低车辆振动;与模糊控制的半主动悬架系统相比,质心垂向加速度和后轮对应处车身加速度均有显著减小,较好地改善了车辆的行驶平顺性.     

基于ILMI算法的车辆半主动悬架静态输出反馈控制

针对采用磁流变阻尼器的1/4汽车半主动悬架模型进行振动控制分析。利用迭代线性矩阵不等式(ILMI)算法在输出反馈控制中的求解优势,提出基于ILMI算法的半主动悬架静态输出反馈控制方法。仿真结果表明,结合合适的控制算法,采用磁流变阻尼器的半主动悬架系统有效地改善了汽车驾驶平顺性和乘坐舒适性。     

Semi-active H∞ control of high-speed railway vehicle suspension with magnetorheological dampers

In this paper, semi-active H∞ control with magnetorheological (MR) dampers for railway vehicle suspension systems to improve the lateral ride quality is investigated. The proposed semi-active controller is composed of a H∞ controller as the system controller and an adaptive neuro-fuzzy inference system (ANFIS) inverse MR damper model as the damper controller. First, a 17-degree-of-freedom model for a full-scale railway vehicle is developed and the random track irregularities are modelled. Then a modified Bouc–Wen model is built to characterise the forward dynamic characteristics of the MR damper and an inverse MR damper model is built with the ANFIS technique. Furthermore, a H∞ controller composed of a yaw motion controller and a rolling pendulum motion (lateral motion+roll motion) controller is established. By integrating the H∞ controller with the ANFIS inverse model, a semi-active H∞ controller for the railway vehicle is finally proposed. Simulation results indicate that the proposed semi-active suspension system possesses better attenuation ability for the vibrations of the car body than the passive suspension system.     

基于磁流变阻尼器的半主动车辆座椅悬架模糊控制研究

设计基于磁流变阻尼器的半主动车辆座椅悬架系统的模糊控制器。用ADAMS对系统建立三维多刚体动力学模型,用MATLAB设计系统模糊控制器,并联合两者对整个系统进行仿真。仿真和台架试验结果表明,模糊控制策略能使该系统较好抑制垂直振动加速度,提高乘坐的舒适性。     

Semi-Active Attitude and Vibration Control

The paper discusses the attitude and vibration control of a passenger car on the basis of a full vehicle model. The analysis presented consists of two parts: (I) The introduction of a newly developed semi-active anti-roll/pitch system, (ii) An example of an actively suspended full vehicle model using a simple control strategy to improve ride comfort. The attitude control using semi-actively generated compensation forces prevents the car from rolling in curves and pitching during braking or accelerating. The strength of the system is the small energy consumption. The performance of the combination of both attitude and vibration control can compete with a fully active suspension system.     

一种引入行驶状态识别的半主动悬架PID控制修正算法

基于车辆不同行驶状态（路面不平度和车速）下悬挂质量垂向加速度和悬架动挠度响应不相同的客观事实,针对半主动悬架PID控制器无自适应能力的局限,以悬挂质量垂向加速度和悬架动挠度响应作为车辆行驶状态的识别判据．建立起一种引入行驶状态识别的半主动悬架PID控制修正算法,进而以某型轿车为对象,采用MATLAB／Simulink建立起半主动悬架PID控制的仿真模型,针对不同行驶状态计算出PID控制算法修正前、后的车辆平顺性响应并加以对比,表明所提出的PID控制修正算法是有效的。     

Semi-active suspension systems for railway vehicles using magnetorheological dampers. Part II: simulation and analysis

In this paper, the semi-active suspension system for railway vehicles based on the controlled (MR) fluid dampers is investigated, and compared with the passive on and passive off suspension systems. The lateral, yaw, and roll accelerations of the car body, trucks, and wheelsets of a full-scale railway vehicle integrated with four MR dampers in the secondary suspension systems, which are in the closed and open loops respectively, are simulated under the random and periodical track irregularities using the established governing equations of the railway vehicle and the modelled track irregularities in Part I of this paper. The simulation results indicate that (1) the semi-active controlled MR damper-based suspension system for railway vehicles is effective and beneficial as compared with the passive on and passive off modes, and (2) while the car body accelerations of the railway vehicle integrated with semi-active controlled MR dampers can be significantly reduced relative to the passive on and passive off ones, the accelerations of the trucks and wheelsets could be increased to some extent. However, the increase in the accelerations of the trucks and wheelsets is insignificant.     

Skyhook and H8 Control of Semi-active Suspensions: Some Practical Aspects

Summary This paper deals with single-wheel suspension car model. We aim to prove the benefits of controlled semi-active suspensions compared to passive ones. The contribution relies on H 8 control design to improve comfort and road holding of the car under industrial specifications, and on control validation through simulation on an exact nonlinear model of the suspension. Note that we define semi-active suspensions as control systems incorporating a parallel spring and an electronically controlled damper. However, the type of damper used in automotive industry can only dissipate energy. No additional force can be generated using external energy. The control issue is then to change, in an accurate way, the damping (friction) coefficient in real-time. This is what we call semi-active suspension. For this purpose, two control methodologies, H 8 and Skyhook control approaches, are developed, using a linear model of the suspension, and compared in terms of performances using industrial specifications. The performance analysis is done using the control-oriented linear model first, and then using an exact nonlinear model of the suspension incorporating the nonlinear characteristics of the suspension spring and damper.     

Skyhook and H8 Control of Semi-active Suspensions: Some Practical Aspects

Summary This paper deals with single-wheel suspension car model. We aim to prove the benefits of controlled semi-active suspensions compared to passive ones. The contribution relies on H 8 control design to improve comfort and road holding of the car under industrial specifications, and on control validation through simulation on an exact nonlinear model of the suspension. Note that we define semi-active suspensions as control systems incorporating a parallel spring and an electronically controlled damper. However, the type of damper used in automotive industry can only dissipate energy. No additional force can be generated using external energy. The control issue is then to change, in an accurate way, the damping (friction) coefficient in real-time. This is what we call semi-active suspension. For this purpose, two control methodologies, H 8 and Skyhook control approaches, are developed, using a linear model of the suspension, and compared in terms of performances using industrial specifications. The performance analysis is done using the control-oriented linear model first, and then using an exact nonlinear model of the suspension incorporating the nonlinear characteristics of the suspension spring and damper.     

轿车悬架最优减振特性的研究

本文提出了轿车悬架最优减振特性的新概念,建立了上海桑塔纳轿车的随机振动模型,模型中考虑了车身质心垂直振动及侧倾与纵倾,还考虑了横向稳定杆的作用,利用随机振动理论和动态优化理论寻求该车的最优减振特性曲线和准最优减振特性曲线的表达式,为今后设计主动式悬架的调节特性提供了依据。