汽车悬架系统磁流变减振器的数学模型及其试验研究

基于磁流变减振器的汽车悬架系统具有明显的滞后非线性,系统中的非线性阻尼和非线性刚度等对其动力学行为产生了很大的影响。影响汽车平顺性的主要因素是车身的垂直振动。为了描述这种振动,建立了汽车悬架系统的力学模型及其动力学方程,并结合阻尼特性试验,利用不同的数学模型描述了磁流变减振器的非线性滞后特性和饱和特性。     

基于状态空间法的四分之一车辆模型分析

悬架系统是车辆行驶系统中的一个重要组成部分,主要用于吸收和缓冲车辆行驶过程中来自车轮和路面接触产生的振动,车辆行驶的平顺性主要靠悬架系统来保证。本文采用两自由度四分之一车辆模型对悬架系统动力学模型进行建模,结合状态空间分析法分析不同悬架等效刚度和阻尼、不同轮胎等效刚度、不同车辆载重等情况下对车辆行驶平顺性的影响,为悬架的优化设计提供参考。     

汽车悬架系统非线性参数时域优化及应用

针对国产某微型轿车,在建立汽车悬架系统5自由度模型和时域路面模型基础上,对悬架系统的线性弹簧和非线性阻尼参数进行了优化。根据优化结果,对悬架系统的刚度和阻尼进行了匹配设计。经试验表明:座椅加速度自谱峰值减小7.4%,加速度均方根值减小19.4%,有效地改善了该车的行驶平顺性,证明时域优化方法对于悬架系统非线性参数优化是可行的。     

油气弹簧非线性特性对车辆平顺性的影响分析

推导并建立了某工程车辆油气弹簧的非线性刚度和阻尼特性的数学模型，并将其导入到车辆模型中。根据汽车悬架质量分配特点．将汽车简化为两自由度的舣质量振动系统，对此两自由度模型的车轮加速度、车身加速度和悬架动行程进行了仿真从仿真结果可以看出，非线性油气弹簧能很好地衰减由路面传递来的振动。分析了刚度和阻尼的变化对车辆平顺性的影响。     

非线性液压ISD悬架系统研究

在考虑摩擦、马达阻尼力以及流动压力损失的影响下,研究非线性对液压式惯容器-弹簧-阻尼(ISD)悬架性能的影响。文章建立了两级串联式非线性液压ISD悬架的整车模型,分析了飞轮转动惯量、马达排量、油液实际作用面积以及回流管等效长度这四个非线性参数对液压ISD悬架性能的影响,在仿真的基础上,进行了液压ISD悬架的整车台架试验研究,验证了非线性模型的正确性。研究结果可建立精确的非线性液压ISD悬架系统模型,为进一步提高主动、半主动ISD悬架的控制的有效性提供了支撑。     

非线性液压阻尼悬架的优化设计及最优控制

本文对二自由度非线液压阻尼悬架系统进行了统计线性分析，并提出这种半主动非线性液压阻尼悬架系统针对不同路况进行最优控制的控制策略；同时对非线性阻尼系统进行实时仿真，得出此类液压阻尼对振动的抑制优于线性阻尼的结论。     

空气悬架客车平顺性分析与优化

以某空气悬置客车为原型,建立其多体动力学模型,分析悬架系统中非线性弹性与阻尼元件对平顺性能的影响,并结合ADAMS软件运算原理,提出一种适用于其求解器的插值拟合优化方法,运用灵敏度分析等手段重新匹配悬架的刚度与阻尼,以提高车辆的乘坐舒适性。     

基于多体系统动力学的微型客车操纵稳定性DOE优化设计

利用多体系统动力学软件ADAMS建立了某微型客车动力学模型,并应用该模型对整车操纵稳定性进行了仿真分析.结合仿真数据利用ADAMS/Insight模块对前、后悬架系统中的刚度和阻尼进行了正交DOE优化,通过对优化结果的分析提出前、后悬架系统刚度值和阻尼值的3组合理匹配组合,最后通过3种组合在试验样车上的主观评价结果确定了前、后悬架刚度值和阻尼值.     

新型复合橡胶悬架变刚度承载特性的研究

分析了理想悬架的刚度特性以及传统橡胶悬架的不足,提出了满足变刚度要求的智能组合式橡胶悬架力学模型,并根据这一力学模型设计了可实现空载、满载工况下具有变刚度特性的组合式橡胶悬架结构.试验结果表明,该组合式橡胶悬架具有能够提供非线性变刚度的特性,特别适用于载货汽车使用.     

基于平顺性的四轴重型商用车悬架参数优化

为提高车辆行驶平顺性,建立某四轴重型商用车悬架动力学模型,并对悬架参数进行优化。模型中,在车辆结构上考虑了平衡悬架和驾驶室,在悬架力学特性上考虑了阻尼非线性。采用遗传算法对车辆悬架的刚度特性和阻尼特性进行优化,优化综合考虑了车辆在不同路面等级下以不同车速行驶的平顺性。对优化前后驾驶室处垂直加速度均方值进行仿真对比,结果显示,优化后车辆行驶平顺性得到有效提高。     

Optimal selection of suspension parameters in large scale vehicle models

Optimum values are selected for the suspension damping and stiffness parameters of complex car models, subjected to road excitation, by applying suitable numerical methodologies. These models result from a detailed finite-element discretisation and possess a relatively large number of degrees of freedom. They also involve strongly nonlinear characteristics, due mostly to large rigid body rotation of some of their components and the properties of the connection elements. First, attention is focused on gaining some insight into the dynamics of the mechanical models examined, resulting when the vehicle passes over roads involving typical geometric profiles. Then, the emphasis is shifted to presenting results obtained by applying appropriate optimisation methodologies. For this purpose, three classes of design criteria are first set up, referring to passenger ride comfort, suspension travel and car road holding and yielding the most important suspension stiffness and damping parameters. Originally, the optimisation is performed by forming a composite cost function and employing a single-objective optimisation method. Since the design criteria are conflicting, a multi-objective optimisation methodology is also set up and applied subsequently.     

Active Control of Non-stationary Response of Vehicles with Nonlinear Suspensions

Active control of non-stationary response of a single degree of freedom vehicle model with nonlinear passive suspension elements is considered in this paper. The method of equivalent linearization is used to derive the equivalent linear model and the optimal control laws are obtained by using stochastic optimal control theory based on full state information. Velocity squared quadratic damping and hysteresis type of stiffness nonlinearities are considered. The effect of the nonlinearities on the active system performance is studied. The performance of active suspensions with nonlinear passive elements is found to be superior to the corresponding passive suspension systems.     

Active Control of Non-stationary Response of Vehicles with Nonlinear Suspensions

SUMMARY

Active control of non-stationary response of a single degree of freedom vehicle model with nonlinear passive suspension elements is considered in this paper. The method of equivalent linearization is used to derive the equivalent linear model and the optimal control laws are obtained by using stochastic optimal control theory based on full state information. Velocity squared quadratic damping and hysteresis type of stiffness nonlinearities are considered. The effect of the nonlinearities on the active system performance is studied. The performance of active suspensions with nonlinear passive elements is found to be superior to the corresponding passive suspension systems.     

空间缆索自锚式悬索桥动力特性及刚度影响规律

空间缆索自锚式悬索桥的主缆直接锚固在加劲梁上,同时由于主缆的空间特性,与地锚式悬索桥及传统平面索相比,其动力性能存在很大的差异.针对青岛海湾大桥大沽河航道桥建立非线性空间有限元模型,对其动力特性及结构刚度影响规律进行了分析.结果表明,该桥振型基本合理,具有密布的频谱;作为自锚式悬索桥其整体刚度较低,固有周期较长;单柱式桥塔的横向刚度较弱,横向振动出现较早;另外,由于缆索横向间距较小,刚度较小,前10阶振型中有5阶索振.各振型受结构刚度的影响不同,主缆刚度主要影响悬索桥的1阶竖弯及扭转,加劲梁竖向刚度对加劲梁1阶竖弯及加劲梁扭转振型影响较大,横向刚度主要影响悬索桥的加劲梁横向振型,扭转刚度主要影响悬索桥的1阶扭转振型;主塔纵向刚度主要影响悬索桥的纵飘振型;横向刚度主要影响索塔的1阶横向振型.     

A new method of identification of equivalent suspension and damping rates of full-vehicle model

ABSTRACT

The equivalent spring and damper are often used to simplify the dynamic analysis of a nonlinear full-vehicle model. Clearly, those rates are strongly influenced by the kinematics of a suspension mechanism. This paper presents a new approach to the identification of the equivalent suspension and damping rates. The suspension is considered as a 1-degree-of-freedom (DOF) spatial parallel mechanism. The instantaneous kinestatic relations of the 1-DOF spatial parallel mechanism can be described using the theory of screws. The process of identification of the rates involves three steps: first, the joint positions of the suspension are found from the displacement analysis of the suspension mechanism. Second, the motion of each wheel of four suspension mechanisms is represented by the corresponding instantaneous screw at any instant. Third, the equivalent suspension and damping rates are determined from the kinestatic relations of the instantaneous screw. These rates are used for the dynamic analysis of the nonlinear full-vehicle model consisting of two pairs of the front (double-wishbone) and rear (multi-link) suspensions. Two dynamic behaviours of a car are analysed and compared with the simulation utilising the Adams/View software.     

轻型商用车悬架匹配

为优化某轻卡乘坐舒适性,首先对悬架系统的刚度、阻尼匹配过程进行了分析总结,给出了悬架刚度、阻尼的匹配流程。然后针对某些受开发周期及资源限制,无法进行实车调校及精确仿真的车型给出了基于理论计算及统计数据的悬架阻尼匹配方法。从阻尼比选择,各速度段阻尼比分布,双向比分布等方面分析,总结了方便、快速,且实车验证切实有效的悬架系统阻尼匹配方法。     

Roll and pitch independently tuned interconnected suspension: modelling and dynamic analysis

In this paper, a roll and pitch independently tuned hydraulically interconnected passive suspension is presented. Due to decoupling of vibration modes and the improved lateral and longitudinal stability, the stiffness of individual suspension spring can be reduced for improving ride comfort and road grip. A generalised 14 degree-of-freedom nonlinear vehicle model with anti-roll bars is established to investigate the vehicle ride and handling dynamic responses. The nonlinear fluidic model of the hydraulically interconnected suspension is developed and integrated with the full vehicle model to investigate the anti-roll and anti-pitch characteristics. Time domain analysis of the vehicle model with the proposed suspension is conducted under different road excitations and steering/braking manoeuvres. The dynamic responses are compared with conventional suspensions to demonstrate the potential of enhanced ride and handling performance. The results illustrate the model-decoupling property of the hydraulically interconnected system. The anti-roll and anti-pitch performance could be tuned independently by the interconnected systems. With the improved anti-roll and anti-pitch characteristics, the bounce stiffness and ride damping can be optimised for better ride comfort and tyre grip.