Comparison of robust H<Subscript>∞</Subscript> filter and Kalman filter for initial alignment of inertial navigation system

There are many filtering methods that can be used for the initial alignment of an integrated inertial navigation system. This paper discussed the use of GPS, but focused on two kinds of filters for the initial alignment of an integrated strapdown inertial navigation system （SINS）. One method is based on the Kalman filter （KF）, and the other is based on the robust filter. Simulation results showed that the filter provides a quick transient response and a little more accurate estimate than KF, given substantial process noise or unknown noise statistics. So the robust filter is an effective and useful method for initial alignment of SINS. This research should make the use of SINS more popular, and is also a step for further research.     

Application of H∞ filtering in the initial alignment of strapdown inertial navigation system

In this paper , the principle of H∞ filtering is discussed and H∞ filter is constructed, which is used in the initial alignment of the strapdown inertial navigation systems(SINS). The error model of SINS is derived. By utilizing constructed H∞ filter, the filtering calculation to that system has been conducted. The simulation results of the misalignment angle are given under the condition of unknown noises. The results show that the process of alignment with H∞ filter is much faster and with excellent robustness.     

Research on integrated navigation method for AUV

The principles of the SINS/DVL integrated navigation system are introduced, and the compass status accuracy is compared. When the heading is changed, the dead reckoning algorithm using the heading information of the SINS （Strapdown inertial navigation systems） and DVL （doppler velocity log） is adopted to substitute the SINS/DVL integrated system. The simulation results show that the method can improve the accuracy of integrated navigation system when AUV （autonomous underwater vehicle） is in motion.     

Application of H~∞ control in rudder/flap vector robust control of a ship's course

Given the uncertainty of parameters and the random nature of disturbances that effect a ships course, a robust course controller should be designed on the basis of rudder/flap vector control. This paper analyzes system uncertainty, and the choice of weighting functions is also discussed. When sea waves operate on a ship, the energy-concentrating frequency varies with the angle of encounter. For different angles of encounter, different weighting functions are designed. For the pole of a nominal model existing in an imaginary axis, the bilinear-transform method is used. The "2-Riccati" equation is adopted to solve the H∞ controller. A system simulation is given, and the results show that, compared with a PID controller, this system has higher course precision and more robust performance. This research has significant engineering value.     

Application of H∞ control in rudder/flap vector robust control of a ship＇s course

Given the uncertainty of parameters and the random nature of disturbances that effect a ships course, a robust course controller should be designed on the basis of rudder/flap vector control. This paper analyzes system uncertainty, and the choice of weighting functions is also discussed. When sea waves operate on a ship, the energy-concentrating frequency varies with the angle of encounter. For different angles of encounter, different weighting functions are designed. For the pole of a nominal model existing in an imaginary axis, the bilinear-transform method is used. The ＂2-Riccati＂ equation is adopted to solve the H∞ controller. A system simulation is given, and the results show that, compared with a PID controller, this system has higher course precision and more robust performance. This research has significant engineering value.     

Design optimization of a torpedo shell structure

An optimized methodology to design a more robust torpedo shell is proposed. The method has taken into account reliability requirements and controllable and uncontrollable factors such as geometry, load, material properties, manufacturing processes, installation, etc. as well as human and environmental factors. The result is a more realistic shell design. Our reliability optimization design model was developed based on sensitivity analysis. Details of the design model are given in this paper. An example of a torpedo shell design based on this model is given and demonstrates that the method produces designs that are more effective and reliable than traditional torpedo shell designs. This method can be used for other torpedo system designs.     

Research on catastrophe control in 1-D system

A new method of catastrophe control is described in one dimension nonlinear system. Catastrophe control based on catastrophe theory is a brand new area for control theory. A certain catastrophe is created at a desired location by appropriate control, which has preferred properties. Washout filter is presented and applied to preserve the original equilibrium of a system.Washout filter aided dynamic feedback controller is developed for the creation of eatastrophe, and an example is given to illustrate the process. Catastrophe control may provide a new way of designing warning signals of impending collapse or catastrophe for monitoring and control purposes.     

Route design and automatic check in electronic chart display and information system

For an electronic chart display and information system ( ECDIS), the most important function is the route design. In this paper,a novel approach to developing ECDIS was given and then an effective method was proposed for route design and automatic check. The mathematical model and logical relationship for coordinate transformation were also provided. They were adopted in ECDIS developing, which was based on the research of the Vxworks real-time operating system. The actual system application implies that the method is practical and can held navigation verv well.     

The solution of minimum reliability arbitrary curved beam index for modified weak point of under pure bending

This paper is based on the fundamental loading model of pure bending and the analytical model of a circular beam element with arbitrary initial deflection. The L.W. Guo solution is modified and generalized according to the elastic theory, and the analytical solution for the stress of the beam element with arbitrary initial deflection under pure bending is derived. Using yield theory of edge strength, an expression for the safety margin of one point in the arbitrary curved beam under pure bending （ACPB） is built. This paper modifies the model for weak points of service structures and establishes a foundation for safe design and inspection of imperfect structures. Also, according to the theory of the method of advanced first-order second-moment（AFOSM） , this paper derives an expression for the reliability index of one point in ACPB. Lastly, it modifies the solution for weak points by solving the minimal reliability index.     

A method of multi-channel reference signals acquiring in broadband ANC

In a flank array on an unmanned underwater vehicle （UUV）, self-generated noise which has broadband and colored spectrum property in frequency and spatial domain is the main factor affecting the performance of weak signal detection, so the technique of adaptive noise cancellation （ANC） as well as physical denoising and active noise cancellation are often used in practice. Because ANC is based on correlations, improvements in performance come from better correlation between reference signals and primary signals. Taking full advantage of the characteristics of flank arrays and the characteristics of information obtained from hydrophones, a new method for reference signal acquisition for adaptive noise cancellation is proposed, in which the multi-channel reference signals are obtained by accurate delaying for a given direction of arrival （DOA） and differencing between adjacent outputs of array elements. The validity of the proposed method was verified through system modeling simulations and lake experiments which showed good performance with little additional computational burden.     

具有惯性表面的两层流体的柯西-泊松问题(英文)

This paper is concerned with the generation of waves due to initial disturbances at the upper surface of a two-layer fluid, as the upper layer is covered by an inertial surface and the lower layer extends infinitely downwards. The inertial surface is composed of thin but uniform distribution of non-interacting material. In the mathematical analysis, the Fourier and Laplace transform techniques have been utilized to obtain the depressions of the inertial surface and the interface in the form of infinite integrals. For initial disturbances concentrated at a point, the inertial surface depression and the interface depression are evaluated asymptotically for large time and distance by using the method of stationary phase. They are also depicted graphically for two types of initial disturbances and appropriate conclusions are made.     

Robust autopilot with wave filter for ship steering

Research was done to overcome traditional problems associated with automatic steering systems of a ship in a seaway. A ship＇ s dynamic model with wave disturbances was built and a wave filter was designed by means of an extended states observer （ESO）. The model estimated the low frequency motion component from a heading measurement corrupted by colorednoise, so back-and-forth steering caused by high frequency wave disturbances was avoided. At the same time, a robust autopilot system, designed by variable structure control theory, was presented. Simulation results achieved in dangerous sea status show that the wave filter works very well and the autopilot has strong robustness to environmental disturbances and model perturbation, and more importantly, the frequency of rudder adjustments is reduced noticeably.     

水下无人潜航器航向H_∞鲁棒容错控制器设计(英文)

In order to improve the security and reliability for autonomous underwater vehicle (AUV) navigation, an H∞ robust fault-tolerant controller was designed after analyzing variations in state-feedback gain. Operating conditions and the design method were then analyzed so that the control problem could be expressed as a mathematical optimization problem. This permitted the use of linear matrix inequalities (LMI) to solve for the H∞ controller for the system. When considering different actuator failures, these conditions were then also mathematically expressed, allowing the H∞ robust controller to solve for these events and thus be fault-tolerant. Finally, simulation results showed that the H∞ robust fault-tolerant controller could provide precise AUV navigation control with strong robustness.     

Integrated Control System for First Tidal Flow Electricity Generating Ship of China

This paper introduces the composition, control method and testing results of the integrated control system for the firsttidal flow electricity generating (TFEG) ship of China. The control method, control algorithm and the specific circuits for thehydraulies system are also introduced. Our research works are emphasized on the control algorithm of stabilizing frequency andsome special problems of the controller.The related protection measures for hydraulic system and TFEG system have been tak-     

航行于波浪中的肥大型船波浪增阻计算研究(英文)

Under the background of the energy saving and emission reduction, more and more attention has been placed on investigating the energy efficiency of ships. The added resistance has been noted for being crucial in predicting the decrease of speed on a ship operating at sea. Furthermore, it is also significant to investigate the added resistance for a ship functioning in short waves of large modern ships. The researcher presents an estimation formula for the calculation of an added resistance study in short waves derived from the reflection law. An improved method has been proposed to calculate the added resistance due to ship motions, which applies the radiated energy theory along with the strip method. This procedure is based on an extended integral equation (EIE) method, which was used for solving the hydrodynamic coefficients without effects of the irregular frequency. Next, a combined method was recommended for the estimation of added resistance for a ship in the whole wave length range. The comparison data with other experiments indicate the method presented in the paper provides satisfactory results for large blunt ship.     

Dynamic analysis of multibodies system with a floating base for rolling of ro-ro ship caused by wave and slip of heavy load

Common effect of wave and slip of internal heavy load will make rolling of the roll-on ship serious. This is one of the important reasons for overturn of ro-ro ships. The multibodies System with a floating base is composed of ro-ro ship and slipping heavy load. This paper takes the rolling angle of the ship and the transverse displacement of the heavy load on desk as two freedoms. Making use of analysis of apparent gravitation and apparent buoyaney, the wave rolling moment is derived. By use of dynamic method of multibodies system with a floating base, dynamic equations of the system are established. Taking a certain channel ferry as an example, a set of numerical calculation have been carried out for rolling response of the ship and displacement response of the slipping heavy load under common effect of synchro-slipping heavy loads and wave.     

Robust digital image watermarking against shearing based on haar orthogonal function system

In this paper, a robust digital watermarking method against shearing based on Haar orthogonal function system was introduced. The proposed method adopted the complete generalized orthogonal properties of Haar orthogonal function system to achieve the piece -based orthogonal transform on the image. The significant middle frequency coefficients in the transformation matrix are picked up, based on characteristics of the image visual system and the Haar orthogonal transform. The watermark is adoptively weighed to the middle frequency matrix. The method improves the validity of watermarking and shows excellent advantage against shearing attack. Experimental results show that the Haar orthogonal function system based watermark approach can provide an excellent protection under geometric attacks.     

Review of containership stowage plans for full routes

Containership stowage plans are a pivotal teaches in the system of container transportation.With the increasing containers shipping,planning containership stowage has become more and more complicated.So intelligent stowage planning for containerships is of great significance.An effective stowage plan may improve efficiency of transportation system.First,the progress of containership stowage plan at home and abroad is reviewed,including the latest developments,such as the application of various optimization methods and computer techniques to the problem.Then,the complexities of the problem are discussed and areas where investigations are still needed are pointed out.This will provide a reference for further research on the subject.     

Cooperative path following control of UAV and USV cluster for maritime search and rescue北大核心CSCD

［Objectives ］ This paper studies a three-dimensional (3D) cooperative path-following control problem in the process of maritime search and rescue for a heterogeneous unmanned cluster system composed of unmanned aerial vehicles (UAVs) and unmanned surface vehicles (USVs).［Methods ］ First, kinematic models of the UAVs and USVs are established under a fixed coordinate system and body coordinate system. In order to design a 3D path-following controller suitable for motion control, an air coordinate system is established, and the path tracking error models of the UAVs and USVs are established in the Serret-Frenet coordinate system. Next, a 3D line-of-sight (LOS) guidance law is designed at the kinematic level, and a cooperative path-following control method suitable for heterogeneous clusters of marine vehicles is proposed, allowing the UAVs and USVs to track the preset parameterized path. Finally, the stability of the control system is analyzed based on the Lyapunov stability theory.［Results］The simulation results verify the effectiveness of the proposed cooperative path-following control method for heterogeneous clusters of marine vehicles.［Conclusions］The results of this study can provide references for maritime search and rescue by using the proposed cooperative path-following control method. © 2022 Journal of Clinical Hepatology. All rights reserved.     

A method based on potential theory for calculating air cavity formation of an air cavity resistance reduction ship

This research is intended to provide academic reference and design guidance for further studies to determine the most effective means to reduce a ship’s resistance through an air-cavity. On the basis of potential theory and on the assumption of an ideal and irrotational fluid, this paper drives a method for calculating air cavity formation using slender ship theory then points out the parameters directly related to the formation of air cavities and their interrelationships. Simulations showed that the formation of an air cavity is affected by cavitation number, velocity, groove geometry and groove size. When the ship’s velocity and groove structure are given, the cavitation number must be within range to form a steady air cavity. The interface between air and water forms a wave shape and could be adjusted by an air injection system.