共查询到18条相似文献,搜索用时 375 毫秒
1.
2.
3.
4.
5.
阐述可调螺距螺旋桨桨叶静平衡的要求及单个叶片静平衡试验的目的,并对单个叶片的多种静平衡试验方法进行了分析和比较。 相似文献
6.
7.
本文在总结生产实践经验的基础上,针对可调螺距螺旋桨单片桨叶静不平衡试验方法,逐一对两点支撑法、三点支撑法、力矩法所采用的装置和具体操作规程、注意事项进行了详细叙述,同时对这些装置和试验方法的特点、适宜性以及对实际静不平衡试验测量结果的评判、出现不平衡量超标后所采取的控制和处置手段进行了分析、论述,为从事调距桨桨叶的工艺设计、生产操作、静不平衡试验、检验的工作人员提供了有益的借鉴和参考. 相似文献
8.
9.
10.
11.
12.
文章针对可调桨桨叶在受到重大损伤经焊补修复后对桨叶螺距和可调桨静平衡的检测进行了探索和研究,设计适合可调桨修理专用的检测装置,成功地消除可调桨所存在的螺距和静不平衡量偏差超差的缺陷,有效地提高了可调桨修理的检测精度,取得了显著的效果。 相似文献
13.
主要对现有规范中的整桨静平衡方法进行了拓展,给出了通过试验数据计算静平衡用工艺装置的心轴的摩擦力矩和整桨的偏心距的方法,弥补了原有规范中方法的不足,并给出了三叶至七叶螺旋桨的具体计算公式,方便工程技术人员的具体应用。 相似文献
14.
本文分析了应用导轮装置可将常规螺旋桨尾流能量转换为推进功率的原理,给出了以升力线理论为基础的导轮设计方法。为了检验给出理论公式的实际设计效果,对一条2000t的综合节能船作了螺旋桨/导轮组合推进装置的设计,在空泡水筒内进行了单独螺旋桨和螺旋桨加导轮组合装置的对比模型试验。为了探讨螺旋浆加装导轮后尾流场的变化,在对比模型试验中,用一维大功率激光测速仪进行了尾流轴向和切向速度的测量。试验结果表明,常规螺旋浆加装导轮装置后,确可减少尾流中的能量损失,提高给出实例中的螺旋桨效率达10%,与理论设计预估结果相当一致。 相似文献
15.
16.
Michio Ueno Yasuo Yoshimura Yoshiaki Tsukada Hideki Miyazaki 《Journal of Marine Science and Technology》2009,14(4):469-484
Circular motion test data and uncertainty analysis results of investigations of the hydrodynamic characteristics of ship maneuvering
are presented. The model ships used were a container ship and two tankers, and the measured items were the surge and sway
forces, yaw moment, propeller thrust, rudder normal and tangential forces, pitch and roll angles, and heave. The test parameters
were the oblique angle and yaw rate for the conditions of a hull with a rudder and propeller in which the rudder angle was
set to zero and the propeller speed was set to the model self-propulsion conditions. Carriage data showing the accuracy of
the towing conditions in the circular motion test are also presented. It was confirmed that the uncertainties in the hydrodynamic
forces such as the surge and sway forces, yaw moment, rudder tangential and normal forces, and propeller thrust were fairly
small. The reported uncertainty analysis results of the circular motion test data may be beneficial in validating data quality
and in discussing reliability for simulation of ship maneuvering performance. 相似文献
17.