The use of hydrogen as a fuel for inland waterway units

Escalating apprehension about the harmful effects of widespread use of conventional fossil fuels in the marine field and in internal combustion engines in general, has led to a vast amount of efforts and the directing of large capital investment towards research and development of sustainable alternative energy sources. One of the most promising and abundant of these sources is hydrogen. Firstly, the use of current fossil fuels is. discussed focusing on the emissions and economic sides to emphasize the need for a new, cleaner and renewable fuel with particular reference to hydrogen as a suitable possible alternative. Hydrogen properties, production and storage methods are then reviewed along with its suitability from the economical point of view. Finally, a cost analysis for the use of hydrogen in internal combustion engines is carried out to illustrate the benefits of its use as a replacement for diesel. The outcome of this cost analysis shows that 98% of the capital expenditure is consumed by the equipment, and 68.3% of the total cost of the equipment is spent on the solar photovoltaic cells. The hydrogen plant is classified as a large investment project because of its high initial cost which is about 1 billion US$; but this is justified because hydrogen is produced in a totally green way. When hydrogen is used as a fuel, no harmful emissions are obtained.     

中国行将成为一个海运强国（三步发展的战略目标已经确定）

It is leamed from official sources that china's shipping development target for coming years has been set forth as follows;to continue expanding the investment scale of shipping construction and to enhance the reform of shipping industry so as to attain the three-phased general goal;     

Revival of Tanker Markets Depends ontheChineseEconomy

Interview to Diran M.Majarian,Managing Director of Amalia Tankers Inc..The outbreak of the Global Financial Crisis as well as major structural changes in global energy sources,have brought profound change to the tanker transport market.How shall we treat influences behind this deep change?And how can we judge the future of tankers transportation industry?With these problems,our correspondents gave an exclusive interview to Diran Majarian,Managing Director of Amalia Tankers Inc.ctor w h view c.     

应用GA,PSO,ACO算法进行水下自主运载器路径规划(英文)

In this paper,an underwater vehicle was modeled with six dimensional nonlinear equations of motion,controlled by DC motors in all degrees of freedom.Near-optimal trajectories in an energetic environment for underwater vehicles were computed using a numerical solution of a nonlinear optimal control problem(NOCP).An energy performance index as a cost function,which should be minimized,was defined.The resulting problem was a two-point boundary value problem(TPBVP).A genetic algorithm(GA),particle swarm optimization(PSO),and ant colony optimization(ACO) algorithms were applied to solve the resulting TPBVP.Applying an Euler-Lagrange equation to the NOCP,a conjugate gradient penalty method was also adopted to solve the TPBVP.The problem of energetic environments,involving some energy sources,was discussed.Some near-optimal paths were found using a GA,PSO,and ACO algorithms.Finally,the problem of collision avoidance in an energetic environment was also taken into account.     

导流板对弯管流激噪声和流致振动的影响(英文)

The effect of a guide vane installed at the elbow on flow-induced noise and vibration is investigated in the range of Reynolds numbers from 1.70×105 to 6.81×105, and the position of guide vane is determined by publications. The turbulent flow in the piping elbow is simulated with large eddy simulation(LES). Following this, a hybrid method of combining LES and Lighthill's acoustic analogy theory is used to simulate the hydrodynamic noise and sound sources are solved as volume sources in code Actran. In addition, the flow-induced vibration of the piping elbow is investigated based on a fluid-structure interaction(FSI) code. The LES results indicate that the range of vortex zone in the elbow without the guide vane is larger than the case with the guide vane, and the guide vane is effective in reducing flow-induced noise and vibration in the 90° piping elbow at different Reynolds numbers.     

Cold Winter Warmed by New Energy Vessels

Eco-environment protection was given an unprecedented emphasis at the 18th National People's Congress meeting.At the same time,with the continuous increase of fuel price and the introduction of stricter emission control regulations as well as shipping industry's focus on environmental protection,application of new energy on ships has attracted more and more attention.Investment from various parties is increasing,and some scientific research projects and real vessels that are relatively mature have emerged.     

The Safety Topic of“Oilto Gas”

As a new type of energy,LNG has aroused strong repercussions in the shipping market.The reason for this is that compared with traditional fuel,LNG has certain advantages both in energy conservation and emission reduction and in fuel costs.However,it can not be ignored that as a new type of energy,it has also     

Flow-induced Noise and Vibration Analysis of a Piping Elbow with/without a Guide Vane

The effect of a guide vane installed at the elbow on flow-induced noise and vibration is investigated in the range of Reynolds numbers from 1.70×10^5 to 6.81×10^5, and the position of guide vane is determined by publications. The turbulent flow in the piping elbow is simulated with large eddy simulation （LES）. Following this, a hybrid method of combining LES and Lighthill＇s acoustic analogy theory is used to simulate the hydrodynamic noise and sound sources are solved as volume sources in code Actran. In addition, the flow-induced vibration of the piping elbow is investigated based on a fluid-structure interaction （FSI） code. The LES results indicate that the range of vortex zone in the elbow without the guide vane is larger than the case with the guide vane, and the guide vane is effective in reducing flow-induced noise and vibration in the 90° piping elbow at different Reynolds numbers.     

The Latest Development Trend of Heavy Cargo Transport Ship

Like most industrial transport ships, the heavy cargo transport ship market and ship type development are dependent on other relative industries and market demands, such as energy resources and infrastructure construction. At present, there are two heavy cargo     

Numerical simulation on truncated oval-nosed projectile penetrating into stiffened plate北大核心CSCD

[Objectives]In this paper, the numerical simulation method is used to study the anti-penetration performance and energy absorption mode of a stiffened plate, as well as the influence of different stiffened bars on the flight attitude of the projectile body.[Methods] Finite element software LS-DYNA is used to simulate the process of a truncated oval-nosed projectile penetrating a stiffened plate, and the results of the numerical simulation are compared with an experiment to verify the reliability of the numerical simulation method. The momentum method and mass equivalence method are used to predict the residual velocity of the projectile, and the applicability of different theoretical methods within different velocity ranges is compared. The deformation energy of different regions of the stiffened plate is then extracted to analyze the influence of the initial velocity of the projectile body on the energy absorption mode of the target plate. Finally, the structure of the stiffeners is changed and the influence of the relative position of the stiffeners on the penetration attitude of the projectile body is analyzed.[Results]The results show that the mass equivalence method is more accurate than the momentum method in predicting the residual velocity of the stiffened plate when the initial velocity of the projectile body is in the range of 300–900 m/s. The ratio of the deformation energy of the stiffened plate to the energy loss of the projectile body decreases with the increase of the initial velocity of the projectile body. The effect of a T-stiffened plate on trajectory is greater than that of a rectangular-stiffened plate.[Conclusions]The related calculation method and research results have certain reference value for research and engineering application surrounding the anti-penetration of stiffened plates. © 2023 Chinese Journal of Ship Research. All rights reserved.     

Development of Offshore Wind Power Industry

The offshore wind power development target as initially proposed in "The 12=Five-Year" on energy recourses development and renewable energy recourses currently under development is to reach 5m KW by 2015 and 30m KW by 2020. With the unfolding of offshore wind turbine planning from different areas, the curtain of offshore wind power development for our country's "The 12=Five-Year" has been opened.     

近海风机叶片动力特性分析

The topic of offshore wind energy is attracting more and more attention as the energy crisis heightens.The blades are the key components of offshore wind turbines,and their dynamic characteristics directly determine the effectiveness of offshore wind turbines.With different rotating speeds and blade length,the rotating blades generate various centrifugal stiffening effects.To directly analyze the centrifugal stiffening effect of blades,the Rayleigh energy method (REM) was used to derive the natural frequency equation of the blade,including the centrifugal stiffening effect and the axial force calculation formula.The axial force planes and the first to third order natural frequency planes which vary with the rotating speed and length were calculated in three-dimensional coordinates.The centrifugal stiffening coefficient was introduced to quantitatively study the relationship between the centrifugal stiffening degree and the rotating speed,and then the fundamental frequency correction formula was built based on the rotating speed and the blade length.The analysis results show that the calculation results of the fundamental frequency correction formula agree with the theoretical calculation results.The error of calculation results between them is less than 0.5%.     

Big data of shipping industry is a rich mine

正At present,big data technologies have been successfully applied in many fields such as medical care,energy,communications,and e-commerce.In the shipping industry,some prophetic companies have tried and achieved some preliminary outcome.It is reported that countries such as Europe,Japan,and South Korea have carried out pre-research,data collection,and exploration of shipping big data     

振荡浮子式双浮体波浪能装置的阵列特性（英文）

As the energy supply problem worsens, the development and utilization of marine renewable energy have become a research hotspot. The development of wave energy is moving from the near shore to the distant sea. The power-generation efficiency of a single two-floating-body wave-energy converter is relatively low. To fully utilize wave energy and improve the wave-energy capture rate of a fixed sea area, arranging a two-floating-body wave-energy converter array is necessary. This paper first introduces the basic theory of multi-floating flow field, time-domain calculation method, and influence factor of the waveenergy converter array. Then, the development of AQWA software in Fortran language considers the effect of power takeoff.A calculation method based on ANSYS–AQWA is proposed to simulate the motion of the oscillating-buoy two-floating-body wave-energy converter. The results are compared with the experimental results from the National Renewable Energy Laboratory.Finally, the ANSYS–AQWA method is used to study the power characteristics of simple and complex arrays of wave-energy converters. The average power generation of simple arrays is largest at 0°, and the average power generation of complex arrays does not change with the wave direction. Optimal layout spacing exists for the simple and complex arrays. These findings can serve as a valuable reference for the large-scale array layout of wave-energy converters in the future.     

船舶SOFC燃料电池与汽轮机联合动力装置能效分析(英文)

Strong restrictions on emissions from marine power plants(particularly SOx,NOx)will probably be adopted in the near future.In this paper,a combined solid oxide fuel cell(SOFC)and steam turbine fuelled by natural gas is proposed as an attractive option to limit the environmental impact of the marine sector.The analyzed variant of the combined cycle includes a SOFC operated with natural gas fuel and a steam turbine with a single-pressure waste heat boiler.The calculations were performed for two types of tubular and planar SOFCs,each with an output power of 18 MW.This paper includes a detailed energy analysis of the combined system.Mass and energy balances are performed not only for the whole plant but also for each component in order to evaluate the thermal efficiency of the combined cycle.In addition,the effects of using natural gas as a fuel on the fuel cell voltage and performance are investigated.It has been found that a high overall efficiency approaching 60%may be achieved with an optimum configuration using the SOFC system.The hybrid system would also reduce emissions,fuel consumption,and improve the total system efficiency.     

Exciting forces for a wave energy device consisting of a pair of coaxial cylinders in water of finite depth

Two coaxial vertical cylinders-one is a riding hollow cylinder and the other a solid cylinder of greater radius at some distance above an impermeable horizontal bottom,were considered.This problem of diffraction by these two cylinders,which were considered as idealization of a buoy and a circular plate,can be considered as a wave energy device.The wave energy that is created and transferred by this device can be appropriately used in many applications in lieu of conventional energy.Method of separation of variables was used to obtain the analytical expressions for the diffracted potentials in four clearly identified regions.By applying the appropriate matching conditions along the three virtual boundaries between the regions,a system of linear equations was obtained,which was solved for the unknown coefficients.The potentials allowed us to obtain the exciting forces acting on both cylinders.Sets of exciting forces were obtained for different radii of the cylinders and for different gaps between the cylinders.It was observed that changes in radius and the gap had significant effect on the forces.It was found that mostly the exciting forces were significant only at lower frequencies.The exciting forces almost vanished at higher frequencies.The problem was also investigated for the base case of no plate arrangement,i.e.,the case having only the floating cylinder tethered to the sea-bed.Comparison of forces for both arrangements was carried out.In order to take care of the radiation of the cylinders due to surge motion,the corresponding added mass and the damping coefficients for both cylinders were also computed.All the results were depicted graphically and compared with available results.     

2016年国际船舶与其它浮式结构实用设计大会(PRADS’2016)（英文）

<正>September 4–8,2016Copenhagen,Denmark Today,proper and practical design of ships and other floating structures is as important as ever,since safety and efficiency are fundamental to any marine operation including technical operations on ships in a seaway,oil and gas production from floating offshore structures,installation,inspection and maintenance of structures for wave and wind energy harvesting,aqua culture,etc.On this account,Technical University of Denmark(DTU)is most delighted to be the     

The Secret War Behind EEDI

On Jan 1st 2013,EEDI formally came into force.This is a significant progress in reducing emissions from ships and is the outcome of the concerted efforts of IMO member states over a decade on reducing shipping emissions.Today,it seems that EEDI is a decided issue,however,as EU carbon tax for shipping is gaining momentum,the secret war surrounding ship energy conservation and emission reduction keeps going on.     

多弹性支撑设备的同步定相振动控制研究（英文）

This paper describes an analytical investigation into synchrophasing, a vibration control strategy on a machinery installation in which two rotational machines are attached to a beam-like raft by discrete resilient isolators. Forces and moments introduced by sources are considered, which effectively represent a practical engineering system. Adjusting the relative phase angle between the machines has been theoretically demonstrated to greatly reduce the cost function, which is defined as the sum of velocity squares of attaching points on the raft at each frequency of interest. The effect of the position of the machine is also investigated. Results show that altering the position of the secondary source may cause a slight change to the mode shape of the composite system and therefore change the optimum phase between the two machines. Although the analysis is based on a one-dimensional Euler–Bernoulli beam and each machine is considered as a rigid-body, a key principle can be derived from the results. However, the factors that can influence the synchrophasing control performance would become coupled and highly complicated. This condition has to be considered in practice.     

A new marine propulsion system

A new marine propulsion system is proposed . A small liquid sodium cooled reactor acts as prime mover; alkali-metal thermal-to-electric conversion (AMTEC) cells are employed to convert the heat energy to electricity; superconducting magneto-hydrodynamic thruster combined with spray-water thruster works as propulsion. The configuration and characteristics of this system are described. Such a nuclear-powered propulsion system is not only free of noise, but also has high reliability and efficiency. It would be a preferable propulsion system for ships in the future。