The crack tip fields of Mode Ⅱ stationary growth crack on bimaterial interface

A mechanical model is established for mode Ⅱ interfacial crack static growing along an elastic-elastic power law creeping bimaterial interface. For frictional contact of boundary conditions on crack faces, asymptotic solutions of the stresses and strains of near tip-crack are got. It was shown that in stable creep growing phase, elastic deformation and viscous deformation are equally dominant in the near-tip field, the stress and strain have the same singularity and there is not the oscillatory singularity the field. Through numerical calculation, it is shown that the frictional coefficient η notably influence the crack-tip field.     

Asymptotic field of mode Ⅱ dynamic growing crack in visco-elastic material

A mechanical model of visco-elastic material is established in order to investigate viscous effect in dynamic growing crack-tip field of mode Ⅱ. It is shown that in stable creep growing phase, elastic deformation and viscous deformation are equally dominant in the near-tip field, the stress and strain have the same singularity, namely, (σε) ∝r^-1/(n-1). The asymptotic solutions of separatied variables of stress, stain and displacement in crack-tip field are obtained by asymptotic analysis, and the results of numerical value of stress and strain in crack-tip field are obtained by shooting method. Through numerical calculation, it is shown that the near-tip fields are mainly governed by the creep exponent n and Mach number M. By the asymptotic analysis to the crack-tip field, the fracture criterion of mode Ⅱ dynamic growing crack of visco-elastic materials is put forward from the point of view of strain.     

通过形状差异修正模式方法进行的损伤识别试验(英文)

An experimental program was undertaken to test the feasibility to detect the occurrence of structural damage using a modified mode shape difference technique. The vibration response of a steel beam fixed at one end and hinged at the other was obtained for the intact and damage conditions. Modal analysis was performed to extract the frequencies and mode shapes. The method shows a good potential in detection of occurrence and location of damage.     

Analytical and experimental study of free vibration of beams carrying multiple masses and springs

The structures in engineering can be simplified intoelastic beams with concentrated masses and elastic spring supports.Studying the law of vibration of the beams can be a help in guidingits design and avoiding resonance. Based on the Laplace transformmethod, the mode shape functions and the frequency equations ofthe beams in the typical boundary conditions are derived. Acantilever beam with a lumped mass and a spring is selected toobtain its natural frequencies and mode shape functions. Anexperiment was conducted in order to get the modal parameters ofthe beam based on the NExT-ERA method. By comparing theanalytical and experimental results, the effects of the locations ofthe mass and spring on the modal parameter are discussed. Thevariation of the natural frequencies was obtained with the changingstiffness coefficient and mass coefficient, respectively. The findingsprovide a reference for the vibration analysis methods and thelumped parameters layout design of elastic beams used inengineering.     

Research on the fragment impact resistance of a composite mast

Due to the unique structural mode and material property of a composite sandwich plate, related research such as fragment impact resistance of a composite mast is short of publication and urgent in this field. In this paper, the commonly accepted sandwich core board theory was modified. Damage caused by a fragment attack was simulated onto a sandwich plate model built with solid and shell elements. It was shown that shear failure and vast matrix cracking are the main reasons for outer coat damage, and tension failure and partial matrix cracking are the cause for inner coat damage. Additionally, according to complexities in actual sea battles, different work conditions of missile attacks were set. Ballistic limit values of different fragment sizes were also obtained, which provides references for enhancing the fragment impact resistance of a composite mast.     

Research and development of a digital design system for hull structures

Methods used for digital ship design were studied and formed the basis of a proposed frame model suitable for ship construction modeling. Based on 3-D modeling software, a digital design system for hull structures was developed. Basic software systems for modeling, modifying, and assembly simulation were developed. The system has good compatibility, and models created by it can be saved in different 3-D file formats, and 2D engineering drawings can be output directly. The model can be modified dynamically, overcoming the necessity of repeated modifications during hull structural design. Through operations such as model construction, intervention inspection, and collision detection, problems can be identified and modified during the hull structural design stage. Technologies for centralized control of the system, database management, and 3-D digital design are integrated into this digital model in the preliminary design stage of shipbuilding.     

The asymptotic field of a dynamically growing crack in a viscoelastic materia

A mechanical model of a fracturing viscoelastic material was developed to investigate viscous effects in a dynamically growing crack-tip field. It was shown that in the stable creep-growing phase,elastic deformation and viscous deformation are equally dominant in the near-tip field,and stress and strain have the same singularity,namely,(σ,ε ) ∝ r?1 /( n?1) . The asymptotic solution of separating variables of stress,stain and displacement in the crack-tip field was obtained by asymptotic analysis,and the resulting numerical value of stress and strain in the crack-tip field was obtained by the shooting method and the boundary condition of a mode I crack. Through numerical calculation,it was shown that the near-tip fields are mainly governed by the creep exponent n and Mach number M . When n →∞,the asymptotic solution of a viscoelastic material can be degenerated into that of Freund's elastic-ideally plastic material by analyzing basic equations.     

浮式海上风力机运动性能和锚泊系统(英文)

The development of offshore wind farms was originally carried out in shallow water areas with fixed(seabed mounted) structures.However,countries with limited shallow water areas require innovative floating platforms to deploy wind turbines offshore in order to harness wind energy to generate electricity in deep seas.The performances of motion and mooring system dynamics are vital to designing a cost effective and durable floating platform.This paper describes a numerical model to simulate dynamic behavior of a new semi-submersible type floating offshore wind turbine(FOWT) system.The wind turbine was modeled as a wind block with a certain thrust coefficient,and the hydrodynamics and mooring system dynamics of the platform were calculated by SESAM software.The effect of change in environmental conditions on the dynamic response of the system under wave and wind loading was examined.The results indicate that the semi-submersible concept has excellent performance and SESAM could be an effective tool for floating wind turbine design and analysis.     

Numerical simulation of fatigue crack propagation under biaxial tensile loadings with phase differences

Fatigue crack propagation under the biaxial tensile loading, which loading directions are normal and parallel to the initial crack position, is highlighted in this study. Most of in-service structures and vessels are subjected to many types of loading. Generally, these loadings have different axial components with different phases. However, the structural integrities of structures and vessels are evaluated according to design codes based on theoretical and experimental investigations under a uniaxial loading condition. Most of these codes are based on the S–N curves approach. An approach that does not use S–N curves has been favored by researchers, with the fracture mechanics approach preferred for evaluating the fatigue life of structures. An advanced fracture mechanics approach was developed based on the Re-tensile Plastic zone Generating (RPG) stress criterion for fatigue crack propagation. In this study, fatigue crack propagation tests under biaxial loading with six different phase and loading conditions are performed and the effect of the phase difference under biaxial loading is evaluated. A numerical simulation method of fatigue crack propagation based on the RPG stress criterion under different biaxial loading phase conditions is presented and compared to measured data.     

深海超高压环境模拟容器裂纹评定

深海超高压环境模拟容器用于模拟水下压力环境,其容器壁上承受反复载荷,容易产生疲劳裂纹.疲劳裂纹扩展是影响其断裂的主要因素.本文旨在分析半椭圆裂纹在老化的深海超高压环境模拟容器中的扩展行为,评估容器的安全性,因此对材料20MnMoNb钢的裂纹扩展特性进行了试验研究,首先考虑三角形和梯形加载情况,通过比较两组实验结果,考察了其材料对保载时间的敏感性.采用基于统一的裂纹扩展率模型的三维有限元方法进行了疲劳裂纹扩展计算,并通过CT试样的一组数值和实验结果进行了验证,最后建立了不同初始尺寸、展弦比和倾角的裂纹有限元模型,并根据裂纹在容器内壁的容许深度准则,计算了容器的剩余寿命.其分析结果可为深海超高压环境模拟容器可靠性评估提供参考.     

基于累积塑性破坏的船体板低周疲劳裂纹扩展寿命研究

船体板的总体断裂破坏往往是低周疲劳破坏与累积塑性破坏两种破坏模式耦合作用的结果,故在船体板低周疲劳裂纹扩展寿命评估中,其基于累积塑性应变的船体板低周疲劳裂纹扩展寿命分析能够更为符合实际地评估船体板的总体断裂承载能力。船体板低周疲劳裂纹扩展寿命由宏观可检测裂纹扩展到临界裂纹而发生破坏这段区间的寿命。船体在实际航行中受到多次波浪外载作用而使其进入塑性变形不断累积或不断反复的破坏过程,并最终导致低周疲劳裂纹的萌生及扩展而使结构破坏,其破坏形式分别对应于增量塑性变形破坏（或棘轮效应）或交变塑性变形破坏（或低周疲劳）。局部塑性变形的累积会加剧低周疲劳裂纹不断扩展,因而基于累积塑性破坏研究船体板低周疲劳扩展寿命更为合理。文中以船体板单次循环载荷后塑性应变大小为基础,依据累积递增塑性破坏过程及弹塑性理论,计算经过N次变幅循环载荷后船体板累积塑性应变值,结合循环应力—应变曲线获得相应的稳定的迟滞回线,确定裂纹尖端应力应变曲线及确定相关塑性参量并依据选取的断裂判据判定裂纹扩展。建立循环载荷下基于累积递增塑性破坏的船体板低周疲劳裂纹扩展寿命的计算模型考虑应力比对此裂纹扩展寿命计算模型的影响。由该方法计算出的疲劳裂纹扩展寿命将对正确预估船舶结构的低周疲劳强度从而提高船舶安全性有重要意义。     

轴向冲击作用下玻璃纤维复合材料层合梁脱层及其扩展分析

玻璃纤维增强型复合材料层合梁在受轴向质量块冲击时,由于纤维铺层间的粘结强度较小,该区域易出现初始裂纹.进而扩展为脱层损伤.文章探讨了采用有限元数值模拟对脱层的产生与扩展进行建模、计算分析的方法.针对发生在纤维层问的脱层损伤,基于传统的应力失效准则,结合断裂力学的B-K能量失效准则,建立了混合失效准则来定义界面处的损伤规律,将发生脱层的潜在区域定义为粘结接触.计算结果与实验对比具有较好的一致性.     

船舶焊接钛合金拉伸疲劳断裂机理的研究

通过对TC4钛合金焊接试样拉伸疲劳断裂试验结果及其断口和卸载表面观察分析,发现试样断口上有明显的河流花纹走向和起裂源,并伴有韧窝和韧性条带特征。起裂源常位于断口表面角落附近。其断裂机理是疲劳拉伸载荷作用下,在应力值比较高的时候一些沿层裂纹开始出现并扩展,当疲劳裂纹的长度达到与疲劳外加力所匹配的临界裂纹长度时,突然发生准解理断裂。试样断口呈现出准解理与韧窝断裂的混合特征。     

裂纹前端局部加强板的韧性断裂分析

对局部加强含裂纹板的弹塑性断裂问题进行了分析计算.建立了裂纹前端局部加强的裂纹板弹塑性分析的Dug-dale模型,以裂纹尖端开口位移CTOD为断裂参数,就加强复板位置、结构参数及加强复板与裂纹板材料参数等因素对结构止裂性能的影响进行了分析计算.结果表明,在裂纹前端进行局部加强使裂纹尖端的塑性区长度减小,且降低了裂纹尖端的开口位移CTOD,能有效地阻止裂纹扩展.提高加强复板相对刚度有利于改善裂纹尖端状态,提高结构的承载能力.     

大开口船波浪载荷长期预报和弯扭强度整船有限元分析

大开口船全船弯扭联合变形与应力的精确计算，必须在整船结构模型上完成。本文以一艘5万吨级大开口船为例，用三维流体动力计算程序进行了波浪随机载荷的长期预报，并在此基础上导出设计波参数组，进而在全船整体结构有限元模型上计算了船体结构在各设计波上的应力分布，并采用嵌入精细舱口角区有限元网络的方法，在整船分析的同时计算出舱口角的应力集中值，获得了船体结构强度的详尽信息。文中阐述了波浪载荷的特点，设计波的确定，浮体完整结构计算的惯性平衡及大开口船的全船计算方法。     

Numerical simulation of level ice impact on landing craft bow considering the transverse isotropy of Baltic Sea ice based on XFEM

Ice bending is a major failure mechanism of level ice when ships and marine structures interact with level ice. This paper aims to investigate the ice bending and ice load when level ice collides on ships and marine structures using numerical simulation method, and compare the numerical results with field test. The fracture of ice is simulated with extended finite element method (XFEM), and cohesive zone concept is used to describe the crack propagation. In order to consider the characteristics of S2 columnar ice, a transversely isotropic elastic material model is used for the ice bulk elements, and a transversely isotropic Tsai-Wu failure criterion is adopted to predict the initiation of cracks. A well-controlled field test of a landing craft bow colliding with level ice in Baltic Sea is simulated to verify the numerical scheme. The ice plate's continuous deformation, crack initiation and crack propagation at different impact velocities and angles are simulated and the results are discussed. In the simulation, the bending crack emerges at the midline of the top surface of ice plate, then propagates towards free boundary, and finally a circumferential crack forms. It is found that with the impact velocity increases, the bending load increases and the fracture size (perpendicular distance from the crack to the contact edge) decreases. And as the angle between the landing craft bow and vertical direction increases, the bending load and the fracture size decrease. The simulated results corresponds well with the field test. The competition between the circumferential crack and radial crack is also found in the simulation and will be discussed in this paper. The results show that this method well simulates the bending of level ice and predict the ice load, and provides a good approach for investigating the mechanism of different forms of level ice fracture.     

穿透裂纹薄板拉伸强度影响参数的有限元分析

对穿透裂纹薄板拉伸强度的影响参数进行了有限元分析.分析结果表明,具有穿透裂纹的薄板的拉伸强度受到板的材料屈服强度、泊松比,裂纹长度、开裂角度、开裂位置,板的长宽比、厚度,边界加载条件以及有限元分析网格精度的影响.文中给出了这些因素的影响曲线以及考虑影响参数的穿透裂纹薄板拉伸强度经验计算公式.     

海船断裂控制设计准则

传统的断裂控制设计准则，如脆性转变温度准则或最低工作温度准则等，在实际断裂评定中，有时会遇到困难，其原因在于建立这些准则的条件与实际结构的服役条件存在差异。本文在分析材料断裂韧度的温度效应和载荷速率效应的基础上，根据海船工作条件构造了断裂特征分析图（Fracture Characteristic Analysis Map),提出了一个计及材料性能（断裂韧度，屈服强度）、环境因素（服役温度，载荷速率）和结构特点（板厚及平面应变约束）在内的海船断裂控制设计准则。应用该准则可根据对海船工作特性的要求，选择材料和预测结构的断裂行为，从而为防断选材、结构完整性评定、可靠性分析以及失效分析、预测、预防提供了定量的依据。该准则克服了传统断裂控制准则的局限性，可以全方位地模拟海船结构特点及工作条件，具有更满意的适用性。