空中爆炸载荷下PVC泡沫夹芯板动态响应分析

基于 Abaqus/Explicit,计算分析 PVC夹芯板在空爆载荷作用下的动态响应,考察夹芯板上面板厚度、芯层高度及炸药当量对其抗爆性能的影响,并从能量吸收的角度分析不同工况下 PVC夹芯板的吸能特性。数值结果表明夹芯板的动态响应对其结构配置比较敏感,增加上面板厚度及芯层高度可以明显减小下面板挠度,从而提高结构的抗爆性能。夹芯板的总体吸能量与上面板厚度密切相关,与芯层高度没有明显关联,减小上面板厚度可以提高结构的总体吸能量;在相同工况下,增加上面板厚度可以提高上面板吸能占比,增加芯层高度可以提高芯层吸能占比。在炸药当量较小时,夹芯板变形以上面板局部弯曲及芯层压缩为主;当炸药当量较大时,夹芯板变形以整体弯曲变形为主。研究结果对PVC夹芯板抗爆性能的优化设计具有一定的参考价值。     

Dynamic response of stiffened plate under internal blast: Experimental and numerical investigation

Stiffened plates are the basic units of ships, aircraft and other structures. The purpose of this paper is to investigate the dynamic response of stiffened plates under internal blast loading. A combined experimental and numerical investigation was carried out on the cabin structures with unstiffened, single-stiffened and double-stiffened plates. The characteristics of internal blast wave, the effects of stand-off distance and the stiffener position on the deflection and failure modes of stiffened plates were sequentially analyzed. It was interestingly found that the deflection first decreased and then increased with the increase of stand-off distance. Additionally, despite of the reinforcement on the deformation resistance, the stiffeners tended to reduce the damage tolerance of the target plates. This research provides the basic data and theoretical support for the blast resistance design of ships, aircraft and other structures.     

Optimisation of laser-welded sandwich panels with multiple design constraints

This paper investigates the possibilities for structural optimisation of laser-welded sandwich panels with an adhesively bonded core and uni-directional vertical webs. Closed form expressions for the equivalent stiffness and elastic buckling strength of laser-welded sandwich panels are discussed and numerically evaluated to demonstrate the effect of parameter variations on stress and deflection. Due to the number of design variables and constraints a structural optimisation method based on the method of moving asymptotes (MMA) is implemented and used to minimise the structural weight per square meter of panel for a typical accommodation deck configuration. It is concluded that, within the span of production parameters and rule requirements, substantial improvements can be made with or without an adhesively bonded core. Without core material and without any changes to the surrounding structure the structural weight for standard production panels can be reduced considerably, by reducing the face plate thickness and by using thinner and fewer webs. Additional weight can be saved by removing all but a few webs and injecting low-cost polyurethane foam into the cavities, giving added thermal–acoustic insulation, or by incorporating a more structural core with greater thickness and higher density, by which the free span of the sandwich panel can be increased.     

Ice impact response and energy dissipation characteristics of PVC foam core sandwich plates: Experimental and numerical study

In this paper, the dynamic responses and energy dissipation characteristics of polyvinyl chloride (PVC) foam core sandwich plates under ice impact are investigated. The ice impact tests of PVC foam core sandwich plates were conducted by employing the horizontal impact experimental apparatus. The finite element simulations were conducted to analyze the dynamic response of PVC foam core sandwich plates based on soil and concrete material model for ice impactor. It was demonstrated that numerical results were in good agreement with experimental results. The deformation modes of the top facesheets were coupling of local indentation with global bending deformation, while the deformation modes of bottom facesheets were overall bending deformation. The permanent deformation of face sheets show that the impact resistance of sandwich plate is better than that of equivalent weight hull plate (EWHP). In addition, based on the actual navigation environment of ship, the effect of impact angle and ice floe shape on dynamic response and energy dissipation are analyzed.     

填充超弹性材料夹层板的抗爆性能研究

夹层板是一种比刚度大、比强度高的结构形式,根据文献将典型加筋板等效为最优夹层板,采用非线性数值方法,对爆炸冲击波作用下方形蜂窝夹层板及填充超弹性材料的方形蜂窝夹层板响应进行数值计算,分析填充超弹性材料夹层对夹层板各部位加速度、速度及位移响应的影响,对比不同爆距下夹层板响应,并分析填充超弹性材料对夹层板吸能的影响。从计算结果可知填充超弹性材料可有效减小爆炸载荷作用下夹层板的响应,减小夹层板面、背板间相对变形。     

填充超弹性材料夹层板的抗爆性能研究

夹层板是一种比刚度大、比强度高的结构形式,根据文献将典型加筋板等效为最优夹层板,采用非线性数值方法,对爆炸冲击波作用下方形蜂窝夹层板及填充超弹性材料的方形蜂窝夹层板响应进行数值计算,分析填充超弹性材料夹层对夹层板各部位加速度、速度及位移响应的影响,对比不同爆距下夹层板响应,并分析填充超弹性材料对夹层板吸能的影响。从计算结果可知填充超弹性材料可有效减小爆炸载荷作用下夹层板的响应,减小夹层板面、背板间相对变形。     

Influence of initial distortion of 3 mm thin superstructure decks on hull girder response for fatigue assessment

This paper investigates the influence of initial distortion of 3 mm thin superstructure decks on hull girder response and fatigue assessment. Part of the traditional superstructure of a prismatic passenger ship is replaced by thin decks with initial distortion amplitude of 0, 1 and 2 times the IACS limit value for thicker plates, i.e. 0, 6 and 12 mm. Both geometrically linear and nonlinear finite element (FE) analysis is used. For reference also traditional superstructure with 5 mm plate thickness is analyzed. Thin straight superstructure decks give 43% of weight reduction and carry approximately 30% less load than corresponding thick straight decks in traditional model. The load that is not carried by thin decks is divided between other traditional decks. The redistribution of forces also happens at the deck level between plates, stiffeners, girders and longitudinal bulkheads. The presence of initial distortion with the shape of one half wave between web frames and stiffeners causes an additional few percent-decrease in forces carried. The results and conclusions are similar for hogging and sagging loading conditions and differences between geometrically linear and nonlinear FE analysis are very small. This means time saving since the panel loading for fatigue assessment can be defined from geometrically linear hull girder response analysis without considering the initial distortions.     

外接平板型金属夹层结构连接构件极限强度分析

激光焊接钢质夹层结构在国外已用于实船,其连接形式是亟待解决的关键问题之一。基于有限元分析软件ANSYS,研究了面内载荷作用下,I型金属夹层结构外接平板型连接构件的失效模式和极限承载能力,以及5种典型初始缺陷的尺寸和连接构件的设计参数对极限载荷的影响规律。结果显示,连接构件较短时,结构失效的主导因素是焊接接头形成了塑性铰;连接构件较长时,主导因素是连接构件失稳。对于各种类型的初始缺陷,随初始缺陷尺寸的增大,极限载荷均降低;连接构件、以及靠近连接构件的夹层面板和夹层腹板的初始缺陷对极限载荷的影响较大。在控制重量的条件下,欲增大极限承载能力,最有效的途径是增大连接构件厚度,并选取合适的连接构件长度。     

Hydrothermally degraded carbon fiber / epoxy plates subjected to underwater explosive loading in a fully submerged environment

An experimental and computational investigation was conducted to evaluate the underwater blast response of fully submerged carbon fiber composite plates after prolonged exposure to saline water. The material was a biaxial carbon fiber/epoxy composite with a [±45°] fiber orientation layup. The plates were placed in a saline water bath with a temperature of 65 °C for 35 and 70 days, which simulates approximately 10 and 20 years of operating conditions in accordance to Fick's law of diffusion coupled with Arrhenius's Equation and a reference ocean temperature of 17 °C. Underwater blast experiments were performed in a 2.1 m diameter pressure vessel. The composite plates were placed in the center of the vessel while fully submerged in water, and an RP-85 explosive was detonated at a standoff distance of 102 mm from the center of the plate. Two cases of fluid hydrostatic gage pressures were investigated: 0 MPa, and 3.45 MPa. Two high speed cameras were utilized for three-dimensional Digital Image Correlation, which provided full-field displacements and velocities of the composite plates during underwater blast loading. A third high speed camera captured the behavior of the explosive gas bubble. Moreover, the pressure fields generated by the explosive detonation and resulting gas bubble were recorded with tourmaline pressure transducers. A water diffusion study was completed which showed that the diffusion of water into the composites reached a point of complete saturation after 35 days of exposure. Quasi-static material characterization tests were performed before and after prolonged exposure to saline water. The properties obtained from quasi-static testing also served as material inputs for the numerical models. The quasi-static test results showed that the tensile modulus E_1,2 does not change with exposure to saline water, whereas the in-plane shear modulus G₁₂ decreases with saline water exposure. During blast loading, for the case of 0 MPa hydrostatic gage pressure, the gas bubble interacts with the composite plate substantially. In such an event, the out of plane displacement increased for saline water exposed plates when compared to virgin structures. For the case of 3.45 MPa hydrostatic gage pressure, the gas bubble does not visibly interact with the composite plate. In this case, the out of plane displacement for specimens exposed to saline water was similar to the virgin specimen. A fully coupled Eulerian–Lagrangian fluid structure interaction simulation was performed by using the DYSMAS code. The numerical simulations showed that the displacement of fully submerged composite plates is driven by the displacement of fluid, as well as the size of the gas bubble formed by the explosive rather than the peak pressure generated by the explosive. The numerical simulations were in agreement with the experimental findings in terms of pressure history and plate deformation.     

Y型激光焊接夹层板抗爆性能分析

金属基折叠式夹层板具有优良的抗冲击性能,Y型激光焊接夹层板(Y-LASCOR)作为其中一种新型结构,需对其抗爆性能进行分析研究.本文基于非线性有限元软件MSC.Dytran开展水下爆炸冲击波载荷作用下Y-LASCOR的抗爆性能研究,并在此基础上研究Y-LASCOR的主要尺寸参数对其抗爆性能的影响.研究结果表明,Y-LASCOR在水下爆炸冲击波载荷作用下,下面板发生膜拉伸变形,夹芯层发生压皱变形,对上面板起到缓冲作用,降低了上面板的损伤变形,改善了结构吸能效率,表现出了优良的抗爆性能;上、下面板厚度t(l),tb和夹芯壁厚tc在一定范围内可以有效改善Y-LASCOR的抗爆性能;夹芯层高度H对结构抗爆性能的影响不大.     

Comparisons of calculations with experiments on the ultimate strength of wide stiffened panels

Five specimens of wide stiffened panel with four stiffeners under axial compression until collapse are studied with a nonlinear finite element analysis and Common Structural Rules to compare with the experimental results. The stiffened panel models have two longitudinal bays to produce reasonable boundary condition at the end of edges. Tension tests have been conducted to obtain the material properties of the steel that are used in the finite element analysis. Three boundary condition configurations are adopted to investigate their influence on the collapse behaviour of the stiffened panels. A displacement transducer was used to measure the initial geometrical imperfections of the stiffened plates. The collapse behaviour of the stiffened panels is analysed in finite element analysis with the measured initial imperfections and with nominal imperfections. An equivalent initial imperfection is validated for the ultimate strength of stiffened panel under compressive load until collapse for the panels under consideration. With the same imperfection amplitude, the shape of the column-type initial deflection of stiffeners affects significantly the collapse shape, but only slightly the ultimate strength and the mode of collapse of the stiffened panels. The 1/2 + 1 + 1/2 bays model with restrained boundary condition BC3 gives an adequate FE modelling and is possible to be fabricated in experiment.     

垂直围壁对爆炸载荷作用下固支方板动力响应特性影响分析

采用数值仿真方法研究了垂直围壁对爆炸载荷作用下固支方板动力响应特性的影响.提出包含角的概念来反映围壁高度的变化.采用控制变量法对264组具有垂直围壁方板模型的动力响应进行了计算,分析了包含角、炸药质量、板厚、相对爆距等变量对方板所受爆炸冲量和中心点位移的影响.结果表明,垂直围壁会增大目标方板所受爆炸冲量,当围壁高度增大到一定程度后,爆炸冲量趋于一定值;无量纲冲量-I仅与包含角和相对爆距有关,并提出了相应经验公式.文中同时提出了一个考虑垂直围壁影响的中心点挠厚比计算公式,并对其适用范围进行了讨论.     

壳单元和实体单元模拟爆炸荷载作用钢板动力响应的差异性比较

以舰船舱室钢板为研究对象,利用动力分析有限元程序Ls-dyan,分别采用壳单元和实体单元2种建模方式对爆炸荷载作用下钢板的动力响应进行数值模拟研究.对比钢板的应力分布云图、中线上各点最大位移曲线图,发现2种方法计算结果与试验值大致吻合,采用壳单元建模在保证计算结果准确性的前提下可以大大提高计算效率.如何正确地选择单元进行分析是数值模拟很重要的一个环节,通过对壳单元和实体单元计算结果的初步对比,为舰船舱室数值模拟研究如何选取单元提供参考.     

舱室内爆载荷作用下夹层板优化设计研究

舱室内战斗部爆炸产生的冲击波是舱室结构板架承受的主要载荷之一,舱室内爆冲击波在舱室内部将发生多次反射,并在舱室内部形成持续时间较长的准静态压力,在此过程中舱室板架承受多次冲击波反射载荷。本文以舱室典型加筋板为对象进行夹层板概念设计,选取面板厚度、背板厚度、夹芯壁厚及夹芯间距4个参数作为试验参数,以抗爆综合评价指标最小为目标,采用正交试验优化设计方法得到该加筋板结构在舱室内爆冲击波载荷作用下最优抗爆性能的夹层板结构,并对比最优夹层板与普通加筋板在舱室内爆载荷作用下的响应特征。研究表明,经过优化设计后的夹层板具有更好抵抗冲击波载荷的能力,正交试验设计能较好适用于夹层板结构优化设计。     

具有裂纹缺陷的加筋板的剩余拉伸强度分析

对具有裂纹缺陷的加筋板的剩余强度进行了数值分析.考虑了加筋板上的三种缺陷形式,即板和筋上的垂直裂纹,板和筋上的倾斜裂纹以及板上的裂纹和筋上的圆孔.对板和筋上的相对裂纹长度、材料属性、板和筋的厚度、裂纹开裂角度以及圆孔的直径等影响参数进行了分析.同时,将无加筋板剩余强度的经验公式推广到加筋板,并验证了公式的有效性.     

Laser-welded web-core sandwich plates under patch loading

This paper presents an approach to the structural analysis of patch-loaded, laser-welded web-core sandwich plates. This approach is especially suitable for the concept design phase of ship structures. The method consists of two parts; the global bending response is evaluated using sandwich plate theory and the local response of the patch-loaded face plate is determined with the help of basic plate theory. Both analyses utilise analytical and numerical methods and include the effect of the rotation stiffness of the laser-welded T-joint between the face and web plate. Combining the results of these two analyses gives the total response of the web-core sandwich plate. The results of the proposed approach are compared to those given by 3D solid and shell element FE analyses and the agreement of deflections and normal stresses is found to be good. The sensitivity of the response to patch-load size, T-joint rotation stiffness, and plate aspect ratio is studied. The main benefits of the proposed approach are its short analysis time and the good accuracy of deflections and stresses. This considered advantageous when applied to the design of large ship structures such as hoistable car decks.     

芯板可压缩的夹层加筋板固有频率分析

推导了一种考虑芯板垂向压缩变形影响的双向加筋的约束阻尼夹层板有限元单元.其中,夹层板面遵循Mindlin一阶剪切变形理论的假定;芯板采用基于厚板理论的非线性位移模式, 各向位移沿板厚成抛物线分布, 并考虑了芯板的横向压缩变形;加强筋采用Timoshenko梁模型,考虑了其剪切变形的影响.根据层间位移连续和板、梁位移连续假设,将芯板和加强筋的位移用上下面板位移表示,推导了相应的位移应变关系, 继而根据Hamilton原理建立了控制方程.数值计算结果表明约束阻尼夹层加筋板有限元单元的推导是正确的;在约束阻尼夹层加筋板的固有频率研究中,考虑夹层板芯层的垂向压缩变形的影响是必要的.还讨论了芯板和加强筋的各个参数对板固有频率的影响.     

等效刚度法计算波纹夹层板弯曲变形与应力

[目的]为探索波纹夹层板弯曲问题的计算方法,求解波纹夹层板的弯曲变形与应力,提出一种等效刚度法。[方法]将波纹夹层板中间芯层等效成正交异性体,应用卡氏定理求解芯层的等效弹性模量,最后应用层合板理论计算夹层板的整体刚度。依据夹层板的整体刚度,求解正交异性板的弯曲平衡方程,计算出夹层板的弯曲变形分布;通过求出的变形,应用虎克定律,即可推导夹层板的弯曲应力分布。[结果]通过算例验证,与文献[7]的方法相比,本文方法计算的刚度误差为-6.98%;与有限元法相比,本文方法计算的夹层板变形最大误差为-2.01%,应力最大误差为3.63%。[结论]这种分层累加计算整体刚度的方法,不仅可避免完全直接采用文献[7]的方法计算刚度时的复杂繁琐推导,而且用于弯曲计算还可获得较好的精度。     

夹层板在舰船舷侧防护结构中的应用

水面舰船抗水下爆炸的性能是舰船生命力的重要方面,深受各国海军重视.以某型水面舰船为研究对象,基于夹层板进行舷侧结构设计;选取典型工况,采用三舱段模型技术,使用MSC.Dytran对夹层板舷侧结构在水下爆炸冲击波载荷作用下的动态响应进行仿真计算.比较分析了流-固耦合力、结构变形、速度、加速度、吸能等重要力学性能.结果表明夹层板应用于舰船舷侧结构使得结构的变形、位移减小,结构塑性吸能增加,显著改善了结构的冲击环境.夹层板是一种防护性能优良的结构形式,吸能效率较高,还减小了冲击波压力及冲量的吸收及传递,对减小舰船其它部位结构的损伤防护起到重要作用.     

金属夹层结构的舰船应用研究综述

金属夹层结构作为一种未来工程应用的新型结构,在舰船领域有着广阔的应用前景。立足于水面舰船背景,从金属夹层结构的基本类型、在舰船中的应用、抗爆抗冲击性能分析以及目前存在的技术难点等几个方面进行综述,发现在此领域有4个方面的问题亟待解决：应系统地开展舰用金属夹层结构的相关基础研究;需尽快系统地开展关于波纹夹芯板的相关研究;在相关基础研究的基础上,开展设计技术研究;开展大量试验研究工作,降低设计风险。