加强轴承检测，防止机车故障

总结了几年来使用JSC-206轴承检测仪的经验、教训及取得的成效，对保证机车运行安全起到了很大的作用。     

弹性接触问题的位移-力法有限元解法研究

本文根据接触状态下的有限元基本方程,通过对定解条件、约束条件的分析应用,得出了仅与接触点有关的定解方程。 运用所编制的电算程序对某柴油机副连杆销及孔在最大载荷下的失圆变形进行了计算。通过采用空心及实心销两种简化模型计算得出了实际副连杆销的失圆变形范围。     

温度和麻醉对神经几种兴奋性指标的影响——兼论何者可以正确反映兴奋性

在蟾蜍坐骨神经-腓神经观察了温度和麻醉对几种兴奋性指标的影响。结果表明,标准电量(a)随兴奋性的变化而有规律地变化。兴奋性愈高。a值愈小。而Weiss式中的b、基强度(Rh)、时值(Chr)及强度—时间曲线均不能正确反映兴奋性。细胞膜时间常数(RC)与兴奋性的变化无规律性联系。结论,a是兴奋性的可靠定量指标。     

A study of the environmental impacts of intelligent automated vehicle control at intersections via V2V and V2I communications

This article presents a novel intersection traffic management system for automated vehicles and quantifies its impact on fuel consumption and greenhouse gas emissions of CO₂ relative to traditional traffic signal and roundabout intersection control. The developed intelligent traffic management (ITM) techniques, which are based on a spatiotemporal reservation scheme, ensure that vehicles proceed through the intersection without colliding with other vehicles while at the same time reducing the intersection delay and environmental impacts. Specifically, the spatiotemporal reservation scheme provides each vehicle a collision-free path that is decomposed into a speed profile along with navigational instructions. The integration of the developed microscopic traffic simulator with instantaneous emission model, provides improved assessments of the environmental impact of traffic control strategies at intersections. The simulator architecture integrates several ITM algorithms, vehicle sensors, V2V/V2I communications, and emission and fuel consumption models. Each vehicle is modeled by an agent and each agent provides information depending on the specific vehicle sensors. The ITM system is supported by V2V and V2I communications, allowing the exchange of information among vehicles and infrastructure. The data include the estimated vehicle position and speed. Compared with traditional traffic management techniques, the simulation results prove that the proposed ITM system reduces CO₂ emissions significantly. The research also shows that these reductions are more significant when the traffic flow increases.     

Strategic groups in Taiwanese liner shipping

Liner shipping is normally viewed as being oligopolistic in nature with firms competing on the basis of service offered. Since shipping services are easily copied by competitors, if shipping firms want to gain a competitive advantage, it is essential to identify the competitors' strategies. This paper uses the analytical concepts of strategic groups theory to explore the strategic differences in the Taiwanese (the Republic of China, ROC) shipping industry. Cluster analysis is used to classify shipping companies, shipping agencies and ocean freight forwarders into four strategic groups on the basis of the key strategic factors obtained from the factor analysis. The results of multivariate analysis of variance (MANOVA), analysis of variance (ANOVA) and the Scheffe test showed that strategies among the strategic groups are significantly different.     

穿浪双体船兴波阻力研究

对穿浪双体船（WavePiereingCatamaran,简称WPC）兴波阻力理论计算方法进行了研究,在此基础上对一艘穿浪双体船模型的兴波阻力进行了理论计算,并将理论计算结果与模型试验结果、25°系列阻力图谱计算结果进行比较,探讨了片体修长系数、片体间距对WPC兴波阻力影响的规律。     

汕头国际集装箱码头道路堆场地基处理监测及效果检验

结合汕头国际集装箱码头道路堆场地基处理监测,介绍在堆载预压的过程中采用各种测试手段开展全方位、全过程的监测工作,检验堆载预压法改善和加固软土地基的效果和能力。     

基于PRO/E船用控制台紧凑节能型结构设计

文章探讨基于PRO/E板金SHEET MEATE模块,建立船用动力定位控制台箱体结构紧凑节能模型,通过钣金零件剥离成型进行三维局部圆弧设计,解决复杂的箱体零件展开放样计算、拼装角度计算、制造工艺等难题。利用现代数控MCAD制造的特点,实现动力定位台结构轻巧、外形美观、功能性强的效果,起到节省材料,减少占用船舱空间和运行能耗,增加船舶灵活性的作用。     

斗轮堆取料机的发展趋势

斗轮堆取料机普遍采用PLC和变频器调速、液压驱动、网络控制等技术。其生产能力显著提升,造型得到了改进,产品向大型化、无人化、多样化、环保和配套国际化的方向发展。国际市场对斗轮堆取料机的需求大。     

双块式无砟轨道裂缝形式及控制标准研究

首先对双块式无砟轨道结构设计原理和裂缝控制方式进行研究,然后对双块式无砟轨道裂缝形式进行分析,并进一步分析了其裂缝产生机理.在此基础上,对德国DIN1045-1标准、欧洲混凝土委员会、日本土木学会与建筑学会、美国混凝土协会(ACI)及我国混凝土结构设计规范和连续配筋混凝土路面工程中混凝土裂缝控制标准进行分析.我国幅员辽...