评价重型车用柴油机排放的13工况测试循环和欧洲稳态测试循环的对比

基于同一组增压中冷重型车用柴油机排放试验数据，采用拟合插值的方法得到了13工况循环和欧洲稳态循环两种不同测试循环的比排放数据。利用分担率和加权比排放数据分析了上述两种测试循环的不同点。指出了在实行欧Ⅲ排放法规后对车用柴油机进行排放优化的策略。     

风积沙填筑路基施工质量控制

如何利用风积沙填筑路堤(含填高大于10m的路堤)，既达到设计要求．又保证路基稳定，并满足各项技术指标，是工程建设中的一个难题。目前国内尚无成熟的沙漠区路基施工技术规范、施工工艺和方法。文章结合工程实际，阐述了风积沙作为路基填料，其施工质量控制办法。     

广西高速公路生态环境保护对策研究

文章针对广西高速公路生态环境现状,分析当前高速公路环境保护工作中存在的问题,从生态学角度提出了高速公路沿线生态环境建设和保护对策。     

一种用于高压脉冲电容实验平台的充电电源模块设计

本文是对一种用于高压脉冲电容实验平台的充电电源模块的设计进行论述。主要介绍该充电模块在高压脉冲电容实验平台中的功能、作用、技术要求。论述了充电模块中交流变换单元的电路,对高频变换单元的功能实现进行了阐述。     

基于LiDAR点云的船载砂石体积自动测算系统

针对现有船舶运输砂石体积计算主要依赖人工方式称重和纸质运单流转、精度不高且效率很低的难题，采用基于八叉树的点云精简和聚类分析进行复杂环境下船舶点云的自动识别和提取；采用基于改进SK-4PCS （semantic-keypoint-based 4-points congruent sets）的粗配准和基于Point-to-Plane ICP （iterative closest point）的精配准进行空载和满载两期点云由粗到精的高效配准，设计实现了一种利用LiDAR （light detection and ranging）点云数据进行船载砂石自动测算的系统. 采集了江西南昌赣江运砂船数据进行实验验证，从扫描到出结果一艘船的砂石体积自动测算时间少于2 min，同船多次测算结果最大相对误差小于1.00%，砂石体积与实际真值相比的最大误差小于2.00%，满足实际业务需求.      

Two degree of freedom flow-induced vibration of cylindrical structures in marine environments: frequency ratio effects

The flow-induced vibration of a cylindrical structure is a very common problem in marine environments such as undersea pipelines, offshore risers, and cables. In this study, the vortex-induced vibration (VIV) of an elastically mounted cylinder at a low Reynolds number is simulated by a transient coupled fluid–structure interaction numerical model. Considering VIV with low damping ratio, the response, hydrodynamic forces, and vortex shedding modes of the cylinder is systematically analyzed and summed up the universal rule under different frequency ratios. On the basis of the analysis, we find that the frequency ratio α is a very important parameter. It decides the locked-in, beat, and phase-switch phenomena of the cylinder, meanwhile, it also influence the vortex mode of the cylinder. The trajectory of the two degrees of freedom (2 DOF) case at different natural frequency ratios is discussed, with most trajectories having a “figure of 8” shape and a few having a “crescent” shape. A fast Fourier transformation technique is used to obtain the frequency characteristics of the vibration of the cylindrical structure. Using the 2 DOF cylinder model in place of the 1 DOF model presents several advantages in simulating the nonlinear characteristics of cylindrical structures, including the capacity to model the crosswise vibration generated by in-line vibration.     

Optimal concession contracts for landlord port authorities with different pursuing goals

This paper investigates how landlord port authorities should offer concession contracts to their terminal operators under two different goals, by building a two-stage game for each goal. If maximizing the weighted sum of fee revenues and throughout benefits is port authorities’ goal, then the optimal concession contract can be any of the two-part tariff, the unit-fee, and the fixed-fee contracts. Accordingly, our special cases include previous works assuming that port authorities maximize either fee revenues or throughput benefits. By contrast, if maximizing the social welfare is the goal, then we find that subsidizing terminal operators, instead of charging them, is port authorities’ best choice. This result is not yet discovered in the literature.     

无轴轮缘推进器电机与水力部件耦合优化设计研究

针对目前无轴推进器电机与水力部件设计时多未考虑两者耦合的问题,本文提出两者耦合的优化设计方法.采用多参数非线性优化方法,基于电机和导管螺旋桨设计理论公式,并考虑无轴推进器电机转子的直径等同于螺旋桨内径加上叶梢间隙,以及螺旋桨输出转矩加上间隙的摩擦转矩值作为电机输入转矩的关系,建立了一种新型优化设计模型,通过优化方法进行迭代分析,利用5.5 kW无轴推进器进行方法验证.研究结果表明,所提出的优化方法有效地考虑了无轴推进器电机与水力部件的耦合关系,可对推进器效率进行综合优化.     

一种基于卫星导航的列车初始定位方法研究

在西北环境恶劣地区,线路区间往往较少设置实体应答器,列车在区间重启时需要长距离低速运行.经过实体应答器后才能确定列车位置。针对该问题.本文提出一种基于卫星导航系统和车载电子地图的列车初始定位方法。该方法利用轨道约束算法和概率学方法,设计满足铁路安全标准要求的列车初始定位方法。     

基于分级节点的高速铁路货运动车组开行研究

“八纵八横”高速铁路网货运节点可以利用聚类分析法,依据货运总量、GDP、人口、社会消费品零售总额、快递业务量、线路连接数、城市类别和节点类别等指标划分为4个等级。基于灰色系统预测模型,预测2025年高速铁路货运量,构建数学模型计算保本货运量。依据节点划分、货运量预测、保本货运量结果,计算各等级节点中盈利OD所占的比例,结合日均OD量,分析各等级节点间开办高速铁路货运的可行性。研究表明,在一级节点之间可以开行高速铁路货运动车组专列,在二级节点之间可以开行客货联挂动车组,三、四级节点可以采用捎带运输的方式。