Continuum theory for pedestrian traffic flow: Local route choice modelling and its implications

This contribution puts forward a novel multi-class continuum model that captures some of the key dynamic features of pedestrian flows. It considers route choice behaviour on both the strategic (pre-trip) and tactical (en-route) level. To achieve this, we put forward a class-specific equilibrium direction relation of the pedestrians, which is governed by two parts: one part describing the global route choice, which is pre-determined based on the expectations of the pedestrians, and one part describing the local route choice, which is a density-gradient dependent term that reflects local adaptations based on prevailing flow conditions.Including the local route choice term in the multi-class model causes first of all dispersion of the flow: pedestrians will move away from high density areas in order to reduce their overall walking costs. Second of all, for the crossing flow and bi-directional flow cases, local route choice causes well known self-organised patterns to emerge (i.e. diagonal stripes and bi-directional lanes). We study under which demand conditions self-organisation occurs and fails, as well as what the impact is of the choices of the different model parameters. In particular, the differences in the weights reflecting the impact of the own and the other classes appear to have a very strong impact on the self-organisation process.     

基于Midas Civil的简易车桥耦合振动分析

文章以某40m预应力混凝土简支T梁为例，利用单轴车桥耦合振动数值模型及基于MidasCivil的简易车桥耦合振动模型对移动车辆荷载作用下的T梁结构动力响应情况进行计算分析。结果表明，基于MidasCivil的简易车桥耦合振动模型与数值模型的结构挠度峰值计算结果相差不大，可用于简单的车桥耦合振动分析。     

U型桥台开裂原因分析及加固方案探讨

文章结合高速公路U型桥台开裂的典型工程实例，分析了U型桥台裂缝产生的原因，提出了相应的加固处治方案，并阐述了加固方案的实施要点与处治效果。     

基于BP人工神经网络的滑坡预测分析

文章以汶川地震引发的滑坡为研究对象,以震中距、地震烈度、坡度、前缘高程、坡高和岩性等影响坡体稳定性的因素为切入点,利用BP人工神经网络对实际坡体的稳定性进行了预测分析。结果表明,BP人工神经网络方法能有效预测坡体的稳定情况。     

Superpave-13沥青混合料高温稳定性分析

文章结合天水过境高速公路路面实体工程,对不同孔隙率条件下的Super-pave-13高性能沥青混合料进行了车辙试验及SPT试验分析。结果表明,要保证Superpave-13沥青混合料具有较好的高温稳定性,其压实孔隙率应控制在4%～6.5%范围内。     

The load-dependent vehicle routing problem and its pick-up and delivery extension

The present paper examines a Vehicle Routing Problem (VRP) of major practical importance which is referred to as the Load-Dependent VRP (LDVRP). LDVRP is applicable for transportation activities where the weight of the transported cargo accounts for a significant part of the vehicle gross weight. Contrary to the basic VRP which calls for the minimization of the distance travelled, the LDVRP objective is aimed at minimizing the total product of the distance travelled and the gross weight carried along this distance. Thus, it is capable of producing sensible routing plans which take into account the variation of the cargo weight along the vehicle trips. The LDVRP objective is closely related to the total energy requirements of the vehicle fleet, making it a credible alternative when the environmental aspects of transportation activities are examined and optimized. A novel LDVRP extension which considers simultaneous pick-up and delivery service is introduced, formulated and solved for the first time. To deal with large-scale instances of the examined problems, we propose a local-search algorithm. Towards an efficient implementation, the local-search algorithm employs a computational scheme which calculates the complex weighted-distance objective changes in constant time. Solution results are presented for both problems on a variety of well-known test cases demonstrating the effectiveness of the proposed solution approach. The structure of the obtained LDVRP and VRP solutions is compared in pursuit of interesting conclusions on the relative suitability of the two routing models, when the decision maker must deal with the weighted distance objective. In addition, results of a branch-and-cut procedure for small-scale instances of the LDVRP with simultaneous pick-ups and deliveries are reported. Finally, extensive computational experiments have been performed to explore the managerial implications of three key problem characteristics, namely the deviation of customer demands, the cargo to tare weight ratio, as well as the size of the available vehicle fleet.     

Including congestion effects in urban road traffic CO2 emissions modelling: Do Local Government Authorities have the right options?

Tailpipe emissions from vehicles on urban road networks have damaging impacts, with the problem exacerbated by the common occurrence of congestion. This article focuses on carbon dioxide because it is the largest constituent of road traffic greenhouse gas emissions. Local Government Authorities (LGAs) are typically responsible for facilitating mitigation of these emissions, and critical to this task is the ability to assess the impact of transport interventions on road traffic emissions for a whole network.This article presents a contemporary review of literature concerning road traffic data and its use by LGAs in emissions models (EMs). Emphasis on the practicalities of using data readily available to LGAs to estimate network level emissions and inform effective policy is a relatively new research area, and this article summarises achievements so far. Results of the literature review indicate that readily available data are aggregated at traffic level rather than disaggregated at individual vehicle level. Hence, a hypothesis is put forward that optimal EM complexity is one using traffic variables as inputs, allowing LGAs to capture the influence of congestion whilst avoiding the complexity of detailed EMs that estimate emissions at vehicle level.Existing methodologies for estimating network emissions based on traffic variables typically have limitations. Conclusions are that LGAs do not necessarily have the right options, and that more research in this domain is required, both to quantify accuracy and to further develop EMs that explicitly include congestion, whilst remaining within LGA resource constraints.     

500米长轨营业线火车市场运费与概预算编制办法计算运费对比分析

随着《铁路基本建设项目投资管理办法》(铁总计统〔2017〕179号)及《关于铁路建设项目清理概算工作的通知》(发改投资电〔2019〕1号)文的出台,标志着铁路建设项目概算清理工作,将逐步交由建设单位按照不突破初步设计批复金额进行处理,因此初步设计阶段如何确保招标预算金额的准确性,体现的越来越为重要,本文通过对500米长轨营业线火车市场运费与编制办法计算运费的分析,量化两者费用存在的差异,列明差异原因,并提出相关建议。     

Local joint flexibility of tubular X-joints stiffened with external ring or external plates

In the present paper, the Local Joint Flexibility (LJF) of the ring-stiffened X-joints and plate-stiffened X-joints under compressive load is investigated. In the first phase, a finite element (FE) model was generated and verified with the results of available experimental tests and equations. In the next phase, a set number of 234 FE models were created to evaluate the role of the external ring size (β_r and τ_r), the external plate size (β_p and τ_p), and the connection geometry (γ, τ, and β) on the LJF factor (f_LJF). In these FE models, the weld connecting the chord and brace members was generated. The results indicated that the f_LJF of a plate stiffened joint can be down to 76% of the f_LJF of the corresponding un-stiffened joint. Also, the effect of the ring size on the f_LJF was more than the effect of the plate size on the f_LJF, because of the stiffener position. Despite the notable effect of the ring and the plate on the f_LJF, there is not any study or formula on tubular connections stiffened with ring or plate. Therefore, the FE results were used to propose two parametric formulas for determining the f_LJF in X-joints with external ring or external plate under brace compressive load. Moreover, the derived formulas were checked based on the UK DoE acceptance criteria.     

汽油发动机的尾气分析与应用

汽油发动机尾气中主要成份为HC、CO、CO2、NOX、O2等。本文分析了尾气的形成、特征和超标排放原因,以及尾气检测原理和标准,通过几例本人在工作中的实例,说明尾气检测在维修实践中所起到的重要作用,可供维修单位检测参考。