城市复杂条件下过江通道桥隧方案比选研究——以宁波市四明路跨奉化江通道为例

随着城市化进程的加快,城市过江通道规划的数量越来越多。在城市建成区内,过江通道的建设条件越来越复杂,通常要处理好过江通道与交通路网、地块开发、地铁建设、河道通航等重要制约因素的之间的关系。过江通道在桥隧形式上各有利弊,以宁波市四明路跨奉化江通道为例,分别研究了桥梁、隧道过江方案的总体布置,桥隧方案与地铁的关系,通过对桥隧方案各自的优缺点进行对比分析,得出了采用桥梁方式过江为最优方案,为类似过江通道工程提供借鉴。     

建筑物受深基坑开挖影响的显式差分分析

在基坑开挖过程中，临近重要建筑物的保护是一个重要的研究课题，通过天津地铁营口道车站深基坑开挖的模拟分析可以看出，地表沉降、墙体变位、基坑隆起三者之间存在着明显的关系，临近基坑建筑物沉降变形与其基坑的接近度有明显关系，施工过程中应综合考虑技术可行性、安全、环保、质量、工期、效益等因素采取保护措施。     

大断面地铁车站隧道软弱围岩渐进破坏规律模型试验研究

以贵阳市地铁2号线阳明祠车站为背景,采用室内模型试验模拟大断面地铁车站施工过程中隧道塌方破坏过程,明确施工期间大断面隧道塌方破坏过程机制,对比分析围岩和路面的变形。结果表明:通过围岩重力作用模拟隧道施工过程中塌方过程,与实际塌方过程基本吻合,弥补了常规加载破坏的不足;围岩渐进破坏过程表现为裂隙出现-裂隙发展-裂隙贯通-围岩塌方,支护渐进破坏过程表现为变形缓慢增加-变形快速增加-裂缝快速发展-支护破坏;围岩渐进破坏与支护渐进破坏相互作用,共同发展;在实际施工过程中,当支护变形大幅增加时,应增加支护强度,同时还应及时注浆、打设长锚杆,以减缓围岩裂隙发展,阻断围岩渐进破坏过程。     

高架快速路上跨宝鸡东编组站方案比选

宝鸡市斗中路高架快速路,跨越宝鸡东编组站的10股轨道线和铁路专用线,同时桥下的城市主干路以框架桥的形式下穿宝鸡东编组站。桥位处需保留现状的地面交通、铁路框架桥和周围的高层建筑,桥址处空间局促,建设条件复杂,导致桥梁墩位布置困难。桥梁的布置方案与施工方案相互影响和制约。上跨方案是控制整条快速路的关键节点。综合考虑主墩的合理位置、恰当的孔跨布置和适宜的施工方案,对矮塔斜拉桥、刚构桥等方案进行详细的对比分析,确定采用(97+97)m的转体刚构桥方案。该方案的安全性和经济性均较优。该桥方案的研究过程和方法,为类似的复杂城市环境下,建设高架桥梁跨越铁路编组站提供参考和借鉴。     

兰州地铁地温分布特性及其演化规律

以兰州地铁所在地区为研究对象,实测地铁隧道开挖前的地温(简称为初始地温),根据实测数据,提出地铁初始地温预测模型公式。采用非稳态传热的数值模型,分析运营条件下地铁隧道围岩温度的演化规律。结果表明:兰州地铁初始地温随环境气温和埋深的变化而变化;年变温层位于自地表至埋深12m处;年恒温层位于埋深12m及其以下,温度为15℃左右;年变温层中,1年内初始地温变化规律与环境气温变化规律相似,近似呈正弦曲线状分布,但存在相位滞后的现象;1年中初始地温的振幅随埋深的增大呈指数下降趋势。在隧道内空气与围岩之间热交换中,兰州地铁隧道围岩的温度及其梯度、热透厚度(未达到极限时)均与隧道内环境温度、热交换时间成正相关关系,但与距隧道内壁的距离成负相关关系。     

高精度陀螺全站仪在长大铁路隧道CPⅡ平面控制网分段建网测量中的应用

为了确保隧道贯通前CPⅡ分段建网的精度,保障隧道的顺利施工,以格库铁路阿尔金山隧道为工程背景,采用高精度陀螺全站仪对洞内CPⅡ平面控制网加测多条陀螺边,并提出了陀螺定向精度观测精度内检核、多条陀螺边定向复核的方法,对陀螺定向边位置的选择、陀螺方位角观测中误差、陀螺方位角观测值的应用区间进行探讨。应用高精度陀螺定向成果对比分析洞内CPⅡ分段控制网成果,从理论上探讨了加测陀螺边对CPⅡ控制网贯通预计精度的影响,解决了隧道贯通前CPⅡ平面控制网精度无法验证的问题,确保了CPⅡ分段建网的精度,总结出一套高精度陀螺全站仪在长大铁路隧道CPⅡ平面控制网分段建网测量中的应用方法,其中包括陀螺定向边间距约2 km、陀螺定向边采用对向观测、每测站数不小于4测回且观测方向平均测角中误差应小于仪器精度(3.6″)、依据陀螺观测计算方位角与导线推算方位角较差值并将成果应用划为三个应用区间、依据陀螺定向观测精度变换权重降低贯通预计值、优化约束平差计算方案等。     

Fast-charging station choice behavior among battery electric vehicle users

This study explores how battery electric vehicle users choose where to fast-charge their vehicles from a set of charging stations, as well as the distance by which they are generally willing to detour for fast-charging. The focus is on fast-charging events during trips that include just one fast-charge between origin and destination in Kanagawa Prefecture, Japan. Mixed logit models with and without a threshold effect for detour distance are applied to panel data extracted from a two-year field trial on battery electric vehicle usage in Japan. Findings from the mixed logit model with threshold show that private users are generally willing to detour up to about 1750 m on working days and 750 m on non-working days, while the distance is 500 m for commercial users on both working and non-working days. Users in general prefer to charge at stations requiring a shorter detour and use chargers located at gas stations, and are significantly affected by the remaining charge. Commercial users prefer to charge at stations encountered earlier along their paths, while only private users traveling on working days show such preference and they turn to prefer the stations encountered later when choosing a station in peak hours. Only private users traveling on working days show a strong preference for free charging. Commercial users tend to pay for charging at a station within 500 m detour distance. The fast charging station choice behavior is heterogeneous among users. These findings provide a basis for early planning of a public fast charging infrastructure.     

A cost-competitiveness analysis of charging infrastructure for electric bus operations

This study investigates the cost competitiveness of different types of charging infrastructure, including charging stations, charging lanes (via charging-while-driving technologies) and battery swapping stations, in support of an electric public transit system. To this end, we first establish mathematical models to investigate the optimal deployment of various charging facilities along the transit line and determine the optimal size of the electric bus fleet, as well as their batteries, to minimize total infrastructure and fleet costs while guaranteeing service frequency and satisfying the charging needs of the transit system. We then conduct an empirical analysis utilizing available real-world data. The results suggest that: (1) the service frequency, circulation length, and operating speed of a transit system may have a great impact on the cost competitiveness of different charging infrastructure; (2) charging lanes enabled by currently available inductive wireless charging technology are cost competitive for most of the existing bus rapid transit corridors; (3) swapping stations can yield a lower total cost than charging lanes and charging stations for transit systems with high operating speed and low service frequency; (4) charging stations are cost competitive only for transit systems with very low service frequency and short circulation; and (5) the key to making charging lanes more competitive for transit systems with low service frequency and high operating speed is to reduce their unit-length construction cost or enhance their charging power.     

青岛地铁线网无线统一调度系统互联互通实施方案

简要阐述青岛地铁线网无线统一调度系统互联互通实施方案的系统架构、核心设备功能、纵向统一调度方案、横向集群业务互联互通方案以及相应的业务流程等。该方案实现了青岛地铁不同品牌TETRA系统的线网纵向统一调度和线网横向集群业务的互联互通功能,解决了青岛地铁线路多品牌系统跨线运营的问题。