ECDIS强制配备的港口国监督

文中依据国际公约的有关要求和PSC检查实务,详细阐述了ECDIS的港口国监督检查流程及相应的缺陷处理建议。     

基于隧道断面面积变化的围岩稳定性判别

随着新奥法施工技术的广泛应用,围岩的动态变形越来越受到人们的关注。目前,我国主要是通过监测典型节点的位移来判断围岩变形的稳定性。典型节点的变形并不能代表整个围岩断面的变形状况,该方法存在一定的缺陷,因此提出采用隧道断面面积变化的方法来评价围岩变形的稳定性。采用突变理论数学方法计算Ⅳ级和Ⅴ级围岩在不同埋深条件下断面面积的变化值,得出面积变化的极限值,最终以此极限值作为判定围岩变形稳定的判据。     

谈航行数据记录仪的港口国监督检查

文中在分析航行数据记录仪主要组成及功能的基础上,以IMO海上安全委员会通过的航行数据记录仪的相关决议为检查依据,结合港口国监督检查实践经验总结出航行数据记录仪检查要点及方法,结合检查实例进行阐述,以期能给同行提供一些有益的参考。     

ZD6-E/J/J型双动道岔控制电路故障分析及改进

针对现场某站ZD6-E＋J＋J三点牵引双动道岔挤岔试验时,第5机与第6机存在随机不动作,室内控制台失去表示的现象,通过排查故障原因、分析试验结果,逐步提出优化方案,将故障排除,顺利开通运行.     

Ant Colony Routing algorithm for freeway networks

Dynamic traffic routing refers to the process of (re)directing vehicles at junctions in a traffic network according to the evolving traffic conditions. The traffic management center can determine desired routes for drivers in order to optimize the performance of the traffic network by dynamic traffic routing. However, a traffic network may have thousands of links and nodes, resulting in a large-scale and computationally complex non-linear, non-convex optimization problem. To solve this problem, Ant Colony Optimization (ACO) is chosen as the optimization method in this paper because of its powerful optimization heuristic for combinatorial optimization problems. ACO is implemented online to determine the control signal – i.e., the splitting rates at each node. However, using standard ACO for traffic routing is characterized by four main disadvantages: 1. traffic flows for different origins and destinations cannot be distinguished; 2. all ants may converge to one route, causing congestion; 3. constraints cannot be taken into account; and 4. neither can dynamic link costs. These problems are addressed by adopting a novel ACO algorithm with stench pheromone and with colored ants, called Ant Colony Routing (ACR). Using the stench pheromone, the ACR algorithm can distribute the vehicles over the traffic network with less or no traffic congestion, as well as reduce the number of vehicles near some sensitive zones, such as hospitals and schools. With colored ants, the traffic flows for multiple origins and destinations can be represented. The proposed approach is also implemented in a simulation-based case study in the Walcheren area, the Netherlands, illustrating the effectiveness of the approach.     

浅谈桥梁混凝土裂缝的防治

分析混凝土裂缝产生的原因及预防措施,加强对混凝土施工控制,避免混凝土出现裂缝.     

散货船国际安全措施

本文简要分析了九十年代以来散货船海损事故及原因，回顾了几年来ＩＭＯ和Ｉ－ＡＣＳ寻求散货船安全措施的历程和合作，并提出还需解决的遗留问题及有关建议。     

A passenger car driver model for higher lateral accelerations

Due to increasing demands for time and cost efficient vehicle and driver assistant systems development, numerical simulation of closed-loop manoeuvres becomes increasingly important. Thus, the driver has to be considered in the modelling. On the basis of a two-layer approach to model a driver's steering behaviour, the field of application is extended to higher lateral accelerations in this study. An analytical method to determine the driver parameters is presented, which is based on the two-wheel vehicle model. The simulation results are determined using a full vehicle model including all essential nonlinearities. Standard manoeuvres in the nonlinear range of vehicle handling behaviour are performed. A cornering manoeuvre is chosen to show the characteristics of the proposed driver model.     

摩托车用数字式CDI点火器

根据点火储能元件的不同，点火器主要有电容充放电点火（ＣＤＩ）和晶体管点火（ＴＣＩ）两种类型。介绍了摩托车用数字式ＣＤＩ的工作原理及软、硬件结构。其突出的优点在于能够根据预先给定的进角曲线对发动机点火提前角进行精确控制，从而使发动机在各种工作转速范围内均能够达到最佳性能。     

船用捷联系统中DTG脉冲再平衡回路的全解耦实现

从理论上分析了ＤＴＧ的控制解耦与输出解耦具有不同同时的物理实现性。探讨了采用物理方法实现控制解耦，而用计算机对反馈电流进行处理实现输出解耦的可能性。通过理论分析，提出一个经校正的输出解耦阵，并经计算机仿真分析与实验验证表明，此解耦阵完全可以实现实时性很好的计算机全解耦。