深圳市“5.24”暴雨洪水灾后的反思

1998年5月24日，深圳市暴雨成灾，经济损失很大。本文总结和分析了暴雨洪水的特性及其成灾的原因，提出防洪减灾的措施和建议。     

接地面部分溶化条件下冰面轮胎摩擦力的研究

综合运用流体动力润滑理论的能量守恒定律，提出了接地面部分溶化条件下冰面上汽车轮胎的摩擦力或牵引力的理论计算模型。证明了正常工作条件下，接地面上冰产生溶化的可能。对不同制动和驱动条件下轮胎摩擦力进行了计算，取得了同试验数据吻合很好的预测结果。并同已有预测模型进行了比较，比较结果表明：本文依据严格的润滑理论所推导出的冰面轮胎牵引力模型比其它已有理论模型更接近试验结果。     

磁导航车体运动数字控制系统数学模型研究

探讨磁导航车体运动数字控制系统的数学模型。用实验方法建立磁导航车体运动数字控制系统典型环节的时间连续数学模型,结合车体运动机械操纵环节的传统数学模型建立整个控制系统的时间连续数学模型。利用Z变换方法把控制系统时间连续数学模型转换成离散数学模型,引入数字控制系统典型环节的数学模型,建立磁导航车体运动数字控制系统的离散数学模型。设计数字控制系统的二次型最优控制器并进行计算机仿真。仿真分析结果验证了数学模型的有效性。     

钢桥面热塑性沥青混合料铺装车辙预估方法

钢桥面热塑性沥青混合料铺装车辙病害主要是铺装层抵抗剪切变形或塑性流动能力不足引起的,而铺装层混合料的初期压密只会增加车辙量而不足以形成车辙破坏。本文利用通用有限元ANSYS软件提供的蠕变模型和层-应变法,提出了钢桥面热塑性沥青混合料铺装车辙预估方法,并研究了车辙预估模型中参数的确定方法。实例分析表明,本文提出的钢桥面热塑性沥青混合料铺装车辙预估方法是可行的。     

输送成球黏土混砂土质对管线磨损的监测

吹填工程中,疏浚土对管线的磨损是工程实施的重要影响因素,目前针对成球黏土混砂土质对管线的磨损程度尚无相关研究。以厦门蔡庴工程统计数据为基础,对成球黏土混砂土质对管线磨损进行研究,分析不同部位的管线在该种土质情况下的磨损程度,并与定额中典型土质进行对比,确定出该种土质对管线的磨损,以此来指导管线的调整和优化安排。结论对类似工程有较高的指导意义,同时对管线的监测、对比、分析的方法具有普遍适用性。     

Towards a model of hydrodynamic damping for a circular cylinder with helical strakes at low KC

This paper investigates the hydrodynamic damping of a circular cylinder with helical strakes at Keulegan-Carpenter (KC) number from 0.07 to 3 in the presence of steady currents. Experiments were performed with a straked cylinder oscillating in either in-line or cross currents over Reynolds number (based on the oscillating velocity amplitude) varying from 1260 to 54,000. With in-line current being present, the measured drag coefficients of the straked cylinder are found to depend on the ratio between the oscillating velocity amplitude and the steady current velocity. This phenomenon is further confirmed by computational fluid dynamics using large-eddy simulations. The drag coefficients obtained from the numerical simulations agree well with the experimentally determined values. Similar phenomenon is observed for the cases with cross background current. Based on the experimental data, empirical formulae are proposed to evaluate drag coefficients. These results are of importance in estimating the resonant motion and the fatigue life of risers, e.g. water intake risers, in the flow regime of low KC. Finally, recommendations are provided for fatigue analysis of risers with helical strakes from the perspective of engineering practice.     

散杂码头设计中节能增效措施的应用

针对码头工程中如何多方位将节能增效措施融入到设计中的问题,以长江江苏段某散杂码头及其堆场的设计为例,在工艺、结构、电气等方面采用多方位比较的方法,工艺采用装船机、取料机和皮带机变频联动系统、旋转式过渡皮带车以及三工位头部伸缩装置等措施,结构方面陆域轨道基础采用新型专利,电气方面采用风光互补路灯及岸电系统等不同的节能增效措施,使项目更经济合理、效益显著。     

Modeling free-flow speed according to different water depths—From the viewpoint of dynamic hydraulic pressure

In this paper, we propose a method of modeling free flow speed from the viewpoint of hydroplaning. First, the lift forces for different water depths were estimated using Bernoulli’s equation. Compared with the result of the experimental test performed by the Japan Automobile Research Institute, the hydrodynamic pressure coefficient was determined to be 0.03 (tf s²/m⁴). The validation of the predicted lift force is found in another published paper. A very good match is found between the computed values by the proposed numerical model and the data in other published papers. Then, the loss of contact force is considered to evaluate the hydroplaning performance of a tire. To simulate the hydroplaning speed, a tire-sliding model was utilized to obtain the traction and friction forces between the road surface and the tire. The observation data obtained in Japan in 2009 is compared with the physically computed hydroplaning speed, yielding the conclusion that the traction force at the measured desired speed is, on average, 23.4% of the traction force at hydroplaning speed. The analytical model offers a useful tool to quantitatively show that the free flow speed changes as the water depth increase.     

船舶甲板智能抛丸机器人设计

为解决在船舶外场涂装阶段除锈和拉毛施工效率低、质量不稳定、环境污染严重等问题,设计一款用于船舶甲板的智能抛丸机器人。简介该型机器人系统组成,阐述其抛丸分系统、除尘分系统和越障辅助机构的硬件设计及其软件设计,并设计手动遥控和自主导引操作方式。实船测试结果表明,该型机器人可满足船舶甲板除锈清理的工作要求。