综合客运枢纽布局规划体系探讨

布局规划是综合客运枢纽规划建设的顶层设计,文章结合相关课题的研究与实践,对综合客运枢纽布局规划体系涉及的内容、原则和要求、思路和方法、选址要求等进行了归纳和总结,以供参考.     

���й���������Ŧ�滮����

针对我国当前在公交换乘问题上存在的问题，本文在对公交网络、公交系统新的认识基础上，以划分公交服务区，公交线路等级化的思想，提出了城市枢纽规划决策的几种方法:以交通分配预测为基础的会交客流分配数据，得到枢纽的集散客流量强度，进而提出基于公交客流预测的流量决定法；在城市公交网络结构和用地结构的基础上，利用最小控制集算法；利用城市规划中“邻里单元”的概念，作为规划枢纽的分区单位和依据，提出了基于城市布局结构的枢纽决策规划及修正方法等，并提出了以公交换乘枢纽为核心的规划新流程.     

History of wheel/rail contact mechanics: from Redtenbacher to Kalker

The history of wheel/rail contact mechanics is an integrated part of contact mechanics. Problems of wheel/rail contact (damage phenomena and influence of contact mechanics on vehicle dynamics, especially on vehicle stability) have been investigated since the middle of the 19th Century. In 1855, Redtenbacher was the first to consider head checking. Stability investigations started with Boedecker (1887) and were continued by Carter (1916); however, they were not recognized at that time. Stability analysis was only considered to be an integrated step in vehicle design in about 1955 when stability problems started to occur in practice. The scientific foundations of our present investigations are based on Heinrich Hertz, Frederick William Carter and Hans Fromm. The key contributors to research in the last fifty years in the field of wheel/rail contact mechanics are Joost Kalker and Ken Johnson.     

沿江高速铁路引入合肥枢纽的关键问题

规划年度(2030年)合肥枢纽将形成衔接9个方向、13条线路的大型放射状枢纽.但随着沿江高速铁路建设的提前,沿江高速铁路与既有沪蓉铁路在枢纽内共通道能力是否满足需求、枢纽的客运系统布局和客运站分工是否合理、引入车站站型方案是否最优是面临的关键问题.本文根据研究年度(近期2035年、远期2045年)的枢纽客运量及车流特点,结合既有沪蓉铁路的功能定位及分工调整,对枢纽内主要客运站和区段能力进行分析,对引入车站站型进行研究.通过定量和定性分析,从契合城市总体规划、运输组织的便捷性、线路平面条件、工程实施难易度、工程建设条件、投资等多方面综合比选,优化了枢纽的客运系统布局和客运站分工,确定了合理的枢纽引入方案.     

An inverse railway wagon model and its applications

An inverse wagon model was developed to estimate wheel–rail contact forces using only measurements of wagon body responses as inputs. The purpose of this work was to provide mathematical modelling to embed in low-cost devices that can be mounted on each freight wagon in a large wagon fleet. To minimize cost, complication, and the maintenance inconvenience of these devices, the constraint is imposed that transducers and connections are limited to locations on the wagon body. Inputs to the inverse model developed include only vertical and lateral translational accelerations and angular accelerations of roll, pitch, and yaw of the wagon body. The model combines the integration and partial modal matrix (PMM) techniques together to form an IPMM method. Besides wheel–rail contact forces some motion quantities such as the lateral and yaw displacements of wheelset are also predicted. Results from the inverse model were compared with data from full scale laboratory suspension tests for vertical suspension excitations. The inverse model was also compared with results from simulations completed in VAMPIRE^® for more complicated track input profiles. The model results and the applications of the model are discussed.     

车轮外倾角与前束值的设计匹配

车轮外倾角与车轮前束值是车轮定位中的两个重要参数,车轮前束是为了抵消车轮外倾产生的侧滑不利影响,因此前束值要与车轮的外倾角有合理的匹配。综合考虑车辆的结构参数和轮胎特性,基于车轮的侧滑机理,推导出车轮外倾角与前束值的合理匹配关系模型,用试验结果验证了模型的正确性,为在车辆的设计开发过程中,合理的确定车轮的外倾角与前束值提供理论参考。     

可调螺距螺旋桨在挖泥船上的应用及维修

本文介绍了可调螺距螺旋桨在挖泥船上的应用，在各种工况下，可调桨操纵性好，推进效率高，但其构造复杂，造价高，维修难度大。这里以“广州号”挖泥船实际维修案例为研究对象，提出一种可调螺旋桨的维修方法，对国内修船可调浆的维修具有一定的指导意义。     

电磁超声在车轮踏面探伤中的应用研究

介绍了电磁超声的原理及其在车轮踏面探伤中的应用，给出了回波定位的公式及缺陷判断的方法．对检测过程中存在的噪声问题提出了2种可行的解决方案。