高速铁路路基边坡纤维团粒喷播生态防护技术

针对高速铁路路基绿化工程高要求、少维护等特点,提出纤维团粒喷播技术,并详细阐述了其机理及特点.通过在京雄城际铁路路基边坡工程中的应用,归纳总结了该技术施工工艺流程:平整坡面→坡面覆土→铺设铁丝网→喷播基质→养护管理.喷播基质是利用喷播机械将性能优越的基质材料喷附至铁路路基坡面上的.工程应用表明该技术施工快,质量好,养护维修量小,经济性高.     

军港磁谐振式无线供电动态调谐技术分析

磁谐振式无线电能传输具有高效率、灵活性和安全性的优势,利用它来实现军港无线供电具有广阔的应用前景。本文首先建立了磁谐振式无线电能传输系统的互感电路模型,分析了系统特性;在此基础上系统分析了磁谐振式无线电能传输动态调谐技术;最后立足于实际应用提出磁谐振式无线电能传输技术的军港应用亟待解决的几个问题。     

鱼雷发动机三组元比例控制器数值模拟

利用计算流体力学软件Pumplinx模拟鱼雷发动机中三组元比例控制器的内部流场,分析计算中不同压差情况下对比例控制器性能的影响,以及叶片与定子间间隙大小对于比例控制器性能的影响,同时对不同叶片数目下性能进行对比。计算结果表明:由于比例控制器为被动旋转马达结构,其转速和流量均随时间呈周期性脉动变化,随着工作压差增大,转速脉动幅度基本保持不变,而流量和扭矩脉动幅值增加;随着间隙增大,泄漏量增大,但流量、扭矩、转速脉动幅值大幅降低,出口流量较为平稳;叶片数目增多后比例控制器转速降低、排量降低。由计算结果推断出目前比例控制器的最优叶片数目为4。本文可为进一步研究比例控制器精度问题提供参考。     

大型船舶重力抛锚控制系统设计

结合船用锚机使用要求和结构特点,研制一种闭环重力抛锚控制系统,使船舶重力抛锚过程实现自动控制;给出抛锚控制函数及其物理意义;开展实船抛锚试验。结果表明,所研制的系统能有效完成重力抛锚自动控制,满足船舶使用要求。     

动力定位船舶全速度路径跟踪CB导引自适应闭环控制

针对仅使用槽道推进器提供横向推力的动力定位船舶路径跟踪控制问题,建立慢变环境干扰影响下的非线性船舶数学模型,设计带有自适应干扰补偿的反步控制算法来消除环境干扰的影响。引入平行目标接近(CB)导引算法为跟踪控制生成期望速度矢量信号,通过与所提出的自适应反步控制算法相结合,得到不受船舶驱动特性限制的全速度范围动力定位船舶导引跟踪控制算法,应用李雅普诺夫稳定性理论证明系统跟踪误差渐进收敛到零。仿真结果表明通过调整导引算法参数可以调节船舶跟踪过程表现,并可以得到较好的控制精度。     

格拉斯磁环匀强磁场分析

以毕奥-萨伐尔定律为基础,建立亥姆霍兹线圈以及格拉斯磁环中心磁场分布模型,并计算了它们内部的轴向磁感应强度分布,绘出了空间分布图,分析了轴向磁感应强度与x、y坐标的关系,分析结果得到了亥姆霍兹线圈和格拉斯磁环内部匀强磁场分布区域,通过比较得到格拉斯磁环内部的匀强磁场区域比亥姆霍兹线圈内部的匀强磁场分布区域更大的结论。     

激光复合焊工艺参数选择

针对激光复合焊首次应用于船舶制造,参数众多,缺少针对性试验的问题,进行多参数调整、多次对比试验,分析各项参数对激光复合焊质量的影响,结合试验数据提出各项参数的合理范围,确定的重要参数有激光功率、激光吸收率、焦点位置及光丝间距,与电弧相关的参数有焊接速度、送丝速度,以及过渡形式,各项参数的参数调整会直接影响到复合效果,进而影响焊接质量。     

一种新型在线长输管道管体检测技术

文中介绍一种以磁应力为原理的检测技术,即磁力断层摄影检测技术.该技术是一种非接触式的被动检测技术,可以检测出长输管道管体各类型缺陷.首先简单阐述了检测原理,其次详细说明了执行一次检测的全流程工作步骤,以及各步骤的工作内容,然后简要介绍了其独特的经验性计算MAOP和剩余寿命的公式,接着以实际试点检测工作为例,说明了该技术的可行性,最后指明了该技术的优缺点.     

Theory of safety surrogates using vehicle trajectories in macroscopic and microscopic settings: Application to dynamic message signs controlled traffic at work zones

This paper presents a new mathematical framework for obtaining quantitative safety measure using macroscopic as well as microscopic traffic data. The safety surrogate obtained from the macroscopic data is in terms of analysis performed on vehicle trajectories obtained from the macroscopic data. This method of obtaining safety measure can be used for many different types of applications. The safety surrogate for the traffic dynamics are developed in terms of a new concept of Negative Speed Differentials (NSD) that involve a convolution of vehicle speed function obtained from vehicle trajectories and then performing the integration of the square of the output for its negative values. The framework is applicable to microscopic traffic dynamics as well where we can use car following models for microscopic dynamics or the LWR model for macroscopic dynamics. This paper then presents the use of this new safety surrogate on the development of a feedback control law for controlling traffic in work zones using Dynamic Message Signs. A hybrid dynamics model is used to represent the switching dynamics due to changing DMS messages. A feedback control design for choosing those messages is presented as well as a simple simulation example to show its application.     

Mental models of driving and speed: biases,choices and reality

This paper provides a review of research performed by Svenson with colleagues and others work on mental models and their practical implications. Mental models describe how people perceive and think about the world including covariances and relationships between different variables, such as driving speed and time. Research on mental models has detected the time-saving bias [Svenson, O. (1970). A functional measurement approach to intuitive estimation as exemplified by estimated time savings. Journal of Experimental Psychology, 86, 204–210]. It means that drivers relatively overestimate the time that can be saved by increasing speed from an already high speed, for example, 90–130?km/h, and underestimate the time that can be saved by increasing speed from a low speed, for example, 30–45?km/h. In congruence with this finding, mean speed judgments and perceptions of mean speeds are also biased and higher speeds given too much weight and low speeds too little weight in comparison with objective reality. Replacing or adding a new speedometer in the car showing min per km eliminated or weakened the time-saving bias. Information about braking distances at different speeds did not improve overoptimistic judgments of braking capacity, but information about collision speed with an object suddenly appearing on the road did improve judgments of braking capacity. This is relevant to drivers, politicians and traffic regulators.