套筒式收发球在天然气管道内检测中的应用

为解决特殊清管器和检测器以及有特殊结构收发球筒的管道难以实施内检测的问题,以某天然气管道为例,详细介绍了在多节检测器安装困难、收发球筒尺寸过短、附件安装位置不合适等限制条件下,采用套筒式收发球方式对管道进行收发球作业,安全顺利完成了管道内检测。结论认为套筒式收发球能够在不进行收发球筒改造的前提下,完成带有特殊结构收发球筒的管道内检测作业。     

燃气向心透平的非定常流动特性研究

以燃气为工质的向心透平常用于微型燃气轮机系统中,有着重要的工程应用价值。本研究关注燃气向心透平的非定常流动特性,基于一台功率等级为1MW,转速为30000rpm的燃气向心透平,首先进行了热力设计,得到了其关键位置的燃气工质热力参数及透平的模型尺寸。其次基于三维粘性数值模拟计算的方法,采用SST k-ω湍流模型及六面体结构化网格在商用软件CFX中对燃气向心透平进行了定常与非定常气动计算,详细分析了其气动特性及非定常流动状况。最终,分析了这一燃气向心透平的非定常气流激振力在时域及频域分布,并准确评估了其流量、扭矩、功率及效率等关键参数。     

喷孔位置对船用天然气发动机燃烧及排放影响的模拟研究

为了探究天然气与柴油喷孔位置对天然气发动机燃烧和排放的影响,基于L23/30天然气发动机,建立了柴油引燃天然气的发动机模型,利用CONVERGE软件对燃烧过程和排放进行模拟分析。模拟结果表明：由于天然气与柴油喷孔位置变化的影响,会导致柴油引燃天然气在空间的变化,因此对发动机的燃烧和排放造成了影响,通过对比不同喷嘴间的距离和不同喷嘴分布的设计方案得出,采用中心对称设计时获得了较好的燃烧和排放性能。     

Life cycle assessment of heated apron pavement system operations

Heated pavement systems (HPS) offer an attractive alternative to the cumbersome process of removing ice and snow from airport pavements using traditional snow removal systems. Although snow and ice removing efficiency and economic benefits of HPS have been assessed by previous studies, their environmental impact is not well known. Airport facilities offering public or private services need to evaluate the energy consumption and global warming potential of different types of snow and ice removal systems. Energy usage and emissions from the operations of hydronic heated pavement system using geothermal energy (HHPS-G), hydronic HPS using natural gas furnace (HHPS-NG), electrically heated pavement system (EHPS), and traditional snow and ice removal system (TSRS) are estimated and compared in this study using a hybrid life cycle assessment (LCA). Based on the system models assessed in this study, HPS application in the apron area seems to be a viable option from an energy or environmental perspective to achieve ice/snow free pavement surfaces without using mechanical or chemical methods. TSRS methods typically require more energy and they produce more greenhouse gas (GHG) emissions compared to HPS during the operation phase, under the conditions and assumptions considered in this study. Also, HPS operations require less energy and have less GHG emissions during a snow event with a smaller snowfall rate and a larger snow duration.     

Electric vehicles for greenhouse gas reduction in China: A cost-effectiveness analysis

There have been ongoing debates over whether battery electric vehicles contribute to reducing greenhouse gas emissions in China’s context, and if yes, whether the greenhouse gas emissions reduction compensates the cost increment. This study informs such debate by examining the life-cycle cost and greenhouse gas emissions of conventional vehicles, hybrid electric vehicles and battery electric vehicles, and comparing their cost-effectiveness for reducing greenhouse gas emissions. The results indicate that under a wide range of vehicle and driving configurations (range capacity, vehicle use intensity, etc.), battery electric vehicles contribute to reducing greenhouse gas emissions compared with conventional vehicles, although their current cost-effectiveness is not comparable with hybrid electric vehicles. Driven by grid mix optimization, power generation efficiency improvement, and battery cost reduction, the cost-effectiveness of battery electric vehicles is expected to improve significantly over the coming decade and surpass hybrid electric vehicles. However, considerable uncertainty exists due to the potential impacts from factors such as gasoline price. Based on the analysis, it is recommended that the deployment of battery electric vehicles should be prioritized in intensively-used fleets such as taxis to realize high cost-effectiveness. Technology improvements both in terms of power generation and vehicle electrification are essential in improving the cost-effectiveness of battery electric vehicles.     

管道输煤工程中煤浆沉降特性的应用分析

文中对煤浆沉降特性进行了详细分析,结论表明质量分数和粒度是影响煤浆颗粒沉降速度的主要因素。然后,从煤浆沉降特性角度出发,总结了管道输煤工程中煤浆制备、筛检超粗颗粒、煤浆储存、长距离管道输送以及终端脱水等环节需采取的相应措施及要求,为煤浆输送管道安全、经济、可靠地运行提供参考。     

A comparative life-cycle energy and emissions analysis for intercity passenger transportation in the U.S. by aviation,intercity bus,and automobile

Intercity passenger trips constitute a significant source of energy consumption, greenhouse gas emissions, and criteria pollutant emissions. The most commonly used city-to-city modes in the United States include aircraft, intercity bus, and automobile. This study applies state-of-the-practice models to assess life-cycle fuel consumption and pollutant emissions for intercity trips via aircraft, intercity bus, and automobile. The analyses compare the fuel and emissions impacts of different travel mode scenarios for intercity trips ranging from 200 to 1600 km. Because these modes operate differently with respect to engine technology, fuel type, and vehicle capacity, the modeling techniques and modeling boundaries vary significantly across modes. For aviation systems, much of the energy and emissions are associated with auxiliary equipment activities, infrastructure power supply, and terminal activities, in addition to the vehicle operations between origin/destination. Furthermore, one should not ignore the embodied energy and initial emissions from the manufacturing of the vehicles, and the construction of airports, bus stations, highways and parking lots. Passenger loading factors and travel distances also significantly influence fuel and emissions results on a per-traveler basis. The results show intercity bus is generally the most fuel-efficient mode and produced the lowest per-passenger-trip emissions for the entire range of trip distances examined. Aviation is not a fuel-efficient mode for short trips (<500 km), primarily due to the large energy impacts associated with takeoff and landing, and to some extent from the emissions of ground support equipment associated with any trip distance. However, aviation is more energy efficient and produces less emissions per-passenger-trip than low-occupancy automobiles for trip distances longer than 700–800 km. This study will help inform policy makers and transportation system operators about how differently each intercity system perform across all activities, and provides a basis for future policies designed to encourage mode shifts by range of service. The estimation procedures used in this study can serve as a reference for future analyses of transportation scenarios.     

Including congestion effects in urban road traffic CO2 emissions modelling: Do Local Government Authorities have the right options?

Tailpipe emissions from vehicles on urban road networks have damaging impacts, with the problem exacerbated by the common occurrence of congestion. This article focuses on carbon dioxide because it is the largest constituent of road traffic greenhouse gas emissions. Local Government Authorities (LGAs) are typically responsible for facilitating mitigation of these emissions, and critical to this task is the ability to assess the impact of transport interventions on road traffic emissions for a whole network.This article presents a contemporary review of literature concerning road traffic data and its use by LGAs in emissions models (EMs). Emphasis on the practicalities of using data readily available to LGAs to estimate network level emissions and inform effective policy is a relatively new research area, and this article summarises achievements so far. Results of the literature review indicate that readily available data are aggregated at traffic level rather than disaggregated at individual vehicle level. Hence, a hypothesis is put forward that optimal EM complexity is one using traffic variables as inputs, allowing LGAs to capture the influence of congestion whilst avoiding the complexity of detailed EMs that estimate emissions at vehicle level.Existing methodologies for estimating network emissions based on traffic variables typically have limitations. Conclusions are that LGAs do not necessarily have the right options, and that more research in this domain is required, both to quantify accuracy and to further develop EMs that explicitly include congestion, whilst remaining within LGA resource constraints.     

Greenhouse gas emissions from road construction: An assessment of alternative staging approaches

The greenhouse gas (GHG) emissions associated with road construction activities are analyzed. The main focus of this analysis is on the vehicle emissions associated with alternative project staging approaches, specifically a full closure of the road during construction, versus an intermittent road closure. The analysis includes the direct and upstream emissions associated with materials, construction equipment, mobilization of resources to the work site, and maintenance activity associated with the project over its lifetime. The analysis is based on one case study of a road project in New Jersey. The assumptions underlying the staging analysis are based on hypothetical approaches. Results provide an assessment of the main sources of project related emissions and the ability to minimize total project emissions by minimizing traffic disruption. In the analysis with a full closure of the road, traffic disruption accounts for 26% of total emissions, while with an intermittent road closure, traffic disruption accounts for only 2% of total emissions. The other main sources are from materials and life-cycle maintenance. The analysis demonstrates the feasibility of minimizing project related GHG emissions during road construction activities.     

液化天然气(LNG)汽车日常检查方法及维护技术综述

天然气是一种优质的替代燃料,具有污染小、安全系数高、运行费用低等优点。天然气已经成为城市公共交通领域应用最为成功和广泛的车辆替代燃料技术,为推动交通运输行业的节能减排做出了显著的贡献。液化天然气汽车,作为天然气汽车的一种类型,与传统汽柴油车相比,液化天然气汽车安装了包括液化天然气气瓶、气管路及各种控制阀门和仪表在内的专用装置,在对液化天然气汽车进行日常检查时需要针对液化天然气汽车的专用装置进行重点检查。本文则针对液化天然气汽车的特点,对液化天然气汽车的正确使用方法、日常检查方法及维护技术要求、以及相关注意事项三个方面进行了解读,为指导液化天然气汽车进行日常检查与定期维护提供了技术参考。