m阶非齐次马氏信源的一类Shannon-Mcmillan定理

采用构造相容分布与非负上鞅的方法研究了m阶马氏信源相对熵密度的强极限定理,由此得出若干马氏信源、无记忆信源的随机Shannon-Mcmillan定理.并将已有的马氏信源的结果加以推广.     

Comparative analysis of household car,motorcycle and bicycle ownership between Osaka metropolitan area,Japan and Kuala Lumpur,Malaysia

The interactions among different types of vehicle ownership including car, motorcycle and bicycle are examined by developing simultaneous vehicle ownership models in this study. Large scale person trip survey data for Osaka metropolitan area, Japan and Kuala Lumpur, Malaysia are used for empirical analysis. The results suggest that population density at residential area significantly and negatively affects car ownership for both areas, and that the effects are larger for Osaka metropolitan area than for Kuala Lumpur. Also, bicycle ownership becomes higher at higher population density area for Osaka area, while higher at lower population density area for Kuala Lumpur, which represents the different usage patterns of bicycle between the two areas.

挖泥船产量计密度测量精度分析及放射源核素、活度选择研究

通过理论分析结合长江武汉航道工程局挖泥船施工现场情况提出以清水计数率作为密度测量精度的评价指标，在此基础上推导出针对不同排泥管径所需放射源活度的计算公式，据此结合现场条件建立放射源核素及活度的选择条件，为提高设备的有效性提供依据。     

某越野汽车制动管断裂原因探究

针对某越野车制动管经常断裂的故障，采用自功率谱密度、模态试验和数据统计方法，分析了影响制动管断裂的主要因素。认为从分动箱到前桥传动轴二阶振动是引起制动管断裂的关键因素。针对该因素介绍和讨论了几个有效的、快速和实用的解决方案：将前桥不等速十字轴式刚性万向节，更换为球笼式等速万向节；将与制动卡钳相连的制动钢管更换为一小段低膨胀、耐高压的软管。针对制动管断裂的原因，改变该车在石块路上进行可靠性试验考核制动管的试验规范，用高速行驶试验来考核制动管的可靠性。     

关联效应对CaCuO2的电荷与自旋密度分布的影响

采用杂化密度泛函方法和哈垂一福克方法对CaCuO2的电荷与自旋密度的分布进行了研究．CuO2层的电子结构具有明显的二维特征．电子间的关联效应使Cu离子的自旋极化被削弱的同时，增强了O离子的自旋极化效应．     

装配式梁桥横向协同工作性能度量指标的研究

为了表征运营期间装配式梁桥的横向协同工作性能,提出了一种间接度量指标——相邻预制梁间的应变相关系数;同时建立了装配式梁桥的简化力学模型,通过推导建立了该指标的解析表达式。理论分析和数值仿真研究表明,在保证足够的样本长度条件下,交通流荷载趋向统计稳定,此时结构特性成为该度量指标的唯一影响因素,证明了该指标具备表征装配式梁桥横向协同工作性能的条件。     

MSK信号的仿真及其优势分析

采用解析法对MSK信号的调制方式、解调方式以及功率谱密度进行仿真分析，得出MSK调制方式相对于BPSK和QPSK调制方式具有优势。     

Deconstructing development density: Quality, quantity and price effects on household non-work travel

Smart growth and transit-oriented development proponents advocate increasing the density of new land development and infill redevelopment. This is partly in order to reduce auto use, by reducing distances between trip origins and destinations, creating a more enjoyable walking environment, slowing down road travel, and increasing the market for transit. But research investigating how development density influences household travel has typically been inadequate to account for this complex set of hypotheses: it has used theoretically unjustified measures, has not accounted for spatial scale very well, and has not investigated potentially important combinations of measures. Using data from a survey of metropolitan households in California, measures of development density corresponding to the main hypotheses about how density affects travel—activity density affecting distance traveled, network load density affecting the speed of auto travel, and built form density affecting the quality of walking—are tested as independent variables in models of auto trip speed and individual non-work travel. Residential network load density is highly negatively correlated with the speed of driving, and is also highly correlated with non-work travel, both singly and in combination with other measures. Activity density and built form density are not as significantly related, on their own. These results suggest that denser development will not influence travel very much unless road level-of-service standards and parking requirements are reduced or eliminated.     

沥青路面心样密度试验方法应用研究

通过对沥青路面上钻取的非干燥试件进行风干和烘干试验,计算不同试验条件下心样的毛体积相对密度和压实度。研究结果表明,风干12 h以后继续延长风干时间,对路面压实度的计算结果影响甚微,而在不需进行其他试验时,采用（60±5）℃烘箱烘干0.5-1.5 h后称其空中质量进行路面压实度评价是合适的,且有利于指导沥青路面的连续施工。     

适航水深测量技术介绍与探讨

随着航运业的日益发展 ,船舶大型化和港口深水化趋势越来越明显 ,淤泥质港口使用者及管理部门对采用适航水深的要求越来越强烈 ,而要想利用适航水深 ,首先必须解决适航水深测量技术问题。文中对适航水深测量技术进行了介绍及分类 ,并对各种方法进行了比较