集通铁路长大隧道GSM-R冗余方案研究

针对集通铁路的长大隧道,论述分布式基站和数字光纤直放站的两种冗余方案,通过分析比较两种方案的单网交织以及同站址双网冗余覆盖方式,推荐采用分布式基站单网交织冗余方案。     

港口系统设备钢轨连接技术

港口系统设备一般外型尺寸和质量较大，多采用截面积较大的起重机钢轨作为行走轨道。根据港口系统设备使用特点和工程施工现场条件，结合码头和堆场结构，借鉴轻轨和重轨的无缝连接技术，对各种焊接工艺进行比较，分析钢轨的材料组成和焊接过程内部组织变化，推荐一种保证设备使用安全和操作人员舒适度、连接质量稳定、便于维护、操作简便、满足港口系统设备钢轨安装现场要求的连接方法和工艺,有助于实现工期目标，可推广应用于矿山、港口、电厂、码头及堆场等大质量机车或起重设备的钢轨连接。     

《电加热道岔融雪系统设备》TB/T3539-2018解读

解读《电加热道岔融雪系统设备》与《客运专线铁路信号产品暂行技术条件汇编——电加热道岔融雪系统设备》标准的共性部分,并从编制背景、标准定位、技术要求、试验方法和检验规则等方面,分析两者之间的差异性.     

浅谈车用电动空压机在新能源汽车上的应用

文章以车用电动空压机为研究内容,对其使用环境进行分析,同时对其在新能源车辆上控制策略做了分析,最后对其管路布局做分析,望对各大主机后续空压机管路布局有所借鉴。     

Environmental lumping for efficient fatigue assessment of large-diameter monopile wind turbines

Fatigue damage is one of the governing factors for the design of offshore wind turbines. However, the full fatigue assessment is a time-consuming task. During the design process, the site-specific environmental parameters are usually condensed by a lumping process to reduce the computational effort. Preservation of fatigue damage during lumping requires an accurate consideration of the met-ocean climate and the dynamic response of the structure. Two lumping methods (time-domain and frequency-domain) have been evaluated for a monopile-based 10 MW offshore wind turbine, both based on damage-equivalent contour lines. Fatigue damage from lumped load cases was compared to full long-term fatigue assessment. The lumping methods had an accuracy of 94–98% for the total long-term fatigue damage and 90% for individual wind speed classes, for aligned wind and waves. Fatigue damage was preserved with the same accuracy levels for the whole support structure. A significant reduction of computational time (93%) was achieved compared to a full long-term fatigue assessment. For the cases with 30° and 60° wind-wave misalignment, there was a mean underestimation of approximately 10%. Variations in penetration depth did not affect the selection of the lumped sea-state parameters. This work presents a straightforward method for the selection of damage-equivalent lumped load cases, which can adequately preserve long-term fatigue damage throughout the support structure, providing considerable reduction of computational effort.     

异形网箱生态结构的设计及应用

为保护落成洲整治建筑物头部潜堤根部及LL3~LL5号丁坝根部的现有植被,在标准网箱结构的基础上,研发出异形网箱结构来替代抛石筑堤。异形网箱生态堤在满足工程功能需求的前提下,完整保护了落成洲的原有生态环境,可为航道整治生态结构设计提供参考。     

Analysis of cross effect on inherent deformation during the line heating process – Part 1 – Single crossed heating lines

This paper describes the effect of previous heating on inherent deformation by a subsequent heating line, more specifically, the case of two heating lines intersecting (crossing) each other. The paper has been divided into two parts. In the first part, the case of single crossed heating lines is studied in detail. The second part of the paper, discusses the case of more than one crossed heating lines. The novelty of the work lies in revealing the cross effect and how, factors such as, for example, the heating condition and the plate geometry, influence the resulting inherent deformation of crossed heating. In addition, relationships to easily get these influences are provided. The results are suitable for a wide range of heating conditions and plate thickness.     

Identifying preferences for public transport investments under a constrained budget

As urban areas face increasing demands for new transport infrastructure to promote a sustainable future with an increasing reality of constrained government budgets, the debate on whether we should focus on rail or bus-based investments continues unabated in many jurisdictions. Associated with the debate is an emotional (or ideological) bias by communities in favour of one mode, especially rail, which carries much sway at the political level as if there is no budget constraint. This paper presents a stated choice experiment to investigate this context as two unlabelled options described by 20 potential drivers of community preferences for improved public transport, where each choice scenario is conditioned on an estimated construction cost and a total annual transport infrastructure budget for the relevant geographical jurisdiction. This is followed by a labelling of each alternative to reveal whether the option is bus rapid transit (BRT) or light rail (LRT) and to establish whether this additional information influences preference revision. Data is collected in all eight capital cities of Australia in mid 2014. Mixed logit models with heteroscedastic conditioning in terms of the cost of the project infrastructure and whether the alternative is labelled BRT or LRT, provide new evidence on the nature and extent of community modal bias in a budget-constrained choice setting. The conclusions are twofold. On the one hand, if a fully compensatory choice rule is assumed (as is common in all previous modal comparison studies), LRT is predominantly preferred over BRT despite budgetary constraints, similarities in quality of service attributes and the opportunity to choose a greater network coverage for a given construction cost. However, when we allow for attribute non-attendance (a semi-compensatory choice rule), the modal bias is no longer a significant driver of preferences.     

船舶压载舱沉积物接收处置现状、问题及履约管理对策

《国际船舶压载水和沉积物控制与管理国际公约(2004)》要求妥善处理和处置压载舱沉积物,以防止有害生物入侵。为研究履约现状,选取13家从事压载水沉积物清理、接收及处理作业的修船厂进行了系统调研,结果表明普遍存在防污染措施不全、接收处理作业不规范、接收设施技术标准缺失、管理要求不明确等问题。在分析压载水沉积物的来源、危害、产生量等特性的基础上,结合公约和国内要求,从标准规范完善、监管部门协作、接收设施配套、公约法规宣贯和科技研发支撑等方面分析提出了履约对策。研究成果为有关压载水沉积物相关标准规范、技术政策的制定提供参考,有助于加强压载舱沉积物防污染管理,提升国际公约履行水平。     

基于AIS网络的VTS信息智能推送应用研究

文中在通过利用智能手段采用AIS网络对航行计划、交通管制、水文气象等VTS相关信息进行推送的相关领域进行了研究,以便提高船舶信息获取效率,减少VTS服务工作强度。