Maritime education in cross cultural settings

Cross-cultural interaction is growing in our global economy. Expanding maritime trade in ports around the world reinforces the need for standardized training and education to cope with new global technologies and logistics systems. Working, studying and interacting in cross-cultural settings can lead to problems of misunderstandings and misinterpretations among people having different worldviews.     

S^2 BHCA Multiple AUVs cooperation oriented control architecture

Oceanographic survey, or other similar applications should be the applications of multiple AUVs. In this paper, the skill ＆ simulation based hybrid control architecture （S^2BHCA） as the controller＇s design reference was proposed. It is a multi-robot cooperation oriented intelligent control architecture based on hybrid ideas. The S^2BHCA attempts to incorporate the virtues of the reactive controller and of the deliberative controller by introducing the concept of the ＂skill＂. The additional online task simulation ability for cooperation is supported, too. As an application, a multiple AUV control system was developed with three ＂skills＂ for the MCM mission including two different cooperative tasks. The simulation and the sea trials show that simple task expression, fast reaction and better cooperation support can be achieved by realizing the AUV controller based on the S^2BHCA.     

莆田显惠侯神灵及其对船员的保护

著名的莆田祥应庙前身是当地白杜方氏家族专用的祠堂.庙里供奉的神灵显惠侯,当地的百姓把他视为农业生产及生命财产的保护神,同时,他也是航海者信奉的神灵.本文作者以周尾和朱纺这两人出海之前均到该庙膜拜的典型事例,分析指出上述二人的出海经商与白杜方氏家族存在着直接关系,可能是受雇于当时既从事农业又涉猎海上贸易的白杜方氏家族,因此宋时显惠侯只是一个地方性的神灵,只对某一部分人提供某些特定的庇护,并不具有普遍意义.     

Fluxes of dissolved inorganic carbon in three estuarine systems of the Cantabrian Sea (north of Spain)

The diffusive and in situ fluxes of dissolved inorganic carbon (DIC) and total alkalinity (TA) have been measured and an estimation has been made of the water–atmosphere fluxes of CO₂ in three estuarine systems of the Cantabrian Sea during the spring of 1998. Each of these systems undergoes a different anthropogenic influence. The diffusive fluxes of dissolved inorganic carbon and total alkalinity obtained present values ranging between 0.54–2.65 and 0.0–2.4 mmol m⁻² day⁻¹, respectively. These ranges are in agreement with those of other coastal systems. The in situ fluxes are high and extremely variable (35–284 mmol TA m⁻² day⁻¹, 43–554 mmol DIC m⁻² day⁻¹ and 22–261 mmol dissolved oxygen (DO) m⁻² day⁻¹), because the systems studied are very heterogeneous. The values of the ratio of the in situ fluxes of TA and DIC show on average that the rate of dissolution of CaCO₃ is 0.37 times that of organic carbon oxidation. Equally, the interval of variation of the relationship between the benthic fluxes of inorganic carbon and oxygen (F_DIC/F_DO) is very wide (0.3–13.9), which demonstrates the different contributions made by the processes of aerobic and anaerobic degradation of the organic matter, as well as by the dissolution–precipitation of CaCO₃. The water–atmosphere fluxes of CO₂ present a clear dependence on the salinity. The brackish water of these systems (salinity<20), where maximum fluxes of 989 mmol m⁻² day⁻¹ have been estimated, act as a source of CO₂ to the atmosphere. The more saline zones of the estuary (salinity>30) act as a sink of CO₂, with fluxes between −5 and −10 mmol m⁻² day⁻¹.     

Active Roll Control for Passenger Cars

The development of a mathematical model of a limited bandwidth hydro-pneumatic suspension that is incorporated into a vehicle handling model is described. The combined model is used to evaluate a suitable control strategy for eliminating body roll during a cornering manoeuvre. The philosophy behind the roll control strategy has been to use feedback measurements of the body motions which do not compromise the ride control. A study of the influence of the position of the body motion feedback transducer on the effectiveness of the system to reduce the body roll is presented. Non-linear modelling of the suspension components for a 0.8g cornering manoeuvre has revealed performance limitations. Conclusions are drawn as to the effectiveness of the control scheme.     

Benthic community patterns reflect water column processes in the Northeast Water polynya (Greenland)

Benthic community patterns were investigated in the Northeast Water polynya (Greenland) during the summers of 1992 and 1993 to elucidate to what extent the bottom fauna is influenced by the dynamics of the overlying water. Five different fractions of the benthos (foraminiferans, nematodes, polychaetes, peracarid crustaceans, and epibenthic megafauna), ranging in average adult body size over 6 orders of magnitude (from about 100 μm to about 10 cm), were sampled quantitatively at 69 stations in water depths from 40 to 515 m. Total abundances of nematodes, polychaetes and peracarid crustaceans were found to be primarily correlated with parameters characterizing the potential benthic food supply (water column pigment and nitrate concentrations, sediment bound pigments and sediment biological activity), whereas abundances of foraminiferans and megabenthos were largely associated with seabed properties. Four benthic zones were distinguished by separately analyzing the faunistic composition and distribution of the five community fractions for Ob Bank, Western Westwind Trough, Eastern Westwind Trough, and Belgica Trough. This pattern was shown principally to reflect pelagic regimes differing in surface water hydrography, ice cover and euphotic productivity. This is the first time that a synoptic study of several benthic community portions spanning such a range in sizes and life styles has been performed in a polar shelf ecosystem. Our results indicate that abundances as well as composition of Arctic benthos are largely influenced by mesoscale pelagic processes, and thus provide further evidence for the importance of the benthic-pelagic coupling in high latitude seas.     

A second order volume of fluid （VOF） scheme for numerical simulation of 2-D breaking waves

Among all environmental forces acting on ocean structures and marine vessels, those resulting from wave impacts are likely to yield the highest loads. Being highly nonlinear, transient and complex, a theoretical analysis of their impact would be impossible without numerical simulations. In this paper, a pressure-split two-stage numerical algorithm is proposed based on Volume Of Fluid (VOF) methodology. The algorithm is characterized by introduction of two pressures at each half and full cycle time step, and thus it is a second-order accurate algorithm in time. A simplified second-order Godunov-type solver is used for the continuity equations. The method is applied to simulation of breaking waves in a 2-D water tank, and a qualitative comparison with experimental photo observations is made. Quite consistent results are observed between simulations and experiments. Commercially available software and Boundary Integral Method (BIM) have also been used to simulate the same problem. The results from present code and BIM are in good agreement with respect to breaking location and timing, while the results obtained from the commercial software which is only first-order accurate in time has clearly showed a temporal and spatial lag, verifying the need to use a higher order numerical scheme.     

Experimental study on the width of the turbulent area around bridge pier

At present, the method of calculating the turbulent flow width around the bridge pier is not given in the "Standard for Inland River Navigation" (GB50139-2004) in China, and the bridge designer usually increases the bridge span in order to ensure the navigation safety, which increases both of the structural design difficulty and the project investments. Therefore, it is extremely essential to give a research on the turbulent flow width around the bridge pier. Through the experiments of the fixed bed and the mobile bed, the factors influencing the turbulent flow width around the bridge pier have been analyzed, such as the approaching flow speed, the water depth, the angles between the bridge pier and the flow direction, the sizes of bridge pier, the shapes of the bridge pier, and the scouring around the bridge pier, etc. Through applying the dimension analytic method to the measured data, the formula of calculating the turbulent flow width around the bridge pier is then inferred.     

Maritime liner shipping and the stevedoring industry: market structure and competition strategies

Globalization, liberalization, competition and spatial interaction are significant factors affecting the transformation of manufacturing industries worldwide. In the transportation and logistics industry, however, cooperation is becoming even more critical than competition in determining firms' efficiency. Cooperation has always characterized the liner sector in which strategic alliances, mergers and acquisitions have generated twin effects: notable increases in ship size and falls in freight rates. Meanwhile, the stevedoring industry is undergoing privatization-driven consolidation and the emergence of global pure terminal operators. This article focuses on vertical integration between global carriers and terminal operators. We address the following key current issues:

• dedicated terminals as a strategy for cutting costs and controlling integrated transport chains;
• the struggle for supply chain control, involving global carriers versus global terminal operators, driven by financial power and technical and managerial capability.

We close analysing one of the core problems of the market, namely the evolving role of the dedicated terminals. For the pure stevedores they represent an opportunity to secure a cargo, while in the hands of the liners they enable cost stability and the possibility to put pressure on pure terminal operators.     

Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)