高纯NF3气体管路系统的预处理

高纯三氟化氮气体在电子工业中有着广阔的应用前景,在生产过程中常存在微粒子的污染问题,本文介绍了目前工业化生产三氟化氮(NF3)过程中微粒子产生的原因及几种不锈钢管路和阀门、附件的处理方法。     

电子特种气体及我国发展现状

本文研究了电子特种气体的种类、纯度以及在半导体工业中的应用状况,从技术上讨论了电子特种气体的纯净度对半导体工业的影响。结合国内电子特种气体的市场综述了国内电子特种气体的生产厂家及其现状,指出了国内电子特种气体产业存在的问题以及我国电子特种气体产业的发展前景。     

1200个日夜倾力守护 护航舟岱天堑变通途——舟山海事部门保障舟岱跨海大桥全线贯通纪实

2月4日14时18分,随着长白匝道最后一片钢箱梁吊装完成,此前贯通的舟岱跨海大桥主线与长白岛正式连接成为一个整体,舟岱跨海大桥实现全线贯通。作为宁波舟山港主通道项目重要一环,舟岱跨海大桥由舟山本岛马目入海,在岱山岛双合登陆,主线全长16.34公里,通车后把舟山与岱山岛之间通行时间缩短至20分钟以内,为舟岱人民带来巨大便利。该项目于2017年9月正式开工建设。在舟岱跨海大桥开工建设之初,舟山海事局就指派新成立的海巡执法支队承担舟岱跨海大桥现场监管任务。     

国产长输管道焊接施工装备研究

近年来,长输油气管道焊接施工装备技术快速发展,大量新型管道施工装备投入管道工程现场应用,比如管道全位置自动焊机、管道管端坡口机、管道内环缝自动焊机已被分别用于管口焊接、坡口加工、管口组对。在大厚壁、高钢级、大口径管道施工中,这些设备既提高了管道施工效率,也提高了管口的焊接质量。根据实际应用情况,阐述了前述设备的结构、性能和其他技术特点,以使相关技术人员对国产管道施工装备有进一步的认识。     

An algorithm for finding reasonable paths in transit networks

In this paper, reasonable paths in transit networks are defined as possible paths that satisfy the acceptable time criterion and transfer‐walk criterion. A recursive algorithm for finding all of the reasonable paths in a transit network that does not involve a rapid increase in program run‐time with network size is presented. Realistic transit networks in Hong Kong and Guangzhou were selected as case studies of the different phases of the development of a trip planning system. Transport planning practitioners and potential users were invited to test the system to evaluate its performance. The results of the prototype evaluation were satisfactory, and the viability of the system as a useful tool for supporting decision‐making has been confirmed by the positive feedback that was obtained from survey questionnaires.     

水泥混凝土路面质量控制浅析

对目前水泥混凝土路面出现的常见问题进行分析,查找原因后,针对问题采取的必要措施、质量控制及解决方案进行了论述。     

非线性负荷及其对电能质量的影响分析

介绍非线性负荷的种类及用电特性,分析非线性负荷对电能质量的影响,并搭建电路进行仿真。     

Automatic product image classification with multiple support vector machine classifiers

For the task of visual-based automatic product image classification for e-commerce, this paper constructs a set of support vector machine (SVM) classifiers with different model representations. Each base SVM classifier is trained with either different types of features or different spatial levels. The probability outputs of these SVM classifiers are concatenated into feature vectors for training another SVM classifier with a Gaussian radial basis function (RBF) kernel. This scheme achieves state-of-the-art average accuracy of 86.9% for product image classification on the public product dataset PI 100.     

基于截面力设定的纵梁轻量化半经验设计

采用半经验方法,通过分析同级对标车型的纵梁各断面通过力,获得了纵梁通过力的设计目标;根据本文提出的薄壁管梁压溃力公式,反推出纵梁所采用的尺寸、材料;根据结构轻量化原则,在概念设计阶段确定了纵梁的最优设计参数。通过对碰撞加速度、吸能盒、纵梁的试验与仿真结果对比可知,本文所提设计方法合理有效。