S^2 BHCA Multiple AUVs cooperation oriented control architecture

Oceanographic survey, or other similar applications should be the applications of multiple AUVs. In this paper, the skill ＆ simulation based hybrid control architecture （S^2BHCA） as the controller＇s design reference was proposed. It is a multi-robot cooperation oriented intelligent control architecture based on hybrid ideas. The S^2BHCA attempts to incorporate the virtues of the reactive controller and of the deliberative controller by introducing the concept of the ＂skill＂. The additional online task simulation ability for cooperation is supported, too. As an application, a multiple AUV control system was developed with three ＂skills＂ for the MCM mission including two different cooperative tasks. The simulation and the sea trials show that simple task expression, fast reaction and better cooperation support can be achieved by realizing the AUV controller based on the S^2BHCA.     

斜腿刚构桥几何布局的优化设计

采用数学规划的方法从静力和动力两方面对斜腿刚构桥的几何布局进行优化设计。静力优化设计的优化目标是截面截面应力平方均值最小，动力优化设计的优化目标是结构自振周期平方和最小。采用了直接搜索法寻优。通过算例可知，这两种优化设计方法均可行，且均为刚性设计。     

商船防海盗装置开发

介绍自行开发的商船防海盗装置.利用热释原理,采用多媒体、图像处理和计算机等技术,将视音频信号转化为数字信号,动态实时地监控船舶及其周围状况.该装置由传感器、信号传输装置、主控制器和报警执行机构等组成.系列产品具有支持多路视音频,全天候实时动态侦测及联动自动报警,实时数据库管理、操作多级管理、操作日志与报警日志管理等功能.     

发动机电子调速系统的改造

我公司于2001年引进了3台轮胎式门式起重机.这批起重机的发动机-发电机组配备的是德国DEUTZ BF8M1015C型发动机,其中发动机原配装的调速器为WOODWARD的GENDEC的数字电子调速器,型号为8405-551.     

A second order volume of fluid （VOF） scheme for numerical simulation of 2-D breaking waves

Among all environmental forces acting on ocean structures and marine vessels, those resulting from wave impacts are likely to yield the highest loads. Being highly nonlinear, transient and complex, a theoretical analysis of their impact would be impossible without numerical simulations. In this paper, a pressure-split two-stage numerical algorithm is proposed based on Volume Of Fluid (VOF) methodology. The algorithm is characterized by introduction of two pressures at each half and full cycle time step, and thus it is a second-order accurate algorithm in time. A simplified second-order Godunov-type solver is used for the continuity equations. The method is applied to simulation of breaking waves in a 2-D water tank, and a qualitative comparison with experimental photo observations is made. Quite consistent results are observed between simulations and experiments. Commercially available software and Boundary Integral Method (BIM) have also been used to simulate the same problem. The results from present code and BIM are in good agreement with respect to breaking location and timing, while the results obtained from the commercial software which is only first-order accurate in time has clearly showed a temporal and spatial lag, verifying the need to use a higher order numerical scheme.     

Experimental study on the width of the turbulent area around bridge pier

At present, the method of calculating the turbulent flow width around the bridge pier is not given in the "Standard for Inland River Navigation" (GB50139-2004) in China, and the bridge designer usually increases the bridge span in order to ensure the navigation safety, which increases both of the structural design difficulty and the project investments. Therefore, it is extremely essential to give a research on the turbulent flow width around the bridge pier. Through the experiments of the fixed bed and the mobile bed, the factors influencing the turbulent flow width around the bridge pier have been analyzed, such as the approaching flow speed, the water depth, the angles between the bridge pier and the flow direction, the sizes of bridge pier, the shapes of the bridge pier, and the scouring around the bridge pier, etc. Through applying the dimension analytic method to the measured data, the formula of calculating the turbulent flow width around the bridge pier is then inferred.     

如何防治公路建设中的水土流失

分析了公路建设中水土流失的原因，针对不同情况预测了可能产生水土流失的危害并提出了水土保持的措施。     

Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)     

Dynamic Simulation of a Smart Crank and Slider Mechanism

In this paper, a smart crank and slider mechanism is analyzed mostly from a dynamic view. By means of dynamic explicit finite element method, 3D nonlinear structure is simulated. It is proved that the mechanism can effectively accomplish smart movement prescribed. And in order to ensure reciprocal movement with higher frequency, measures should be taken to avoid over heating of parts. Compared with internal energy, kinetic energy of total rigid body is dominating, and Y direction equivalent rigid velocity is much higher than X direction velocity. Equivalent rigid velocity of all parts is consistent with respective movement condition. For both energy and velocity, slider effect is dominating. Three direction equivalent inertia force oscillates. Force amplitude in Y -direction is comparitively the greatest.     

Maritime accident investigation and temporal determinants of maritime accidents: A case study

This paper presents the results of an investigation into temporal determinants of maritime accidents based on a data-set obtained from the proceedings of formal inquiries in the former German Democratic Republic (GDR). The results show that there is no statistically significant outcome between the probability for an accident and the time of watch. Thus the results do not confirm previous studies, which reported significant time of day effects.The outcome of this study indicates that marine inquiries can provide useful data for an analysis of underlying causes of maritime accidents. It is suggested that accident inquiries should be extended into the area of watch systems employed and should record the hours of work and of rest of the officers on the watch involved in a maritime accident.