EPB释放时间偏长问题研究

EPB是实现车辆自动驻车、释放等功能的部件。其作用是防止车辆在平路或者坡道上溜车。相对普通手驻车制动更加智能、高效。左右EPB卡钳电机分别执行驻车、释放等功能,其结构复杂,同时驻车、释放等功能由软件控制,其涉及驻车释放的一致性等问题。本文以某车型投放市场初期产生的释放时间偏长问题,通过对软件和结构硬件进行了深入研究,分析出卡钳密封圈尺寸超设计以及软件的释放时阈值的设置不合理是导致上述问题的根本原理。通过风险评估、技术改进等步骤,彻底解决了该问题,为后续产品开发提供了技术支撑。     

高速铁路动态定价与票额分配协同优化研究

目前我国高速铁路票价制定还比较缺乏灵活的市场化机制,严重影响铁路运输企业收益和服务水平的提高。基于高速铁路旅客出行规律和收益管理策略,研究高速铁路动态定价与票额分配协同优化方法。在分析旅客出行价格需求弹性的基础上,构建基于Logit模型的客流弹性函数,考虑临近发车客票不涨价和运输能力等约束,建立以期望客票总收入最大化为目标的优化模型,设计一种基于超分方程的分步算法,求解不同时段下不同列车的最优票价与票额分配方案。以京沪高速铁路为例进行计算和分析,与固定费率票价相比,动态票价策略能保证服务水平,系统总客流需求下降0.73%,企业客票总收益提高4.95%。     

S^2 BHCA Multiple AUVs cooperation oriented control architecture

Oceanographic survey, or other similar applications should be the applications of multiple AUVs. In this paper, the skill ＆ simulation based hybrid control architecture （S^2BHCA） as the controller＇s design reference was proposed. It is a multi-robot cooperation oriented intelligent control architecture based on hybrid ideas. The S^2BHCA attempts to incorporate the virtues of the reactive controller and of the deliberative controller by introducing the concept of the ＂skill＂. The additional online task simulation ability for cooperation is supported, too. As an application, a multiple AUV control system was developed with three ＂skills＂ for the MCM mission including two different cooperative tasks. The simulation and the sea trials show that simple task expression, fast reaction and better cooperation support can be achieved by realizing the AUV controller based on the S^2BHCA.     

WindML下汉字字体引擎的实现

详细分析了WindML下字体引擎的组织结构和文本显示的实现机制，并据此给出一种汉字字体引擎的实现方法。     

PERFORMANCE ANALYSIS OF SECOND-ORDER STATISTICS FOR CYCLOSTATIONARY SIGNALS

Introduction　　 In natural and man- made signals,there existwidely a special kind of non- stationary signal,forwhich the statistics,correlation function or higher-order statistics,vary not only with time but alsowith multiple incommensurate periods ( periodicallyor polyperiodically) .The random signal,such ascommunication,radar,telemetry,sonar,etc andthe data thatsubjectto seasonal and rhythmic vari-ations,such as hydrologic,oceanic,climatic,ex-hibit periodically the time- varying characteris…     

丰田汽车的辉煌成就探因

1997年东南亚金融危机以来,对该地区汽车工业带来了相当的影响,日本也未能幸免.由于日本国内汽车市场疲软,汽车销量下跌,多数企业经济效益滑坡,一些厂家财政出现赤字,生存受到危胁.     

A second order volume of fluid （VOF） scheme for numerical simulation of 2-D breaking waves

Among all environmental forces acting on ocean structures and marine vessels, those resulting from wave impacts are likely to yield the highest loads. Being highly nonlinear, transient and complex, a theoretical analysis of their impact would be impossible without numerical simulations. In this paper, a pressure-split two-stage numerical algorithm is proposed based on Volume Of Fluid (VOF) methodology. The algorithm is characterized by introduction of two pressures at each half and full cycle time step, and thus it is a second-order accurate algorithm in time. A simplified second-order Godunov-type solver is used for the continuity equations. The method is applied to simulation of breaking waves in a 2-D water tank, and a qualitative comparison with experimental photo observations is made. Quite consistent results are observed between simulations and experiments. Commercially available software and Boundary Integral Method (BIM) have also been used to simulate the same problem. The results from present code and BIM are in good agreement with respect to breaking location and timing, while the results obtained from the commercial software which is only first-order accurate in time has clearly showed a temporal and spatial lag, verifying the need to use a higher order numerical scheme.     

Experimental study on the width of the turbulent area around bridge pier

At present, the method of calculating the turbulent flow width around the bridge pier is not given in the "Standard for Inland River Navigation" (GB50139-2004) in China, and the bridge designer usually increases the bridge span in order to ensure the navigation safety, which increases both of the structural design difficulty and the project investments. Therefore, it is extremely essential to give a research on the turbulent flow width around the bridge pier. Through the experiments of the fixed bed and the mobile bed, the factors influencing the turbulent flow width around the bridge pier have been analyzed, such as the approaching flow speed, the water depth, the angles between the bridge pier and the flow direction, the sizes of bridge pier, the shapes of the bridge pier, and the scouring around the bridge pier, etc. Through applying the dimension analytic method to the measured data, the formula of calculating the turbulent flow width around the bridge pier is then inferred.     

川江上游船型比选思路探讨

本文在分析川江上游运输船舶现状的基础上,提出船型比选的原则,并阐述了对现有船型比选的思路和方法,最后介绍了采用VB开发的计算机比选程序。     

Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)