超声冲击处理对高强钢焊接接头残余应力影响的数值模拟

超声冲击处理(UIT)是一种有效的焊后改善焊接接头疲劳性能的工艺措施,其借助机械撞击和超声振动的共同作用,使焊趾表面产生塑性变形从而引入有益的压缩残余应力。为评价UIT技术对焊接接头残余应力的影响,该文提出了一套新的数值分析方法,包括焊接数值模拟及随后的超声冲击处理过程的动态弹塑性有限元分析。在有限元模型中考虑了实际的工艺参数和超声促成的材料软化效应。以船用高强钢AH36非承载十字焊接接头为研究对象,将预测的超声冲击处理前后的残余应力分布与实验结果进行对比,两者有较好的吻合。在此基础上,探讨了静态预载荷对超声冲击处理态残余应力再分布的影响。     

城轨交通新选择——小型单轨系统

1概况 首个城市跨座式单轨系统--东京单轨,于1964年投入运营.跨座式单轨系统利用普通公路之上的空间,因此不会干扰日常的交通;而带橡胶轮的独轨车辆具有环保,低噪声和低振动的特点.     

An experimental analysis of intelligibility and efficiency of in-vehicle route guidance system displays

This study focuses on the user-interface of the route guidance system with an electronic map display. The ultimate goal of the study is to aid in designing electronic map displays that can deliver information to the user most efficiently and expeditiously with minimum confusion. To evaluate the efficiency and understandability of a map display, laboratory experiments were designed and conducted in this study. In the experiments the subjects were presented with electronic map displays of different attributes and performed a set of tasks. Their understanding of the information contents was measured based on the outcomes of the tasks, and subjective ratings of the ease of using the maps were obtained. Using the experimental data obtained, a structural equations model system is developed to explain the understandability of a map display in terms of the subject’s attributes and the characteristics of the map display. The experimental procedure and the modeling results are presented in this paper.     

Fatigue crack propagation and computational remaining life assessment of ship structures

The fitness for serviceability of structural members of marine structures in which fatigue cracks might be found during in-service inspection is investigated in order to prevent instantaneous failures of ships, as well as a loss of serviceability such as the oil- and/or watertightness of critical compartments. The essential features of fatigue crack propagation and the remaining life assessment are discussed in the first part of the paper, where the effects of weldment, complicated stress distributions including stress biaxialities at three-dimensional structural joints, structural redundancy, and crack curving are found to be of primary importance. The second part of the paper contains a discussion of an advanced numerical simulation method for the remaining life assessment, in which the above-mentioned effects of fatigue crack propagation are taken into account. The simulated crack paths and the fatigue crack propagation lives are found to be in fairly good agreement with the experimental results.     

The effects of critical peak pricing for electricity demand management on home-based trip generation

This paper examines electricity critical peak pricing (CPP) as a measure for controlling electricity demand at critical peak times. This pricing scheme is designed to facilitate energy conservation not only inside but also outside the home. For this study, we surveyed consumer propensity to leave the home under CPP schemes and analyzed the impact of CPP on consumer cost. The results indicated that higher prices induce a higher rate of going out, while residential conditions such as population density and access to public transportation have a relatively small impact on leaving the home and average energy conservation. However, this is not always the case for aged households with limited mobility; residential conditions have a substantial effect on this segment of the population. Combined with a reduced ability to go out, electricity pricing has a greater negative impact on aged people. These results imply that improving accessibility through transportation development and urban compaction is an effective means of saving electricity alleviating the negative impact of CPP on the aged society of the future.     

Analysis of the accident of the MVNakhodka. Part 2. Estimation of structural strength

In the early morning of January 2, 1997, a Russian tanker, the MVNakhodka, broke in two in the Sea of Japan. The fore part of the vessel drifted and was stranded on the coast of Japan, and the aft part sank. The coast of Japan was seriously polluted by spilled heavy oil. Following this disaster, the Japanese Government established a Committee for the Investigation of the Causes of the Casualty of theNakhodka. This paper deals with the structural strength of MVNakhodka at the time of the accident. First the structural characteristics of theNakhodka are described, and the reduction in thickness of the structural members are estimated based on the data measured on the fore part of the vessel which drifted ashose. Then the ultimate longitudinal strength of the hull girder at the time of the accident is evaluated by applying Smith's method, and the possibility of break-up collapse due to excess loads is discussed. The mechanism of fracture at the bottom plate is also discussed based on the observed fracture surfuce of the cross section. Finally an FEM (finite element method) simulation of the break-up of the hull girder is performed. It is shown that buckling/plastic collapse took place at the deck plate near Fr.153, which was followed by the successive buckling collapse of the side shell plate of the hull girder. Right after the collapse of the deck structure, the bottom plate fractured just in front of the transverse bulkhead at Fr.153. This article is based on an article that appeared in Japanese in the Journal of the Society of Naval Architects of Japan, vol. 183 (1998).     

On the water impact and elastic response of a flat plate at small impact angles

It is well known that Wagner's theory for the impact between a flat body and a water surface cannot be applied to very small impact angles because of the effects of the trapped air. We focus our attention on the impact problem with a small impact angle, which has not been studied in detail owing to theoretical and experimental difficulties. In order to investigate the transitional impact behavior from a trapped-air impact to a Wagner-type impact, we carried out precise pressure and strain measurements by dropping a plate and increasing the impact angle, β, from 0° to 4° by increments of 0.5°. Based on the experimental results, the time histories of the measured pressures were identified as belonging to three patterns: the Wagner type, the trapped-air type, and the intermediate type. During the transitional impact process, the Wagner-type pattern was observed near the keel at the beginning of the impact, with the trapped-air pattern toward the edge of the plate. The Wagner-type pressure pattern dominated with increasing impact angle. Although high peak pressures appeared in the transitional impact process, the maximum strains measured in the plate were not so sensitive to the impact angle. It was found that the structural response can be estimated by using the average pressure at impact, which leads to a new design approach for small impact angles.     

Strength and deformability of corroded steel plates under quasi-static tensile load

The objective of this study was to estimate the strength and deformability of corroded steel plates under quasi-static uniaxial tension. In order to accurately simulate this problem, we first estimated the true stress–strain relationship of a flat steel plate by introducing a vision sensor system to the deformation measurements in tensile tests. The measured true stress–stain relationship was then applied to a series of nonlinear implicit three-dimensional finite element analyses using commercial code LS-DYNA. The strength and deformability of steel plates with various pit sizes, degrees of pitting intensity, and general corrosion were estimated both experimentally and numerically. The failure strain in relation to the finite element mesh size used in the analyses was clarified. Two different steels having yield ratios of 0.657 and 0.841 were prepared to examine the material effects on corrosion damage. The strength and deformability did not show a clear dependence on the yield ratios of the present two materials, whereas a clear dependence was shown with respect to the surface configuration such as the minimum cross-sectional area of the specimens, the maximum depth of the pit cusp from the mean corrosion diminution level, and pitting patterns. Empirical formulae for the reduction of deformability and the reduction of energy absorption of pitted plates were proposed which may be useful in strength assessment when examining the structural integrity of aged corroded structures.     

Motorcycle-based adolescents’ travel behaviour during the school morning commute and the effect of intra-household interaction on departure time and mode choice

We hypothesise that intra-household interaction influences home departure time and mode choice for the morning commute. In Indonesia, over 71% of vehicles on the road are motorcycles. This fact increases the significance of household interaction in influencing transport mode choice since the simplicity of the motorcycle allows a great degree of versatility in regard to multiple family member transport. To emphasise this point, our study focuses on the unique travel behaviour of adolescents during the school morning commute which, due to the use of the motorcycle, is a combination of the travel behaviour of accompanied children and escorting adults. Our study discovers that adolescents are likely to shift their school arrival time very early or close to the designated starting time in relation to motorcycle-based parental escort to school. In regard to mode choice, adolescent students prefer to be escorted by motorcycle rather than take public transport.     

Multi-scale modeling of fatigue crack propagation applied to random sequence of clustered loading

Fatigue crack propagation in marine structures is obviously governed by mechanics of the considerably different four levels of multi-scale problems. Problems of structural response to environmental loads have length scale of several hundred meters, whereas possible detectable size of cracks from initial defects in a weld is of the order of millimeters. Once a fatigue crack initiates, crack tip plasticity is of the order of several grain sizes, while the resulting fatigue crack growth in each load cycle is of the order of nanometers. In our previous work, the first author and their associates have developed the so-called CP-System, which can treat the first two multi-level problems as an integrated system. Furthermore, we have incorporated the third level of mechanics by using the stress intensity range corresponding to the repeated tensile plastic deformation ahead of the crack tip. In the present paper, we shall discuss a more rational integral equation-based formulation in order to integrate the third and fourth levels of micro-mechanics to the first two levels of continuum mechanics.The method is then applied to fatigue crack propagation under the effects of random sequence of clustered loading. As an example of the random sequence of clustered load, we shall use the so-called “storm model”. In the crack propagation simulation, we have to take into account of the plastic wake on the crack surfaces, whose thicknesses are influenced by the material parameters involved in the crack growth model. These parameters are first identified by the fatigue tests under combined constant and random loading using a CT specimen. Then, fatigue crack growth is investigated by numerical simulation and fatigue tests for various random sequences of clustered loading. The experimental and numerical results agree quite well with each other, and fatigue crack propagation is found to be considerably retarded under random sequence loading, so that the conventional equivalent stress approach may provide rather conservative results to the real seaway loading.