基于仿真的沿海港口甩挂场站布局方案比选

甩挂运输以其高效低碳的特点正得到迅速发展。针对当前国内甩挂场站研究中功能布局、建设规模等方面的量化研究相对不足,利用微观仿真软件VISSIM建立沿海港口甩挂运输场站交通仿真模型,研究甩挂车辆在场站内运行状况,评价场站内部功能布局方案,并以某港口为例,验证该模型的有效性。     

非港湾式停靠站对路段通行能力的影响研究

分析了路段上非港湾公交车站对路段通行能力有影响的6个因素,在实地调查的基础上,运用VISSIM进行试验仿真,得到大量数据,定量分析了各影响因素对路段通行能力的影响。建立神经网络模型对仿真数据进行分析,得到一组权值和偏差矩阵数据,通过该数据以及神经网络模型,可以在不同条件下,得到非港湾停靠站对路段通行能力的影响系数。     

基于VISSIM仿真的主干道支路接入控制方式研究

选取VISSIM交通仿真软件,根据实测的主干道交通数据,对软件的交通模型参数进行标定及验证,在此条件下以主路延误及支路延误为控制指标,以双向六车道中央分隔带主干道为对象,可得出在不同流量条件下支路接入的最佳控制方式。     

隧道与互通出口小净距路段换道可靠性研究

为分析高速公路隧道与互通出口小净距路段在不同交通流状况下的车辆驶出概率,提出了基于交通仿真的安全换道概率模型。首先,采用VISSIM标定仿真模型并进行正交试验,获取小净距路段在不同净距长度、交通量、驶出比例、大型车比例下的交通数据,在此基础上确定瞬时交通流密度及相应车流平均速度的计算方法,构建相应的分布模型,通过K均值聚类算法研究不同速度下的瞬时交通流密度大小和出现概率;同时引入可靠度方法并利用微分法来构建车辆安全换道概率模型,综合考虑车速、车流密度、目标车道临界可插入间隙等因素的不确定性,应用蒙特卡罗仿真法搭建求解概率模型的算法,并通过MATLAB对模型进行求解;针对分流车初始位置的不同,分别得到了不同交通量、大型车比例、净距长度下的换道驶出成功率,进而研究不同交通流状况组合下的净距长度。结果表明：交通量、大型车比例、净距长度对净距路段内侧车道车辆换道驶出成功率有显著性影响,研究结果可为规范的进一步完善提供参考。     

基于仿真的高速公路混合收费站通行能力确定方法

高速公路收费站通行能力直接决定了高速公路的通行能力,在总体上制约着公路的交通运行状况。随着电子收费系统(ETC)技术的推广和应用,大量人工收费车道和ETC收费车道并存的混合收费站随之出现,合理地确定混合收费站通行能力是收费系统设计的重要问题。分析了高速公路混合收费站中人工收费和ETC收费的交通流特性,结合现场实际调查数据标定参数并建立了VISSIM仿真模型,获得了收费站人工收费车道和ETC收费车道数在不同比例的情况下收费站的综合通行能力,并给出了收费站通行能力最优时,ETC交通量占总交通量的最佳比例。此外,研究还进行了收费站综合服务能力仿真研究,给出了在输入交通量一定的情况下,ETC交通量分别占10%、30%、50%的情况下收费站的服务能力。研究为混合收费站的合理通行能力确定,以及ETC车道开设方法提供了重要的参考。     

Study of Probe Sample Size Model in Probe Vehicle Technology

In this paper, market penetration of a probe vehicle for real-time traffic data collection is discussed. A new comprehensive probe sample size model that satisfies the need of traffic flow parameter estimation and traffic network coverage is established, in which many factors like location error, probe ‘report’ transmission interval, probe data analysis interval, traffic flow density, link length, and road type are included. Based on this model, this paper proves the relationship between market penetration of the probe vehicle and other indexes, when probe data is used for link average speed estimation based on VISSIM simulation. The simulation result shows that the sample size model can provide effective probe information to accomplish the estimation of link speed.     

基于VISSIM仿真的间断流设施交织区组织研究

将快速路和城市常规道路不合理衔接造成的城市道路拥堵问题作为一种典型的间断流设施交织区问题,研究其拥堵机理,提出＂以时间换空间＂的理念,采用路段信号控制方法来实现2个交通流在时间上的分离,减少交织的优化方案,最后利用VISSIM仿真软件对其效果进行验证,并找出其适用范围。     

单路口感应信号控制优化设计及其仿真

为有效解决平面交叉口的交通信号控制问题,提高交叉口交通信号控制效率,使交叉口具有最高的通行能力和最小的延误,就必须综合利用不同检测信息。文章借助于VISSIM软件,提出了一种新的感应信号控制方法．并对单个路口进行感应信号控制优化设计,最后运用VISSIM软件对所设计的感应信号控制进行了仿真分析。     

Modeling delay at signalized intersections with channelized right‐turn lanes considering the impact of blockage

This paper presents a probabilistic delay model for signalized intersections with right‐turn channelization lanes considering the possibility of blockage. Right‐turn channelization is used to improve the capacity and to reduce delay at busy intersections with a lot of right‐turns. However, under heavy traffic conditions the through vehicles will likely block the channelization entrance that accrues delay to right‐turn vehicles. If the right‐turn channelization gets blocked frequently, its advantage in reducing the intersection delay is neglected and as a result the channelization lane becomes inefficient and redundant. The Highway Capacity Manual (HCM) neglects the blockage effect, which may be a reason for low efficiency during peak hours. More importantly, using HCM or other standard traffic control methods without considering the blockage effects would lead to underestimation of the delay. To overcome this issue, the authors proposed delay models by taking into account both deterministic and random aspects of vehicles arrival patterns at signalized intersections. The proposed delay model was validated through VISSIM, a microscopic simulation model. The results showed that the proposed model is very precise and accurately estimates the delay. In addition, it was found that the length of short‐lane section and proportion of right‐turn and through traffic significantly influence the approach delay. For operational purposes, the authors provided a step‐by‐step delay calculation process and presented approach delay estimates for different sets of traffic volumes, signal settings, and short‐lane section lengths. The delay estimates would be useful in evaluating adequacy of the current lengths, identifying the options of extending the short‐lane section length, or changing signal timing to reduce the likelihood of blockage. Copyright © 2016 John Wiley & Sons, Ltd.     

基于微观仿真的交叉口车辆能耗与排放研究

为了更加准确地模拟交叉口机动车能耗、排放情况,结合使用微观仿真模型VISSIM与微观能耗、排放模型PERE,构建能够模拟车辆瞬时运行状况与能耗、尾气排放关系的微观模拟平台。选取上海市西藏北路—海宁路交叉口进行实例仿真,通过设置交叉口锯齿形公交优先进口道及改变信号周期,来定量分析对交叉口车辆能耗和排放的影响。结果表明,设置公交专用进口道可使公交车辆总体排放明显下降,但是社会车辆的能耗和排放有所增加;对车均延误、停车次数、能耗与排放都合适的最佳信号周期范围是80～120s。