基于无人机的高层住宅最后“一百米”配送优化

针对城市高层住宅顾客对上门配送服务的需求，借助无人机停放平台，考虑包裹异质性以及无人机在不同配送阶段的精确能耗，构建以无人机飞行成本和能耗成本最小为目标，以无人机容量、电池组容量等为约束的高层住宅无人机上门配送模型，解决“垂直位置最后一百米配送”问题。基于此模型，设计带变邻域下降(VND)搜索的混合蚁群算法(HACO-VND)，引入4个算子进行变邻域下降搜索，为了提高算法的求解性能，提出两种局部搜索算子组合，根据顾客点数量使用不同的算子组合。实验结果表明，HACO-VND算法较CPLEX在求解精度与求解时间方面更优，特别是在大中型算例中表现出较佳性能。参数分析表明，高层住宅楼层数越多，无人机单次 飞行的能耗利用率越大，无人机容量与电池组容量共同对配送方案产生影响。为以后无人机送货上门服务方面的研究提供参考和思路。     

美国海军核潜艇舱室大气监测主分析仪器发展述评

舱室大气监测系统是核潜艇的重要组成部分之一,其运行效能直接影响舱室设备可靠运行、人员安全和健康。本文对美国核潜艇的大气监测技术的研究和应用情况进行了详细论述,重点介绍了已装艇应用近半个世纪的中央大气监测系统(Central Atmosphere Monitoring System,CAMS),以及近年来的最新技术探索。当前大气监测技术仍然难以完全满足核潜艇舱室大气监测需求,迫切需要结合最新科技成果,不断探索以提升监测仪器性能。     

Costs of air pollutants from shipping: a meta-regression analysis

ABSTRACT

This study estimated the external cost of air pollution from shipping by means of a meta-regression analysis, which has not been made before. Three pollutants, which were included in most of the primary studies, were considered: nitrogen oxides (NO_x), sulphur dioxides (SO₂) and particulate matters with a diameter of max 2.5 micrometres (PM_2.5). All primary studies included damages of health and a majority added impacts on agriculture and estimated the cost of air pollutants by transferring cost estimates from studies on costs of air emissions from transports in Europe. Different regression models and estimators were used and robust results were found of statistically significant emission elasticities of below one, i.e. total external costs increase by less than 1% when emissions increase by 1%. There was a small variation between the pollutants, with the highest elasticity for PM_2.5 and lowest for NO_x. Calculations of the marginal external cost of the pollutants showed the same pattern, with this cost being approximately six times higher for PM_2.5 than for the other pollutants. Common to all pollutants was that the marginal external cost decreases when emission increases. Another robust result was a significant increase in the cost of studies published in journals compared with other publication outlets. These findings point out some caution when transferring constant external unit cost of air pollutant from shipping, which is much applied in the literature, and the cost functions estimated in this study could thus provide a complementary transfer mechanism.     

ZPW-2000A调谐区SVA阻抗值对调谐区品质因数的影响分析

ZPW-2000A无绝缘轨道电路调谐区由1型调谐单元、钢轨、空心线圈、2型调谐单元构成,本区段所连接的调谐单元显容性,钢轨、空心线圈和邻区段连接的调谐单元呈感性,这两部分形成并联谐振。分析普速铁路ZPW-2000A空心线圈SVA阻抗值对整体谐振电路的影响,提出调谐区小轨道电路品质因数的计算方法,通过提高调谐区品质因数,可以改善钢轨传输的稳定性,增强调谐区选频性能。     

A new solution for two-bag air suspension system with leaf spring for heavy-duty vehicle

The design problem of a two-bag air suspension system for heavy-duty vehicles is formulated as a two-level (suspension system level and component level) optimization problem. At the suspension system level, optimal stiffness matrix of leaf spring, characteristics of damper and upper rod layout are determined by solving a multi-objective constrained optimization problem with response surface. At the component level, shape and thickness of the leaf spring are formed using cubic-spline curves to make the stiffness matrix as close to the target values cascaded from suspension system level as possible. Simulations using a vehicle model described by multi-body model and FEM of the novel leaf spring validate the suspension system thus derived.     

含酚废水处理工艺综述

含酚废水是一种常见的工业废水，本文分别阐述了萃取、SBR、湿式氧化几种典型工艺处理含酚废水的试验情况，归纳出不同含酚废水合适的处理工艺。     

加速顶的动力系统研究与设计（续二）

TDJ加速顶主要是应用在铁路编组站的有能源的调速设备，其动力源是压缩空气，由空压机站将压缩空气输送到加速顶的管路及其附属设备和部件，组成加速顶动力系统，现在比较详细地介绍该动力系统的研究和工程设计的有关问题。     

金属橡胶液体复合弹簧的发展和应用

介绍了橡胶减振器的产生和发展过程，以及金属橡胶液体复合弹簧的发展与应用，着重介绍了铁路车辆用的金属橡胶液体复合弹簧的性能，最后简述了这种弹簧今后的发展情况。     

电机悬挂方式对LIM地铁系统动力特性的影响研究

研究目的：研究直线电机地铁在不同电机悬挂方式下的气隙变化规律及车辆、轨道的动力响应特性，并将二者进行比较。研究方法：应用车辆轨道耦合动力学理论，分别建立不同悬挂方式下的系统模型并编制相应的仿真程序，通过在轨道局部加入谐波型余弦不平顺激励对系统的动力特性进行分析。研究结果：2种悬挂方式对系统的各向加速度和轮轨力的影响差别较小，而气隙变化呈现明显不同的规律。研究结论：直线电机采用架悬式悬挂时，要严格控制幅值大于5．5mm的长波不平顺，防止电机和反力板之问的刮蹭；而当采用抱轴式悬挂时，要注意控制大幅值的短波不平顺出现，防止气隙过大，影响电机效率。     

转K2型转向架弹簧载荷识别及其对弹簧寿命影响的研究

用试验的方法得到在垂直载荷作用下弹簧45°方向应力和最大主应力之间的差异,用有限元法计算了弹簧在横向、垂向加载时的载荷识别系数。根据线路实测动应力识别出转K2型转向架弹簧在运用工况下的2种载荷。最后根据载荷计算出弹簧的应力,利用疲劳损伤模型计算出损伤,得出了2种载荷对疲劳寿命的影响。