A signal decomposition method based on repeated extraction of maximum energy component for offshore structures

Contrary to most signal decomposition methods that usually decompose an original signal into a series of components simultaneously, a novel approach based on repeated extraction of Maximum Energy Component (MEC) is proposed. The approach starts from determination of the MEC referring to the estimated Power Spectral Density (PSD) function, and then represents the MEC by employing an exponential function to fit the original signal. By defining a stopping criterion based on two adjacent estimated PSDs, each MEC can be accurately extracted with an improved performance throughout the entire signal decomposition. To verify the proposed method, a single degree-of-freedom system subject to harmonic loads has been examined. Numerical results show that the analytical response can not only be decomposed into four MECs corresponding to the excitation and the system, respectively, but also provide an accurate estimation of natural frequency and damping ratio of the system. Meanwhile, by observing results from the Ensemble Empirical Mode Decomposition (EEMD), Variational Mode Decomposition (VMD) and Prony based on state-space model (Prony-SS), an improved decomposition accuracy has been achieved from the proposed approach. Furthermore, experimental data from the Norwegian Deepwater Programme and two sets of field-test data from one fixed offshore platform and an offshore wind turbine have been used to demonstrate the correctness of the developed signal decomposition method. It is noted that divergence in results by Prony-SS can be observed when a very large model order is used, while the proposed method provides the better decomposition and reconstruction of signals.     

基于经验模式分解的钢轨波浪弯曲不平顺提取方法

钢轨波浪弯曲不平顺隐藏在轨道不平顺中。采用小波分析和经验模式分解相结合的方法,对钢轨波浪弯曲不平顺进行识别和提取分析。利用对称双正交小波对轨检车监测到的车体垂向加速度响应和高低轨道不平顺信号进行小波变换,滤除波长1 m以下成分后,基本可以保证用经验模式分解得到的第1个固有模态函数包含全部钢轨弯曲不平顺信息。对提取得到的钢轨波浪弯曲不平顺的分析表明,不同钢轨上存在的弯曲不平顺不同,钢轨存在的波浪弯曲不平顺是波长在3 m附近变化的准周期不平顺;钢轨波浪弯曲不平顺是引起车体颤振的原因。建议在提速线路和客运专线上应限制波浪弯曲钢轨上道。     

尺度适应性二代小波的图像去噪方法

根据二代小波变换的基本理论和特点,研究二代小波对图像去噪的效果。提出基于二代小波的尺度适应性分解算法,并使用改进阈值函数进行阈值分析后再对噪声图像进行去噪处理。实验结果证明,使用尺度适应性二代小波对图像去噪比其他方法具有更好的效果,去噪后的图像信噪比大大提高。     

客车主要噪声源识别的试验研究

基于偏奇异值分析法识别噪声源的基本原理，采用了近场声压测量法，同步采集15个传感器的振动与声压信号，识别出客车车外噪声的主要噪声源，分析出各噪声源对车外噪声的贡献并做出降低车外噪声的预测分析。所采用的试验与分析方法具有计算量小、声源定位准确的特点，并且可以准确预测零部件的改进对车外噪声的影响。试验研究和实车应用表明，这种方法可以适用于复杂的工程实际。     

Development and calibration of a long-distance passenger traffic assignment model

This paper studies the assignment of long-distance passenger traffic on a highway corridor network. First, we propose a traditional model for the long-distance traffic assignment considering interactions with local commuter traffic. It addresses the effect of local networks on highway corridors. An iterative algorithm is developed to solve for the exact solution. Then, to address the potential computational issues that arise therein, a decomposition method is proposed by introducing a new concept of corridor elasticity. An assignment procedure for long-distance passenger traffic is developed accordingly. Numerical tests show that the proposed decomposition method makes significant improvements in computational performance at a small loss of optimality. This decomposition method well approximates the exact assignment from the traditional formulation, especially when the highway corridors are near-saturation. The proposed decomposition method appears practical for application.     

Connectivity analysis of the global shipping network by eigenvalue decomposition

ABSTRACT

Maritime shipping necessitates flexible and cost-effective port access worldwide through the global shipping network. This paper presents an efficient method to identify major port communities, and analyses the network connectivity of the global shipping network based on community structure. The global shipping network is represented by a signless Laplacian matrix which can be decomposed to generate its eigenvectors and corresponding eigenvalues. The largest gaps between the eigenvalues were then used to determine the optimal number of communities within the network. The eigenvalue decomposition method offers the advantage of detecting port communities without relying on a priori assumption about the number of communities and the size of each community. By applying this method to a dataset collected from seven world leading liner shipping companies, we found that the ports are clustered into three communities in the global container shipping network, which is consistent with the major container trade routes. The sparse linkages between port communities indicate where access is relatively poor.     

How to Use Driving Simulators Properly: Impacts of Human Sensory and Perceptual Capabilities on Visual Fidelity

Fidelity has been a critical concern of researchers throughout the history of driving simulation. Understanding the limits of a driving simulation system is a prerequisite for conducting valid driving simulator studies. This paper proposes a novel and interdisciplinary methodology to ensure validity of studies using driving simulators (primarily for traffic control devices and other object detection tasks) based on the visual limits of human sensory and perceptual capabilities, and the characteristics of raster graphics. This methodology decomposes the perceptual issues of a stimulus into perceptual issues of different visual properties like luminance, hue, or text of the stimulus. By systematically analyzing the mechanism of human vision in driving simulators, the perceptual principle is proposed to ensure perceivable visual details in human-in-the-loop driving simulation systems. Additionally, the graphic principle is proposed to ensure perceivable features of a target object in the virtual driving environment. Both principles quantify the minimum requirements of visual fidelity with two measurements: angular resolution and matrix dimensions. The enriched results from existing pertinent studies are analyzed and organized to yield support of both principles. This research focuses on the minimum requirements for four factors; namely the visual acuity of drivers, the specifications of display systems, the configurations of graphics systems, and the design of virtual scenarios, as well as the relationship among all these factors to assess the visual fidelity in driving simulation systems. Within the realm of human perception, this work can provide criteria for proper design, calibration, and usage of driving simulators.     

Dynamic traffic metering in urban street networks: Formulation and solution algorithm

Traffic metering offers great potential to reduce congestion and enhance network performance in oversaturated urban street networks. This paper presents an optimization program for dynamic traffic metering in urban street networks based on the Cell Transmission Model (CTM). We have formulated the problem as a Mixed-Integer Linear Program (MILP) capable of metering traffic at network gates with given signal timing parameters at signalized intersections. Due to the complexities of the MILP model, we have developed a novel and efficient solution approach that solves the problem by converting the MILP to a linear program and several CTM simulation runs. The solution algorithm is applied to two case studies under different conditions. The proposed solution technique finds solutions that have a maximum gap of 1% of the true optimal solution and guarantee the maximum throughput by keeping some vehicles at network gates and only allowing enough vehicles to enter the network to prevent gridlocks. This is confirmed by comparing the case studies with and without traffic metering. The results in an adapted real-world case study network show that traffic metering can increase network throughput by 4.9–38.9% and enhance network performance.     

On the variance of recurrent traffic flow for statistical traffic assignment

This paper generalizes and extends classical traffic assignment models to characterize the statistical features of Origin-Destination (O-D) demands, link/path flow and link/path costs, all of which vary from day to day. The generalized statistical traffic assignment (GESTA) model has a clear multi-level variance structure. Flow variance is analytically decomposed into three sources, O-D demands, route choices and measurement errors. Consequently, optimal decisions on roadway design, maintenance, operations and planning can be made using estimated probability distributions of link/path flow and system performance. The statistical equilibrium in GESTA is mathematically defined. Its multi-level statistical structure well fits large-scale data mining techniques. The embedded route choice model is consistent with the settings of O-D demands considering link costs that vary from day to day. We propose a Method of Successive Averages (MSA) based solution algorithm to solve for GESTA. Its convergence and computational complexity are analyzed. Three example networks including a large-scale network are solved to provide insights for decision making and to demonstrate computational efficiency.     

基于 EM D桘BPN 方法的高速铁路短期客流预测

高速铁路短期客流预测是铁路运输系统的重要组成部分。无论是对列车开行方案的制定,还是对如何采取正确的营销策略,都具有重大的现实意义。通过混合经验模态分解方法和神经网络方法相结合的EMD-BPN方法来预测高速铁路短期客流量。组合方法主要分为三步：首先,使用经验模态分解方法将客流时间序列分解;其次,将IM Fs作为BP神经网络的输入;最后,应用神经网络对客流量做出预测。数值实例表明,该方法对于高速铁路短期客流预测在精度和稳定性上都有良好的表现。