半约束模型试验--一种验证随浪和斜浪中波浪力计算的手段

本文采用半约束模型试验技术，对一条高速船在规则波中随浪和斜浪工况进行了流体动力系列试验，以探讨航运的安全性，验证作用于船体上波浪力的估算方法。对每次试验，以波动方程的形式采用数值估算方法确定环绕船模的波浪运动的时间历程。并用同样的方法从测量数据中提取垂荡和纵摇与模型测量运动，一阶波导纵荡、横荡作用力和首摇力矩。因此合理比较理论计算的波浪力与力矩的时间历程成为可能。这表明SSPA海事动力学的研究所(MDL)模型试验设施可以提供高质量的测量，与所述计算方法结合起来可用来验证理论计算和建立半经验方法。     

汽车动力总成弯曲振动应力响应及其激励灵敏度分析

本文利用文献（５）建立的汽车动力总成弯曲有限元分析模型，计算分析离合器壳的动应力响应，并考察了动应力关于不平衡质量位置的灵敏度，对计算分析进行了实验验证。     

Time-domain coupled dynamic simulation for SFT-mooring-train interaction in waves and earthquakes

In this study, Submerged Floating Tunnel (SFT)-mooring-train coupled dynamics is solved in the time domain to investigate their dynamic and hydro-elastic interactions under wave and earthquake excitations. The SFT is modeled by the rod-FE (finite element) theory, and it is connected to mooring lines through dummy-connection-mass and linear and rotational springs. A 3D rigid-multi-body dynamic model is developed for train dynamics that consists of seven rigid bodies. The tunnel-train interaction is taken into consideration based on the wheel-rail correspondence assumption and the simplified Kalker linear creep theory. The developed computer simulation program is validated through comparisons with commercial programs and published results when possible. In the case of earthquake-induced dynamics of the coupled system, the effects of soil conditions, tunnel length, mooring interval, seismic-wave propagation, and seaquake are investigated. The magnitudes of the SFT downward motions induced by the moving train are small compared with the motions induced by earthquakes. The earthquake causes transient SFT responses especially at their lowest wet natural frequencies while high-frequency motions are induced by seaquake effect. Structural damping and seismic propagation play an important role in dynamic responses. The interaction of the tunnel and moving train is also evaluated for various train speeds in terms of the derailment and offload factors and riding-comfort criterion. For the given SFT and train designs, the offload factor and riding-comfort criterion can slightly exceed their limits at certain earthquake conditions with the speed as high as 70 m/s, which can be adjusted by reducing train speed.     

Design of tyre force excitation for tyre–road friction estimation

Knowledge of the current tyre–road friction coefficient is essential for future autonomous vehicles. The environmental conditions, and the tyre–road friction in particular, determine both the braking distance and the maximum cornering velocity and thus set the boundaries for the vehicle. Tyre–road friction is difficult to estimate during normal driving due to low levels of tyre force excitation. This problem can be solved by using active tyre force excitation. A torque is added to one or several wheels in the purpose of estimating the tyre–road friction coefficient. Active tyre force excitation provides the opportunity to design the tyre force excitation freely. This study investigates how the tyre force should be applied to minimise the error of the tyre–road friction estimate. The performance of different excitation strategies was found to be dependent on both tyre model choice and noise level. Furthermore, the advantage with using tyre models with more parameters decreased when noise was added to the force and slip ratio.     

声激励位置对简单导管声辐射特性的影响

文章借助NASTRAN软件,研究了单极子和偶极子声激励位置对简单刚性导管声辐射特性的影响。结果表明：（1）声源的径向位置对导管声辐射影响大,而轴向位置影响小,声源越靠近导管壁,辐射声功率峰值越大;（2）对于单极子而言,声源偏离径向中心位置时,声场的对称性取决于声源的频率值;（3）偶极子声源的方向对于导管声辐射特性的影响很大,必须加以考虑。     

一种紧凑的圆波导 TE01模式激励器

提出了一种基于微带结构的K波段圆波导 T E01模式的激励器。该激励器由四个微带贴片单元环形排列组成,通过设计合理的馈电网络实现TE01模式的辐射。运用 HFSS电磁仿真工具分析了该激励器在圆波导中对TE01模式电磁波的激励情况,并设计了一个微波传输损耗测量实验来验证T E01模式激励的有效性。     

潜水环境噪声数据库设计与开发

随着人类水下活动和实验行为的增多,越来越多的应用需要借助水声探测技术和水声通信技术,而在潜水环境中,环境噪声是以上技术的重要制约因素。因而,了解相应海域的环境噪声特性并建立环境噪声数据库,将有助于该海域的航运、测绘、通信等水声技术的应用与发展。本文针对以上需求,提出一种噪声建模方法,并根据该方法设计和研究相应的潜水环境噪声数据库。实验证明本文提出的方法具有一定的可行性。     

车身板件结构对汽车行车舒适性的影响

采用有限元与多体动力学相结合的方法分析了车身板件对振动的影响,改变车身板件局部结构,在对振动影响最大的前后地板上增加加强筋后对整车进行振动响应模拟,揭示了车身板件结构对汽车在路面激励下行车舒适性的影响。分析表明,在地板上增加加强筋可以极大地提高汽车的行车舒适性。     

基于环境激励测试值的润扬悬索桥动力特性分析

桥梁结构自振特性分析是进行地震反应分析及风振分析的理论基础,系统而深入的认识桥梁结构的动力特性是十分重要的。通过以润扬南汊悬索桥为研究对象,分析了对其实施环境随机测试的过程及结果,并根据润扬南汊悬索桥的设计图纸用大型商业有限元软件ANSYS建立了悬索桥的三维有限元模型,对成桥后的动力特性进行计算,并与实测值进行了对比分析,结果比较吻合,为该桥进一步动力分析提供了理论基础。     

非一致地震激励下大跨度斜拉桥空间响应分析

基于二维相干非一致激励功率谱模型，采用随机过程理论关于幅值、相位与功率谱的关系式，根据场地地震危险性评价和设计地震动参数合成人工地震波，考虑波动传播效应和多点激励效应，分析了某座跨长江的大跨度斜拉桥在地震激励下的空间非线性响应特性，计算了桥梁结构关键部位在地震力作用下的响应特性，并与一致激励下对应响应量进行比较。认为非一致激励下大跨斜拉桥关键部位的某些响应粱大幅增加。反应了进行非一致响应分析的必要性。