工程机械柴油机的匹配选择

为选择适应工程机械使用特点的柴油机，对工程机械配套的柴油机选型方式进行了概括分析，着重介绍在柴油机对比选择时的关键性能参数。说明了工程机械用柴油机抗过载能力的特殊要求，总结出通过性能参数和曲线的对比来匹配选择柴油机的方法。     

组合结构力法分析

本文应用集合概念，对组合结构作了形式化描述。通过矩阵分析，导出了力法方程的统一列式。给出了算法实施的流程框图和具体算例。     

大跨径混凝土桥梁施工挠度监测数据采集的自动化方案

针对大跨径预应力混凝土桥梁施工挠度监测中数据采集工作量大的特点。提出了利用PC-E500电子记簿采集外业数据。利用Delphi语言编程将数据导入Excel表格并从Excel表格中提取数据的自动化方案。     

Local joint flexibility of tubular X-joints stiffened with external ring or external plates

In the present paper, the Local Joint Flexibility (LJF) of the ring-stiffened X-joints and plate-stiffened X-joints under compressive load is investigated. In the first phase, a finite element (FE) model was generated and verified with the results of available experimental tests and equations. In the next phase, a set number of 234 FE models were created to evaluate the role of the external ring size (β_r and τ_r), the external plate size (β_p and τ_p), and the connection geometry (γ, τ, and β) on the LJF factor (f_LJF). In these FE models, the weld connecting the chord and brace members was generated. The results indicated that the f_LJF of a plate stiffened joint can be down to 76% of the f_LJF of the corresponding un-stiffened joint. Also, the effect of the ring size on the f_LJF was more than the effect of the plate size on the f_LJF, because of the stiffener position. Despite the notable effect of the ring and the plate on the f_LJF, there is not any study or formula on tubular connections stiffened with ring or plate. Therefore, the FE results were used to propose two parametric formulas for determining the f_LJF in X-joints with external ring or external plate under brace compressive load. Moreover, the derived formulas were checked based on the UK DoE acceptance criteria.     

弹簧支吊架在FPSO高温管道中的应用

高温条件下管道热胀、冷缩和端点附加位移产生的位移载荷是造成管道应力过大和相连设备管口扭矩、反力过大的主要因素。合理设计管道走向和支架布置来增加管道系统柔性是减小管道热载、降低管道应力的主要途径。以机舱排烟管道系统为例,在CAESAR II中建立数值模型,分析了排烟管道的热胀载荷对管道的影响,比较了弹簧支架约束与刚性支架约束对高温排烟管道一次、二次应力的影响。研究发现,在高温管道中,弹簧支吊架不仅能增加管道系统的柔性,减小管道热应力,而且能降低管道对支架的约束载荷,减小管道所受的集中力。     

基于RMA方法的汽车车身CAN总线优化设计

针对汽车车身控制信息的高实时性和车身CAN系统扩充的高灵活性等特殊要求,介绍用于实时系统分析的速率单调分析(RMA)方法,在原总线利用率、信息最坏响应时间等实时性指标基础上引入总线扩展灵活性因子进行车身CAN总线方案的寻优设计,并以典型汽车车身控制系统为例,对单信号方案和信号组合方案进行实时性和扩展灵活性对比分析,在线试验结果验证了理论分析数据的正确性。     

煤焦油沥青的改性研究

通过外掺混杂树脂、石棉纤维和滑石粉等材料,经过大量试验,对煤焦油沥青进行改性,制备出粘附性能好,低温柔性优良,耐久性好,适合于北方寒冷地区应用的防水材料,从而为传统煤焦油沥青在东北地区的应用提供了新的思路。     

Roll- and pitch-plane coupled hydro-pneumatic suspension

Passive fluidically coupled suspensions have been considered to offer a promising alternative solution to the challenging design of a vehicle suspension system. A theoretical foundation, however, has not been established for fluidically coupled suspension to facilitate its broad applications to various vehicles. The first part of this study investigates the fundamental issues related to feasibility and properties of the passive, full-vehicle interconnected, hydro-pneumatic suspension configurations using both analytical and simulation techniques. Layouts of various interconnected suspension configurations are illustrated based on two novel hydro-pneumatic suspension strut designs, both of which provide a compact design with a considerably large effective working area. A simplified measure, vehicle property index, is proposed to permit a preliminary evaluation of different interconnected suspension configurations using qualitative scaling of the bounce-, roll-, pitch- and warp-mode stiffness properties. Analytical formulations for the properties of unconnected and three selected X-coupled suspension configurations are derived, and simulation results are obtained to illustrate their relative stiffness and damping properties in the bounce, roll, pitch and warp modes. The superior design flexibility feature of the interconnected hydro-pneumatic suspension is also discussed through sensitivity analysis of a design parameter, namely the annular piston area of the strut. The results demonstrate that a full-vehicle interconnected hydro-pneumatic suspension could provide enhanced roll- and pitch-mode stiffness and damping, while retaining the soft bounce- and warp-mode properties. Such an interconnected suspension thus offers considerable potential in realising enhanced decoupling among the different suspension modes.     

基于柔度曲率矩阵的加筋板结构损伤识别方法

为了对船舶工程中典型结构即加筋板结构的损伤部位进行准确的损伤识别分析,文章提出了一种基于柔度曲率矩阵的损伤识别方法并进行了仿真分析。首先对加筋板结构进行单元划分,以结构响应通过矩阵的列最大值来建立节点柔度矩阵,并通过二阶微分对柔度值的变化进行放大进而得到柔度曲率矩阵,最后通过柔度曲率矩阵图或者柔度曲率矩阵的行(列)曲率图来判断损伤位置。算例分析表明,该方法损伤定位准确并且具有较高的灵敏度,避免了使用原未损结构的模态参数,只需损伤结构的一阶或者前几阶模态信息就可以有效地进行损伤识别分析。通过大量模拟,给出了加筋板结构损伤的判别图。     

Modeling capacity flexibility of transportation networks

Flexibility of the transportation system is one of the important performance measures needed to deal with demand changes. In this paper, we provide a quantitative assessment of capacity flexibility for the passenger transportation network using bi-level network capacity models. Two approaches for assessing the value of capacity flexibility are proposed. One approach is based on the concept of reserve capacity, which reflects the flexibility with respect to changes in terms of demand volume only. The second approach allows for variations in the demand pattern in addition to changes in demand volume in order to more fully capture demand changes. Two models are developed in the second approach to consider two types of capacity flexibility. The total capacity flexibility allows all users to have both route choice and destination choice when estimating capacity flexibility. The limited capacity flexibility estimates how much more demand volume could be added to a fixed demand pattern by allowing the additional demand to deviate from the fixed demand pattern. Numerical examples are provided to demonstrate the different concepts of capacity flexibility for a passenger transportation system under demand changes.