三种减少直流断路器的船舶中压直流电网拓扑结构及性能比较

为保护整流变换器及减少短路时电网中电容放电的影响,船舶中压直流电网中存在大量断路器,造成结构复杂成本高,为此本文提出三种结构的变换器,即基于级联H桥与多端DC/DC的结构(TMPDC),基于MMC整流与逆变的多级调压结构(MVR)和基于不控整流与模块化多电平变换器(MMC)驱动负载结合的结构(UR-MMC)。本文对三种结构的组成与特点进行了分析,并在电压谐波,功耗,体积,故障特性等方面进行了比较,最后通过仿真进一步阐述了不同结构在运行波形上的差异。通过各结构的特性分析,为中压直流电网在船舶上的应用提供了参考。     

Estimation of value of travel time reliability

In mode choice decision, travelers consider not only travel time but also reliability of its modes. In this paper, reliability was expressed in terms of standard deviation and maximum delay that were measured based on triangular distribution. In order to estimate value of time and value of reliability, the Multinomial and Nested Logit models were used. The analysis results revealed that reliability is an important factor affecting mode choice decisions. Elasticity is used to estimate the impacts of the different policies and system improvements for water transportation mode. Among these policies, decision maker can assess and select the best alternative by doing the benefit and cost analysis based on a new market share, the value of time, and the value of reliability. Finally, a set of promising policies and system improvement of the water transportation were proposed.     

一种改进的基于密度和网格的高维聚类算法

提出了一种改进的基于密度和网格的高维聚类算法,并对算法有效性进行了验证.该算法通过减少样本点数量的方法达到减少稠密子空间数量.在发现高维稠密子空间时,对样本库进行精简.这些样本点的求得能有效减少求解最小聚类的时间复杂度.     

地下车站综合接地系统中若干问题探讨

讨论了接地电阻取值、人工接地网设置的必要性及合理性、自然接地极与杂散电流辅助收集网的关系等若干问题。阐述了部分解决方案。提供了一种可行的综合接地系统方案,可为人身安全及地铁运营提供有力保障。     

停运工况地铁站台初期火灾烟气运动规律

选用碎纸、棉绳和聚氨酯塑料试验火,在地铁站台进行火灾实体试验。在车站夜间停运条件下,对不同类型试验火源的烟气速度、温度进行监测分析,研究地铁中具有镂空格栅吊顶车站站台在停运时初期火灾烟气运动的规律,为地铁车站火灾探测研究提供技术支持。     

基于动态水域网格计算的船舶领域研究

为了满足现代船舶的发展需求,结合船舶自动识别系统(AIS)数据量巨大,包含了丰富的船舶信息等优点.本文利用SQL2012对AIS数据进行处理,建立包含船舶静态信息和动态信息的数据库;借助C#程序语言,构建以中心船舶为原点的网格坐标系,并以船舶间相对距离方位计算周围船舶在网格中的相对位置坐标;对同长度和类型的船舶进行网格叠加计算,并以船舶频数的方式进行统计,采用数据处理软件Matlab以最小二乘法的方式对统计结果进行处理;对研究水域的主要船型不同尺度的船舶领域进行对比和统计分析,并对不同船型船舶领域略作讨论,总结得出开阔水域船舶领域的特点.     

Optimal design of electric vehicle public charging system in an urban network for Greenhouse Gas Emission and cost minimization

In this paper, we address the optimization problem of allocation of Electric Vehicle (EV) public fast charging stations over an urban grid network. The objective is to minimize Greenhouse Gas Emissions (GHG) under multiple constraints including a limited agency budget, accessibility of charging stations in every possible charging request and charging demands during peak hours. Additionally, we address bi-criteria problems to consider user costs as the second objective. A convex parsimonious model that depends on relatively few assumptions and input parameters is proposed and it is shown to be useful for obtaining conceptual insights for high-level planning. In a parametric study using a hypothetical urban network model generated based on realistic parameters, we show that GHG emissions decrease with agency budget, and that the reductions vary depending on multiple factors related to EV market and EV technologies. The optimal solutions found from the bi-criteria problems are shown to be close to the solution minimizing GHG emissions only, meaning that the emission minimizing policy can also minimize user costs.     

港口与运输方式及陆港联合选择的巢式Logit模型

为刻画托运人对港口、运输方式及陆港的联合选择行为，将港口费用、等待时间、班轮频率、货物价值、单次运量、运输成本、运输及通关时间、准班率、陆港服务作为效用变量，构建港口选择位于上层、运输方式及陆港选择位于下层的巢式Logit模型.基于辽宁部分城市集装箱托运人的RP/SP调查数据，对模型参数进行估计和检验.结果表明，低运量倾向选择公路运输，托运人对多式联运的运输成本、运输及通关时间比公路运输的更重视，对公路运输的准班率比多式联运的更重视，陆港服务对多式联运具有显著正向影响，巢式Logit模型比MNL模型具有更优的统计学特征.     

一种网格 k-近邻集的边界点识别算法

为了高效识别聚类边界,根据边界周围区域存在密度差异的特征,提出了一种网格 k‐近邻集的边界识别算法（BGN ）。在网格空间中,该算法根据网格单元和它最近邻居单元的 k‐近邻集的质量及其单元间中心距离确定边界度,由边界度和边界阈值判断每个网格单元是否为边界单元或噪声单元。通过从边界单元中提取更靠边缘的数据作为边界点的方式,使得边界更精细。实验结果表明,该算法能有效和快速识别出多密度数据集的聚类边界和噪声。