排序方式: 共有85条查询结果,搜索用时 15 毫秒
1.
系统讨论了工程上影响弯管壁厚的因素 ,并在此基础上对工程上弯管设计计算的公式进行了推导、简化归纳 ,列出了计算公式中各参数的确定方法 ;最后通过实例对所推公式与工程上弯管计算公式进行了对比分析。 相似文献
2.
为研究柴油机燃烧系统参数匹配对柴油机动力和排放性能的影响,首先分别利用AVL_BOOST和AVL_FIRE仿真软件建立4190ZLC-2型船用柴油机整机模型和缸内燃烧高压循环模型,然后基于已建模型应用正交试验设计方法安排柴油机进气系统、喷油系统和燃烧室结构尺寸参数匹配仿真计算。研究结果表明,通过极差分析可以得出燃烧系统参数对4190ZLC-2型柴油机性能的影响主次顺序。以柴油机指示功率为评价指标时,参数组合0.26 mm-28°CA-160°-0.9-145 mm-2.6 mm-22 mm(喷孔直径-喷油提前角-油束夹角-涡流比-喉口直径-凸台高度-凹坑半径)对应的指示功率为63.40 k W,比原机仿真值高15%;以NOX排放为评价指标时,参数组合0.30 mm-24°CA-140°-0.4-135 mm-6.6 mm-14 mm(喷孔直径-喷油提前角-油束夹角-涡流比-喉口直径-凸台高度-凹坑半径)对应的NOX排放质量分数为0.015 7%,比原机仿真值低30.2%。 相似文献
3.
针对行星齿轮减速器,采用MIMO方法进行模态试验,将方案一(弹性绳悬挂)和方案二(弹性绳和充气轮胎混合支撑)两种形式下高频信号和低频信号得到的六组试验数据用LMS模态分析软件进行处理,得到七阶模态频率及其振型,及各阶模态的模态质量、模态刚度和模态阻尼等信息。最后分别对两种方案进行模态可信度和有效性分析,分析结果表明,两种方案在模态参数估计上都能取得相对合理的结果,方案二在获取低频模态信息方面效果较好,而方案一在获取高频模态信息方面效果较好,具体应用时应根据所关心的频段和模态参数选取不同方案的数据进行参考。 相似文献
4.
《铁道标准设计通讯》2017,(8):27-31
纵断面线形的精确分段是后续铁路线路优化调整的基础。针对现有方法自动分段效果差且精度低的缺点,研究一种能够实现线形精确自动分段的算法。首先,在对比各种方法的基础上,提出一种基于测点近似曲率的线形自动分段算法,针对铁路竖曲线弧径比过小易导致的拟合病态问题,采用基于半径确定的最小二乘算法进行圆心精确定位,以提高分段点的精度。经实测数据验证该算法能自动化识别特征点位置,且具有更高的精度。 相似文献
5.
6.
7.
Michiel C.J. Bliemer John M. Rose 《Transportation Research Part A: Policy and Practice》2011,45(1):63-79
Discrete choice experiments are conducted in the transport field to obtain data for investigating travel behaviour and derived measures such as the value of travel time savings. The multinomial logit (MNL) and other more advanced discrete choice models (e.g., the mixed MNL model) have often been estimated on data from stated choice experiments and applied for planning and policy purposes. Determining efficient underlying experimental designs for these studies has become an increasingly important stream of research, in which the objective is to generate stated choice tasks that maximize the collected information, yielding more reliable parameter estimates. These theoretical advances have not been rigorously tested in practice, such that claims on whether the theoretical efficiency gains translate into practice cannot be made. Using an extensive empirical study of air travel choice behaviour, this paper presents for the first time results of different stated choice experimental design approaches, in which respective estimation results are compared. We show that D-efficient designs keep their promise in lowering standard errors in estimating, thereby requiring smaller sample sizes, ceteris paribus, compared to a more traditional orthogonal design. The parameter estimates found using an orthogonal design or an efficient design turn out to be statistically different in several cases, mainly attributed to more or less dominant alternatives existing in the orthogonal design. Furthermore, we found that small designs with a limited number of choice tasks performs just as good (or even better) than a large design. Finally, we show that theoretically predicted sample sizes using the so-called S-estimates provide a good lower bound. This paper will enable practitioners in better understanding the potential benefits of efficient designs, and enables policy makers to make decisions based on more reliable parameter estimates. 相似文献
8.
9.
张蕊萍 《兰州交通大学学报》2006,25(3):81-83,88
提出了利用循环前缀对信道进行估计的方法,即在梳状导频模式时,使用导频获得导频子信道频率响应后,对其在频域方向进行插值得到数据子信道响应,在以后没有导频的序列的数据周期内,使用循环前缀对信道进行估计.仿真结果表明:和两个一维的插值方法相比,在不降低系统性能的情况下,改善了系统的实时性能. 相似文献
10.
MIMO-OFDM信道估计算法中,基于相位偏移导频结构的时域最小二乘算法,具有实现过程简便、精度高等特点,但是该算法需要通过复数计算完成。为了降低计算量、节省系统存储空间,对算法进行了两方面的改进:①提出一种由实数构成的新的导频结构;②根据新的导频结构,利用离散哈特莱变换提出新的信道估计算法。由于采用了离散哈特莱变换,算法只需要通过实数计算完成,能够有效降低计算复杂度。与通过复数计算的结果相比,算法没有造成计算精度的下降。采用Matlab软件进行仿真,验证了该导频结构和算法的有效性及可靠性。 相似文献