基于储能飞轮的电动汽车制动能量回收

飞轮储能具有绿色无污染的特点,发展潜能巨大。文章以电磁耦合式储能飞轮为研究对象,将其应用于纯电动汽车的制动能量回收,通过整车仿真,分析电磁耦合式储能飞轮的能量回收效率。建立搭载电磁耦合式储能飞轮系统的整车模型,并仿真验证,在初速度为70 km/h时,制动时间为5.853 s,制动距离为70.67 m。分别在不同初始速度和储能飞轮转动惯量条件下进行制动仿真。随着初速度提高,电磁转差离合器作用时间延长,飞轮储存能量增加,但储能飞轮的回收效率相差不大,且能量回收效率均不低于22.4%;转动惯量越大,回收的能量多,回收效率高,但制动时间增加,不利于行车的安全性。由此得出结论:电磁耦合式储能飞轮系统可以有效回收制动产生的能量,选择合适转动惯量的飞轮可以提高制动能量的回收效率。     

深海变径声阵缆布放回收装置研究

本文提出了基于深海工作站运搭载的变径缆海底布放回收方式，介绍了变径缆海底布放回收装置的主要工作原理和结构组成，完成了布放回收装置主要部套件的设计计算以及和电液控制系统的设计及计算。     

绿色港湾建设

结合国内外10大著名港口实例,从规划设计、结构选型、使用年限确定、旧有建筑物的改造和再利用、提高环保理念和健全法规等方面,论述了＂绿色港湾＂建设的必要性和可行性,以探研绿色港湾建设及其相关概念,并提出建议。可供规划设计人员参考。     

地铁牵引供电框架保护及功能性改造

针对广州地铁1号线不能远程区分框架保护类型和不能远程复归的状况,结合西门子S5系列PLC技术、SINAUT技术、牵引供电技术,对框架保护进行功能性改造,大大减少了框架保护故障的处理时间.改造技术方案主要通过研究数据的传递方式、协议转换、控制逻辑关系,修改组态软件、监控程序、接口程序、PLC程序的方式来实现.     

SAWI在水泥混凝土路面薄层罩面中的应用

文章结合广清高速公路水泥混凝土薄层罩面结构设计实例,介绍了应用高弹改性沥青应力吸收层（SAWI）的水泥混凝土加铺薄沥青层的路面结构设计过程,阐述了SAWI的性能特点与施工质量控制的方法和重点,并对其实际使用性能进行了跟踪检测。结果表明：应用SAWI的水泥混凝土薄沥青层加铺技术可较好地抵抗反射裂缝,并能减少路面厚度,降低工程造价,是一项具备良好发展前景的水泥路面加铺新技术。     

Balancing energy consumption and risk of delay in high speed trains: A three-objective real-time eco-driving algorithm with fuzzy parameters

Eco-driving is an energy efficient traffic operation measure that may lead to important energy savings in high speed railway lines. When a delay arises in real time, it is necessary to recalculate an optimal driving that must be energy efficient and computationally efficient.In addition, it is important that the algorithm includes the existing uncertainty associated with the manual execution of the driving parameters and with the possible future traffic disturbances that could lead to new delays.This paper proposes a new algorithm to be executed in real time, which models the uncertainty in manual driving by means of fuzzy numbers. It is a multi-objective optimization algorithm that includes the classical objectives in literature, running time and energy consumption, and as well a newly defined objective, the risk of delay in arrival. The risk of delay in arrival measure is based on the evolution of the time margin of the train up to destination.The proposed approach is a dynamic algorithm designed to improve the computational time. The optimal Pareto front is continuously tracked during the train travel, and a new set of driving commands is selected and presented to the driver when a delay is detected.The algorithm evaluates the 3 objectives of each solution using a detailed simulator of high speed trains to ensure that solutions are realistic, accurate and applicable by the driver. The use of this algorithm provides energy savings and, in addition, it permits railway operators to balance energy consumption and risk of delays in arrival. This way, the energy performance of the system is improved without degrading the quality of the service.     

海洋石油平台余热利用研究

东海某DPP平台投产近十五年后,出现设备老化、工艺系统处理量发生变化等情况,从而透平电站、热油锅炉和工艺处理系统出现余热,如何减少能源浪费,及时有效回收利用,需要及时解决问题。通过对基础资料分析研究、平台生产实地调研,提出余热利用方案,并进行成本投资/回报比较,最终验证了方案的正确性。     

A dynamic model for marginal cost pricing of port infrastructures

ABSTRACT

A dynamic model for marginal cost pricing of port infrastructures links costs to system performance by combining a power-law function with time-dependent queueing analysis. Additionally, the model incorporates the marginal cost of capacity, including the effects of economies of scale. This allows the calculation of the marginal cost price under a dynamic framework. The model accounts for nonlinear behaviour of port demand, which is sensitive to price and service levels. The effects over time of cost and service levels on the port’s operational performance are quantified. The proposed model allows determining the optimal timing for capacity investment. The model is a starting point for the application of marginal cost pricing to ports. However, for practical application of such pricing method it is necessary to apply a system’s approach, as productivity and costs must be assessed at the terminal’s component level. This should allow the derivation of a marginal cost function at the terminal’s component level.     

基于模态应力恢复的汽车零部件虚拟疲劳试验方法

基于有限元模态分析、柔性多体动力学求解和疲劳寿命预测的相关理论,通过模态应力恢复得到了汽车零部件疲劳载荷历程,并将其应用于虚拟疲劳试验,解决了汽车设计过程中无法快速、准确预知零部件疲劳寿命的难题。该试验方法应用于某车双横臂独立前悬中的下横臂,在较短的时间内获得了该零件的预测疲劳寿命、寿命安全系数及危险部位等信息。结果表明该虚拟疲劳试验方法可作为汽车设计过程中的有效试验手段。     

简析中美两国清障车标准中托举质量的计算公式

通过对比中美两国《清障车》标准中托举质量的计算公式,分析公式中各参数的选取条件,结合国产底盘中前后轴荷的分布特点,以实例计算结果为依据,提出了适合国情的计算清障车托举质量的参数条件。