新型测力轮对标定试验台研制

在分析国内外测力轮对标定技术现状及不足的基础上,提出了新型测力轮对标定试验台的设计要求和设计目标。研制的TK-LDBD型测力轮对静态标定试验台在实现垂、横、纵三向力的独立及联合精确加载的基础上大幅提升了设备适用范围及标定效率。为高精度连续测量测力轮对的研究及运用提供了技术支撑。     

间歇式沥青拌和站冷料供给系统流量的标定方法

以实例介绍间歇式沥青拌和冷料供给系统流量的标定方法和步骤，以确保冷料供给器按目标配合比准确供料，使沥青混合料的生产配比更加接近目标配比，保证拌和成品料的质量。     

新型负阶跃动态扭矩校准装置

针对扭矩传感器静态校准无法完全满足实际需要的难题,设计一种新型100 N·m负阶跃动态扭矩校准装置,并阐述该装置的工作原理和关键技术。校准装置由扭矩产生装置、连接系统、制动系统、信号处理控制系统和空气轴承系统组成,利用火工拔销器产生负阶跃动态扭矩,较大程度上降低负阶跃动态扭矩的下降时间,并采用空气轴承的支承方式提高动态扭矩的传递精度。通过对试验数据进行分析和处理,结果表明该装置负阶跃扭矩产生时间低于0.1 ms。不确定度分析结果显示,该装置的扩展不确定度U为4.22%,扩展因子k为2。     

基于粒子群算法的水下多元线阵阵形有源校正方法

针对存在阵元位置误差的水下多元线阵,提出一种基于粒子群优化算法的远场有源阵形校正方法.该方法选用2个辅助源分时工作方式,利用无条件最大似然方位估计算法构建目标函数,并通过粒子群算法对阵元位置进行寻优.利用该方法对均匀线阵进行性能仿真实验.结果表明:该方法稳健性好、校正精度高,具有一定的应用前景.     

Validation of an extended discrete first-order model with variable speed limits

This paper validates the prediction model embedded in a model predictive controller (MPC) of variable speed limits (VSLs). The MPC controller was designed based on an extended discrete first-order model with a triangular fundamental diagram. In our previous work, the extended discrete first-order model was designed to reproduce the capacity drop and the propagation of jam waves, and it was validated with reasonable accuracy without the presence of VSLs. As VSLs influence traffic dynamics, the dynamics including VSLs needs to be validated, before it can be applied as a prediction model in MPC. For conceptual illustrations, we use two synthetic examples to show how the model reproduces the key mechanisms of VSLs that are applied by existing VSL control approaches. Furthermore, the model is calibrated by use of real traffic data from Dutch freeway A12, where the field test of a speed limit control algorithm (SPECIALIST) was conducted. In the calibration, the original model is extended by using a quadrangular fundamental diagram which keeps the linear feature of the model and represents traffic states at the under-critical branch more accurately. The resulting model is validated using various traffic data sets. The accuracy of the model is compared with a second-order traffic flow model. The performance of two models is comparable: both models reproduce accurate results matching with real data. Flow errors of the calibration and validation are around 10%. The extended discrete first-order model-based MPC controller has been demonstrated to resolve freeway jam waves efficiently by synthetic cases. It has a higher computation speed comparing to the second-order model-based MPC.     

A methodology for evaluating the performance of model-based traffic prediction systems

Model-based traffic prediction systems (mbTPS) are a central component of the decision support and ICM (integrated corridor management) systems currently used in several large urban traffic management centers. These models are intended to generate real-time predictions of the system’s response to candidate operational interventions. They must therefore be kept calibrated and trustworthy. The methodologies currently available for tracking the validity of a mbTPS have been adapted from approaches originally designed for off-line operational planning models. These approaches are insensitive to the complexity of the network and to the amount and quality of the data available. They also require significant human intervention and are therefore not suitable for real-time monitoring. This paper outlines a set of criteria for designing tests that are appropriate for the mbTPS task. It also proposes a test that meets the criteria. The test compares the predictions of the mbTPS in question to those of a model-less alternative. A t-test is used to determine whether the predictions of the mbTPS are superior to those of the model-less predictor. The approach is applied to two different systems using data from the I-210 freeway in Southern California.     

基于双轴位置转台的捷联惯导系统级标定技术

本文研究一种基于双轴位置转台的激光陀螺捷联惯导系统的系统级标定方法。建立了附加约束条件的陀螺和加速度计标定模型,从捷联惯导系统的误差方程出发,建立30维Kalman滤波标定模型,以速度和位置作为观测量,并设计双轴位置旋转路径,对惯性仪表标定参数进行激励与辨识。仿真实验结果表明,该方法能够准确估计出陀螺和加速度计的15个标定误差参数,具有一定的参考价值。     

圆电极电磁流量计干标定模型及仿真

目前在电磁流量计的干标定研究中，为方便公式推导，通常将实际的圆电极简化为方电极模型．这种简化在电极尺寸较大时，会引入不必要的计算误差，影响流量计的标定精度．本文从圆电极模型出发，论述了其对应权重函数的计算过程．并针对大尺寸圆电极模型进行理想化计算，得到其点电极模型，并运用此模型进行了仿真研究．     

电子油门故障自诊断策略及标定方法研究

针对自主研发的电喷系统所匹配的两种电位器式油门开发了故障自诊断策略,包含信号检测、合理性检测及故障后的失效保护等功能;诊断采用专家系统的方法,策略的标定采用统计分析与专家经验相结合的手段,考虑到油门参数在批产状态下的个体差异以及磨损老化等引起的信号漂移,在油门样本的选取,抽样方法的确定上都采取了对策,使得油门诊断策略兼顾了敏感性和包容性的要求,为自主研发的电喷系统顺利进入产业化提供了技术支持。     

共轨柴油机基于模型标定方法应用研究

利用基于模型标定方法对某共轨柴油机进行经济性标定优化;系统介绍了基于模型标定方法的3个阶段,即试验设计、发动机统计建模和标定优化。试验结果表明,优化后的发动机燃油消耗率MAP有明显改善,且整个标定过程耗时较少。