共查询到20条相似文献,搜索用时 171 毫秒
1.
2.
3.
为了对SUV整车操纵稳定性进行评价和预测,以多刚体理论为基础运用ADAMS/CAR软件建立了某SUV整车的操纵动力学多体仿真模型,并根据国家的操纵稳定性标准,仿真分析了此车的操纵稳定性,为以后汽车的操纵稳定性研究和改型设计提供了参考依据。 相似文献
4.
5.
《汽车工程》2015,(8)
根据双离合器式自动变速器车辆的不同行驶工况,从控制的角度出发,将控制品质评价指标细分为起步品质和换挡品质的评价指标。基于MATLAB/Simulink搭建了某DCT样车整车模型,包括发动机、双离合器与操纵装置、变速器与同步器、负载、整车动力学、控制器和驾驶员等子模型,并设计了控制品质客观评价系统,研究各个评价指标与控制品质的映射关系。采用层次分析法确定控制品质评价指标权值,通过整车系统模型与评价系统的联合仿真,确定了控制目标,即各个评价指标的控制期望区间,为下一步优化DCT的控制策略、控制算法提供了优化目标,得到了能够保证DCT起步品质和换挡品质的控制期望值,为整车控制策略和控制算法优化提供了参考。 相似文献
6.
7.
8.
9.
利用ADAMS软件,建立整车模型。对整车进行操纵稳定性分析,包括稳态回转、角跃阶输入、低速与高速转向回正以及单移线试验。从而实现了虚拟样机技术的应用,仿真分析整车的操纵稳定性,也验证了模型建立的准确性。 相似文献
10.
11.
本文在进行EHB系统通用架构分析的基础上,提出基于实车的EHB系统制动性能评价方法;通过分析EHB系统的通用构架,解析EHB系统的评价指标,从EHB系统的性能方面进行对比研究,深入分析对EHB系统实车性能产生影响的因素,建立系统的评价指标体系,为整车企业与科研机构对EHB系统进行研发验证提供了比较全面的参考方法。 相似文献
12.
Desired yaw rate and steering control method during cornering for a six-wheeled vehicle 总被引:1,自引:0,他引:1
S. -J. An K. Yi G. Jung K. I. Lee Y. -W. Kim 《International Journal of Automotive Technology》2008,9(2):173-181
This paper proposes a steering control method based on optimal control theory to improve the maneuverability of a six-wheeled
vehicle during cornering. The six-wheeled vehicle is believed to have better performance than a four-wheeled vehicle in terms
of its capability for crossing obstacles, off-road maneuvering and fail-safe handling when one or two of the tires are punctured.
Although many methods to improve the four-wheeled vehicle’s lateral stability have been studied and developed, there have
only been a few studies on the six-wheeled vehicle’s lateral stability. Some studies of the six-wheeled vehicle have been
reported recently, but they are related to the desired yaw rate of a four-wheeled vehicle to control the six-wheeled vehicle’s
maneuvering during corning. In this paper, the sideslip angle and yaw rate are controlled to improve the maneuverability during
cornering by independent control of the steering angles of the six wheels. The desired yaw rate that is suitable for a six-wheeled
vehicle is proposed as a control target. In addition, a scaled-down vehicle with six drive motors and six steering motors
that can be controlled independently is designed. The performance of the proposed control methods is verified using a full
model vehicle simulation and scaled-down vehicle experiment. 相似文献
13.
14.
15.
H. -Z. Li L. Li J. Song L. -Y. Yu 《International Journal of Automotive Technology》2011,12(5):679-686
A new comprehensive driver model is presented for critical maneuvering conditions with more accurate dynamic control performance.
In order to achieve a safe maneuvering mode, a new path planning scheme to maintain stability of the vehicle was designed.
A new steering strategy, considering the errors of vehicle position and yaw angle between the real track and the planned path,
was established to obtain the steering angle. Therefore, the vehicle can be adjusted to accurately follow the desired path
with the driver model, and the stability of the vehicle and the smoothness of the steering angle input were comprehensively
considered. Simulation results were used to validate the control performance in comparison with the optimal preview driver
model proposed by Macadam. 相似文献
16.
17.
本文结合产品数据管理的理念,采用自顶向下(Top-down)的设计方法对整车级产品协同设计进行初步的分析,探讨了整车及各系统间在设计过程中的基准定义模式和信息交互办法。 相似文献
18.
独立悬架汽车转向系统刚度测量 总被引:6,自引:0,他引:6
汽车转向系统刚度是影响汽车操纵稳定性的重要因素之一,本文介绍了一种实用的测量独立悬架汽车转向系统刚度的试验方法,分析了汽车转向系统的受力状况,推导了转向系统中各环节刚度的计算公式,对一辆实车进行的试验测量得到了可靠的数据结果,对进一步探讨转向系统刚度对汽车操纵稳定性的影响具有重要的意义。 相似文献
19.
介绍了装备ABS车辆制动综合性能的评价体系,并探讨了道路试验项目及其评价内容。重点阐述了ABS车辆的 附着系数的测定方法和道路试验项目,提出侧向稳定性作为ABS性能评价项目之一的可行性。 相似文献