静力触探试验在软土地基沉降推算分析中的应用

针对近海吹填造陆工程的地基沉降监测和分析,通常在回填形成陆域后安装沉降板、分层沉降仪等仪器开展沉降监测工作,但是吹填或陆推回填过程中引起的沉降量很难监测.香港国际机场第三跑道填海工程,首次采用静力触探CPT检测技术评定不同土层的分界面,用于推算和分析回填施工过程中的地基沉降量,提供一种全新的沉降量推算和计量的新思路,为...     

500m^3／h绞吸式挖泥船电气系统改进设计

引进的绞吸式挖泥船不完全适合黑龙江水系统的使用要求，在首次自动设计，建造该型挖泥船时进行了改进。本文介绍了其主要性能及机械电气系统设计中采取的有效措施。     

气胀式救生筏的质量尚需提高

气胀式救生筏是船舶主要救生设备,它具有施放使用容易,成型迅速,一般为手动开启,紧急时会自动胀起,以及保温性能好等优点.高质量的救生筏,是救人命于危难的关键设备.但据我们调查,救生筏的质量还存在不少问题.     

自持式电子支援系统

电子支援系统通过采用一系列人工智能技术正向无人操纵状态发展，其中采用的人工智能技术包括人工神经网络、遗传算法、智能数据库、模糊逻辑和数据融合技术以及专家系统。这些技术的应用和实现对自适应自持式地识别不合作目标是有用或必需的。电子支援在整个信号链及下列处理中都使用人工智能技术：通过自动射频频带排序和天线指向来捕获目标、密集信号环境的空白区剔除和各发射机特性确定、具有自动光学／红外成像的快速高可信度的     

自主式水下潜器分层递阶控制系统

本文就自主式水下潜器的模型，给出了该潜器分为四层的分层递阶控制系统及分层递阶控制的仿真结果。     

一种基于 XML 的分层式舰船网络管理模式的设计方法*

针对现有的舰船网络管理系统性能效率不高的现状,提出了一种基于XM L的分层式舰船网络管理模式,着重分析了该模式下XM L协议和分层式管理的优势,并对该模式下相关模块进行了设计,最后通过实例分析验证了该模式的合理性和有效性。     

深埋式薄壁圆筒结构在滩海地基中的受力特性数值模拟

建立三维有限元模型,分析深埋式薄壁圆筒结构在施工工况和使用工况下的结构变形位移、内力分布、基底应力分布、结构-土体间土压力分布,并对比分析了有限元计算结果及规范法计算结果。结果表明,有限元法计算出来的土压力中下段分布呈现"凸肚子"形状,与结构实际受力状态更加接近,有限元计算边界点沉降小于中心点沉降,与分层总和法的计算结果基本一致。     

舰炮对海射击拖曳式电子靶

舰炮对海射击训练长期使用最原始的海靶，检测测量及成绩评定手段落后，为此研制的小型拖曳式电子靶具有自动检测测量功能和射击命中率成绩自动评定功能。系统集雷达、微电子、造船、计算机等先进技术于一体，具有使用方便，成绩评定客观公正等优点。     

浅论滑动式沉降管施工方法

随着我国交通运输事业的发展,公路等级的不断提高,出现大量的填方路基工程,为使路基处于良好的工作状态.因此填方路基的沉降研究就具有非常重要的意义.运用滑动式沉降仪检测时沉降管的埋设问题就显得尤为重要,本文介绍三种埋设方法:机械回填、人工换填以及半机械半人工换填.希望能对现场施工人员起到参考和帮助.     

桶基在单、分层土下的承载特性试验研究

通过在单层和分层饱和土中的模型试验,考察了吸力式桶型基础在静荷载下的承载力特性.分别得到了在竖向荷载,横向荷载下的载荷位移曲线,分层土条件下的承载力特性,以及承载力随密度的变化.     

33rd International Conference on Ocean,Offshore and Arctic Engineering （OMAE2014）

正San Francisco,California,June 8-13,2014.OMAE 2014 is the ideal forum for researchers,engineers,managers,technicians and students from the scientific and industrial communities from around the world to:·meet and present advances in technology and its scientific support;·to exchange ideas and experiences whilst promoting technological progress and its application in industry·to promote international cooperation in ocean,offshore and arctic engineering.In line with the tradition of excellence of previous OMAE conferences,more than 900 technical papers are planned for presentation.Outreach for Engineers Specialty Forum This Specialty Forum is designed for students and professionals who may not be familiar with the Ocean and Offshore industry,as well as those who have just recently specialized in this field.     

Errata

正In the paper"Influence of Fouling Assemblage on the Corrosion Behaviour of Mild Steel in the Coastal Waters of The Gulf of Mannar,India"in Vol.12,No.4,Page:509,References were lost,and the two authors’biographies were identical.The correct text is shown below.We apologize to the authors and our readers for any inconvenience caused by the errors.     

Journal of Marine Science and Application 2014 Sum. Contents

正~~     

第34届海洋、离岸及极地工程国际会议(英文)

正St.John's,Newfoundland,Canada,May 31-June 5,2015 OMAE2015 is the ideal forum for researchers,engineers,managers,technicians and students from the scientific and industrial communities from around the world to: meet and present advances in technology and its scientific support;     

联合作战计划和执行系统

全球指挥控制系统(GCCS)实施当前美国海军网络中心战信息基础设施的联合计划网络。联合作战计划和执行系统(JOPES)支持GCCS实现联合计划。JOPES有两类计划：时间不限的精密预案计划生成作战计划、方案计划或职能计划；时间敏感的危机行动计划生成作战命令或战役方案。前者在和平时期创建的作战计划是后者的计划基础，加速应付危机的能力。     

Recent progress on wave induced loading measurements in warships

Recent measurements of wave induced hull strain and flexure in RN warships are presented together with the derivation of the current design criteria for extreme hull girder bending loads. The history of the development of the shipboard instrumentation used is given and recent developments to improve the quality and ease of analysis of the data are described. An unexpectedly high transverse asymmetry in the longitudinal strains measured in destroyers is shown to be the result of a combination of vertical and lateral bending in oblique seas. Finally recent theoretical comparisons between the loading of Deep-Vee hulls and conventional UK rounded bilge hulls are presented which demonstrate the higher loading experienced by this type of hull form.     

The 11th International Conference on Hydrodynamics (ICHD 2014)

正19–24 October 2014 SingaporeCONFERENCE THEMES The overall aim of the ICHD Conference is to provide a forum for participants from around the world to review,discuss and present the latest developments in the broad discipline of hydrodynamics and fluid mechanics.The first International Conference on Hydrodynamics(ICHD)was initiated in 1994 in Wuxi,China.Since then,9 more ICHD conferences were held subsequently in Hong Kong,Seoul,Yokohama,Tainan,Perth,Ischia,Nantes,Shanghai and St Petersburg.Evidently the ICHD conference has become an important event among academics,researchers,engineers and operators,working in the fields closely related to the science and technology of hydrodynamics.The 11th ICHD will be held in Singapore in 2014.     

第十二届深水操作会议和展览会(英文)

正November 4-6,2014Moody Gardens HotelConvention Center/Galveston,TX The Deepwater Operations Conference and Exhibition is celebrating its 12th anniversary this year.This growing event will continue the tradition of excellence in addressing operational challenges involved in developing deepwater resources.We will return to the Moody Gardens Hotel and Convention Center on November 5-7,2014 in Galveston,Texas.     

Eastbound or westbound ?

In terms of equal sailing distances, where is the inflexion when ships depart from ports in the Asian Continent to New York via Suez and/or Panama？
The answer is China South Port Group （Hong Kong, Shenzhen and Guangzhou）.     

Impact of regulation on the performances of long-distance transport services: A comparison of the different approaches in Sweden and Norway

Despite the many socio-economic similarities between Sweden and Norway, differences in jurisdiction, organisation, cooperation, and financing of long-distance passenger train and coach services have led to the development of four distinctively different ways of serving the markets. This paper describes how the train and coach markets have developed in the two countries, with emphasis on regulatory and industrial structure and a couple of performance variables.Looking at passenger rail, both countries separated infrastructure from operation over a decade ago. However, while Norwegian rail is characterised by an almost monopoly supplier, rail services in Sweden are partly decentralised to the responsibility of county authorities and are widely subjected to competitive tendering. The rest of the network is about to be opened up for on-the-track competition. Swedish Rail (SJ) has spent the last decades consolidating its core business (passenger rail) and sold out its other businesses. In contrast, the Norwegian state rail (NSB) has expanded its business to become a major bus operator and property owner, with extensions also into the Swedish market.The coach industry was more recently deregulated in both countries. The Swedish coach market is dominated by privately owned companies operating services to and from Stockholm. In Norway, state-owned NSB is a major coach operator on medium distance routes, and is also the largest partner of Nor-Way Bussekspress which totally dominates long-distance coach services. Further, the Norwegian coach market is characterised by cross-ownership and cooperation which has enabled an extensive route network which covers most of Norway.We find distinct differences in achievements in the two modes and in the two countries. Swedish rail services have succeeded in winning market shares and in renewing and developing both infrastructure and service levels to a greater extent than the Norwegian model. On the other hand, the Norwegian coach market seems to be more developed and efficient compared to its Swedish counterpart.The paper concludes with a discussion on the possible links between the different approaches and the performance observed, with the aim to stimulate further and more detailed research on some important issues.