Comparative life-cycle assessment of conventional (double lane) and non-conventional (turbo and flower) roundabout intersections

This research studied and compared different construction techniques for the road subgrade, embankment and pavement of different types of roundabout intersections in order to assess their environmental sustainability. A Life Cycle Assessment (LCA) was carried out on double lane, turbo- and flower roundabouts.We considered virgin materials and reclaimed asphalt pavement (RAP) for the pavement construction. Also the environmental effects due to in situ lime stabilization of fine-grained soils were assessed in order to reduce the use of virgin material in road subgrades.The use of reclaimed asphalt pavement (RAP) can lead to a significant reduction in pollutant emissions and energy consumption (especially due to the lesser material transport) – though with a slightly different impact according to the different percentages employed – compared to the pavements constructed with virgin materials. The same consideration can be made for fine soils with in situ lime stabilization: on the one hand, the technique allows to improve significantly the mechanical properties of soils which would be otherwise dumped and, on the other, to provide considerable environmental benefits. The life cycle assessment of the pavement was carried out with the help of the PaLATE software (by comparing different maintenance scenarios) while emissions and energy consumption in the use phase at intersections were evaluated by means of closed-form models (to estimate vehicle delays and speeds of vehicles) and the COPERT software.Finally, the generalized costs covered in the whole life cycle of roundabouts (i.e. sum of construction, maintenance and environmental costs) were assessed and associated to the different construction options.     

The importance of the use phase on the LCA of environmentally friendly solutions for asphalt road pavements

In order to assess sustainability of products and processes, different methodologies have been developed and used in the last years. In the road pavement construction area, most methodologies used for Life Cycle Assessment (LCA) are essentially focused in the construction phase. The present paper analyses the importance of the use phase of a road in the LCA of different paving alternatives, namely by evaluating energy consumption and gaseous emissions throughout the road pavement’s life. Therefore, a new LCA methodology for road pavements was developed, and the results of its application to a case study involving the construction of alternative pavement structures are discussed. The study intends to assess the influence of using more sustainable paving construction alternatives (asphalt recycling vs. conventional asphalt mixtures), and/or different surface course materials (which have a higher influence on the rolling resistance and, therefore, affect the performance during the use phase). The LCA results obtained for this case study showed that the reductions in energy consumption and gaseous emissions obtained during the use phase, for pavement alternatives with a lower rolling resistance surface course, are higher than the total amount of energy consumption and gas emissions produced during construction. It is therefore clear that some improvements in the characteristics of the surface course may have an effect over the road use phase that will rapidly balance the initial costs and gas emissions of those interventions. The LCA results obtained also showed that the sustainability of pavement construction may also be improved using recycled asphalt mixtures.     

Traffic modelling in system boundary expansion of road pavement life cycle assessment

This paper uses a case study of a UK inter-urban road, to explore the impact of extending the system boundary of road pavement life cycle assessment (LCA) to include increased traffic emissions due to delays during maintenance. Some previous studies have attempted this but have been limited to hypothetical scenarios or simplified traffic modelling, with no validation or sensitivity analysis. In this study, micro-simulation modelling of traffic was used to estimate emissions caused by delays at road works, for several traffic management options. The emissions were compared to those created by the maintenance operation, estimated using an LCA model. In this case study, the extra traffic emissions caused by delays at road works are relatively small, compared to those from the maintenance process, except for hydrocarbon emissions. However, they are generally close to, or above, the materiality threshold recommended in PAS2050 for estimating carbon footprints, and reach 5–10% when traffic flow levels are increased (hypothetically) or when traffic management is imposed outside times of lowest traffic flow. It is recommended, therefore, that emissions due to traffic disruption at road works should be included within the system boundary of road pavement LCA and carbon footprint studies and should be considered in developing guidelines for environmental product declarations of road pavement maintenance products and services.     

The limits of partial life cycle assessment studies in road construction practices: A case study on the use of hydrated lime in Hot Mix Asphalt

Extensive published literature shows that hydrated lime improves Hot Mix Asphalt (HMA) durability. Its impact on the environmental impact of HMA has not been investigated. This paper presents a comparative Life Cycle Assessment (LCA) for the use of HMA without hydrated lime (classical HMA) and with hydrated lime (modified HMA) for the lifetime of a highway. System boundaries cover the life cycle from cradle-to-grave, meaning extraction of raw materials to end of life of the road. The main assumptions were: 1. Lifetime of the road 50 years; 2. Classical HMA with a life span of 10 years, maintenance operations every 10 years; 3. Modified HMA with an increase in the life span by 25%, maintenance operations every 12.5 years. For the lifetime of the road, modified HMA has the lowest environmental footprint compared to classical HMA with the following benefits: 43% less primary total energy consumption resulting in 23% lower emissions of greenhouse gases. Partial LCAs focusing only on the construction and/or maintenance phase should be used with caution since they could lead to wrong decisions if the durability and the maintenance scenarios differ. Sustainable construction technologies should not only consider environmental impact as quantified by LCA, but also economic and social impacts as well. Avoiding maintenance steps means less road works, fewer traffic jams and hence less CO₂ emissions.     

A comparative study of the emissions by road maintenance works and the disrupted traffic using life cycle assessment and micro-simulation

Life cycle assessment is being accepted by the road industry to measure such key environmental impacts as the energy consumption and carbon footprint of its materials and laying processes. Previous life cycle studies have indicated that the traffic vehicles account for the majority of fuel consumption and emissions from a road. Contractors and road agencies are looking for road maintenance works that have the least overall environmental impact considering both the roadwork itself and the disrupted traffic. We review life cycle assessment studies and describe the development of a model for pavement construction and maintenance, detailing the methodology and data sources. The model is applied to an asphalt pavement rehabilitation project in the UK, and the micro-simulation program VISSIM is used to model the traffic on that road section. The simulation results are fed into a traffic emissions model and emissions from the roadwork and the traffic are compared. The additional fuel consumption and emissions by the traffic during the roadwork are significant. This indicates that traffic management at road maintenance projects should be included in the life cycle assessment analysis of such work.     

Time-based life-cycle assessment for environmental policymaking: Greenhouse gas reduction goals and public transit

As decision-makers increasingly embrace life-cycle assessment (LCA) and target transportation services for regional environmental goals, it becomes imperative that outcomes from changes to transportation infrastructure systems are accurately estimated. Greenhouse gas (GHG) reduction policies have created interest in better understanding how public transit systems reduce emissions. Yet the use of average emission factors (e.g., grams CO₂e per distance traveled) persists as the state-of-the-art masking the variations in emissions across time, and confounding the ability to accurately estimate the environmental effects from changes to transit infrastructure and travel behavior. An LCA is developed of the Expo light rail line and a competing car trip (in Los Angeles, California) that includes vehicle, infrastructure, and energy production processes, in addition to propulsion. When results are normalized per passenger kilometer traveled (PKT), life-cycle processes increase energy use and GHG emissions up to 83%, and up to 690% for smog and respiratory impact potentials. However, the use of a time-independent PKT normalization obfuscates a decision-maker’s ability to understand whether the deployment of a transit system reduces emissions below a future year policy target (e.g., 80% of 1990 emissions by 2050). The year-by-year marginal effects of the decision to deploy the Expo line are developed including reductions in automobile travel. The time-based marginal results provide clearer explanations for how environmental effects in a region change and the critical life-cycle processes that should be targeted to achieve policy targets. It shows when environmental impacts payback and how much reduction is achieved by a policy-specified future year.     

Comparative environmental impacts of electric bikes in China

Electric two-wheelers have become a significant mode of transportation in China in the past decade. Though marketed and publicized by some as zero-emission vehicles, little past research has been done to quantify the environmental impacts of electric two-wheelers in China. This paper quantifies some of the environmental impacts of the production processes and use phase of electric two-wheelers and compares them to the environmental impacts of competing modes, including bicycles, buses, motorcycles and cars. The use phase emissions are quantified geographically with significantly higher emissions in coal rich regions, compared to regions relying more on hydropower. The results show that electric two-wheelers emit several times lower pollution per kilometer than motorcycles and cars, have comparable emission rates to buses and higher emission rates than bicycles. Lead is one pollutant on which electric two-wheelers perform poorly, because of their use of lead acid batteries.     

Integrated analysis of GHGs and public health damage mitigation for developing urban road transportation strategies

This study attempts to present an urban road transportation strategy focusing on the mitigation of both GHGs emission and public health damage, taking Xiamen City as a case study. We developed a Public Health and GHGs Emission model to estimate the impacts of direct energy-consumption-related GHGs emissions and public health damage in Xiamen’s road transportation strategies from 2008 to 2025, considering the environmental benefits and economic costs. Two scenarios were designed to describe future transportation strategies for Xiamen City, and mitigation potentials for both GHGs emission and public health costs were estimated from 2008 to 2025 under a series of options. The results show that enacting controls on private vehicles would be most effective to GHGs mitigation, while enacting controls on government and rental vehicles would contribute the most to NO₂ and PM2.5 reductions. Compared with the Business as Usual scenario, the Integrated scenario would achieve about a 68% energy consumption reduction and save 0.23 billion yuan (95% CI: 0.16, 0.32) in health costs in 2025. It is clear that integrated and advisable strategies need to mitigate the adverse impacts of urban road vehicles on GHGs emissions and public health and economic costs, particularly in regions of rapid urbanization.     

多年冻土区公路路面路基管理系统设计

我国多年冻土地区公路受气温及水分变化等影响,公路病害发生严重。为了使公路养护部门合理利用资金,最大限度避免冻土病害,有必要建立冻土区公路路基路面评价预测系统。文章介绍了冻土区公路路基的评价指标和评价方法。在常规路基路面评价预测的方法上,还使用了马尔可夫等预测方法,以适合冻土区公路路面破坏机理复杂、影响因素多的实际情况。     

Quantifying the environmental and economic benefits of cooperation: A case study in temperature-controlled food logistics

Inefficient road transportation causes unnecessary costs and polluting emissions. This problem is even more severe in refrigerated transportation, in which temperature control is used to guarantee the quality of the products. Organizing logistics cooperatively can help decrease both the environmental and the economic impacts. In Joint Route Planning (JRP) cooperation, suppliers and customers jointly optimize routing decisions so that cost and emissions are minimized. Vendor Managed Inventory (VMI) cooperation extends JRP cooperation by optimizing routing and inventory planning decisions simultaneously. However, in addition to their economic advantages, VMI and JRP may also yield environmental benefits. To test this assertion, we perform a case study on cooperation between a number of supermarket chains in the Netherlands. The data of this case study are analyzed to quantify both the economic and environmental benefits of implementing cooperation via JRP and VMI, using vehicle routing and an inventory routing models. We found that JRP cooperation can substantially reduce cost and emissions compared with uncooperative routing. In addition, VMI cooperation can further reduce cost and emissions, but minimizing cost and minimizing emissions no longer result in the same solution and there is a trade-off to be made.     

新老路基结合部处治技术

我国已进入道路改扩建高峰期,路基拓宽、新老路基结合面临诸多技术难题。本项目通过多种技术手段相结合的方法,对路基拓宽工程的技术特征和工程问题、新老路基不协调变形的特点、计算方法及对路面结构的影响、拓宽路基的设计理论和方法、新老路基结合部处治的原理、方法和施工技术进行了深入系统的研究,提出了新老路基不协调变形的计算方法,为公路路基拓宽工程的设计和施工提供了技术基础。     

Life cycle assessment of heated apron pavement system operations

Heated pavement systems (HPS) offer an attractive alternative to the cumbersome process of removing ice and snow from airport pavements using traditional snow removal systems. Although snow and ice removing efficiency and economic benefits of HPS have been assessed by previous studies, their environmental impact is not well known. Airport facilities offering public or private services need to evaluate the energy consumption and global warming potential of different types of snow and ice removal systems. Energy usage and emissions from the operations of hydronic heated pavement system using geothermal energy (HHPS-G), hydronic HPS using natural gas furnace (HHPS-NG), electrically heated pavement system (EHPS), and traditional snow and ice removal system (TSRS) are estimated and compared in this study using a hybrid life cycle assessment (LCA). Based on the system models assessed in this study, HPS application in the apron area seems to be a viable option from an energy or environmental perspective to achieve ice/snow free pavement surfaces without using mechanical or chemical methods. TSRS methods typically require more energy and they produce more greenhouse gas (GHG) emissions compared to HPS during the operation phase, under the conditions and assumptions considered in this study. Also, HPS operations require less energy and have less GHG emissions during a snow event with a smaller snowfall rate and a larger snow duration.     

Impacts of trade related sustainability strategies on freight transportation: Modelling framework and application for France

The circular and functional economies are being presented in the literature as potential strategies for future sustainable societies. In terms of the consequences for supply chains, they will promote a much more dispersed and diversified, local and network based usage of goods than the current economy, which is comparatively linear, concentrated, long distance oriented and scale economy based. A gap in the literature is the assessment of the effects of these systems on freight transport flows. In our paper, we present a first attempt at estimating this impact using freight transport scenario building and quantitative modelling. In order to translate the main parameters that characterize these systems into factors determining freight transportation volumes, we develop a framework based on a typology of goods categories describing functional and spatial proximity between producers and consumers. In order to simulate changes in the economy, we develop scenarios for the shifting of goods from one category to another and, additionally, include internalization policies that should guide their realization. We calculate the impacts on freight flows using a new interregional transport model for France that includes distribution chains and produces estimates of external costs of transport. Our results show that circular and functional economies could lead to a 2–5% reduction of air pollutant emissions and up to a 14–26% reduction if combined with the internalization of external costs. The scenario with ongoing mass production for differentiated demand is found to lead to a 5% increase of environmental impacts compared to the baseline.     

Strategies to achieve deep reductions in metropolitan transportation GHG emissions: the case of Philadelphia

ABSTRACT

This paper investigates strategies that could achieve an 80% reduction in transportation emissions from current levels by 2050 in the City of Philadelphia. The baseline daily lifecycle emissions generated by road transportation in the Greater Philadelphia Region in 2012 were quantified using trip information from the 2012 Household Travel Survey (HTS). Emissions were projected to the year 2050 accounting for population growth and trends in vehicle technology for both the Greater Philadelphia Region and the City of Philadelphia. The impacts of vehicle technology and shifts in travel modes on greenhouse gas (GHG) emissions in 2050 were quantified using a scenario approach. The analysis of 12 different scenarios suggests that 80% reduction in emissions is technically feasible through a combination of active transportation, cleaner fuels for public transit vehicles, and a significant market penetration of battery-electric vehicles. The additional electricity demand associated with greater use of electric vehicles could amount to 10.8 TWh/year. The use of plug-in hybrid electric vehicles (PHEV) shows promising results due to high reductions in GHG emissions at a potentially manageable cost.     

Commuters’ behavior towards upgraded bus services in Greater Beirut: Implications for greenhouse gas emissions,social welfare and transport policy

Climate change is one of the most critical environmental challenges faced in the world today. The transportation sector alone contributes to 22% of carbon emissions, of which 80% are contributed by road transportation. In this paper we investigate the potential private car greenhouse gas (GHG) emissions reduction and social welfare gains resulting from upgrading the bus service in the Greater Beirut Area. To this end, a stated preference (SP) survey on mode switching from private car to bus was conducted in this area and analyzed by means of a mixed logit model. We then used the model outputs to simulate aggregate switching behavior in the study area and the attendant welfare and environmental gains and private car GHG emissions reductions under various alternative scenarios of bus service upgrade. We recommend a bundle of realistic bus service improvements in the short term that will result in a reasonable shift to buses and measurable reduction in private car emissions. We argue that such improvements will need to be comprehensive in scope and include both improvements in bus level of service attributes (access/egress time, headway, in-vehicle travel time, and number of transfers) and the provision of amenities, including air-conditioning and Wi-Fi. Moreover, such a service needs to be cheaply priced to achieve reasonably high levels of switching behavior. With a comprehensively overhauled bus service, one would expect that bus ridership would increase for commuting purposes at first, and once the habit for it is formed, for travel purposes other than commuting, hence dramatically broadening the scope of private car GHG emissions reduction. This said, this study demonstrates the limits of focused sectorial policies in targeting and reducing private car GHG emissions, and highlights the need for combining behavioral interventions with other measures, most notably technological innovations, in order for the contribution of this sector to GHG emissions mitigation to be sizable.     

稀浆封层修复技术在港区道路养管中的应用

根据天津港"美丽港口一号工程"的要求,各港区需要进行洒水降尘。南疆港区南港路由于不间断洒水,使得路面长期处于潮湿状态,沥青粗细骨料发生离散,加上大型运输车辆的往复载荷作用,局部路面出现磨损、开裂和破坏现象,破损面积不断扩大。为防止路面进一步破坏,并使修复后的路面防水、防滑、耐磨和平整,工程采用乳化沥青稀浆封层对南港路破损路段进行修复,完工后有效保证了道路的正常使用,确保人员和车辆的通行安全,获得良好的经济和社会效益。     

Sustainable cold supply chain management under demand uncertainty and carbon tax regulation

Increasing awareness of sustainability in supply chain management has prompted organizations and individuals to consider environmental impacts when managing supply chains. The issues concerning environmental impacts are significant in cold supply chains due to substantial carbon emissions from storage and distribution of temperature-sensitive product. This paper investigates the impact of carbon emissions arising from storage and transportation in the cold supply chain in the presence of carbon tax regulation, and under uncertain demand. A two-stage stochastic programming model is developed to determine optimal replenishment policies and transportation schedules to minimize both operational and emissions costs. A matheuristic algorithm based on the Iterated Local Search (ILS) algorithm and a mixed integer programming is developed to solve the problem in realistic sizes. The performance and robustness of the matheuristic algorithm are analyzed using test instances in various sizes. A real-world case study in Queensland, Australia is used to demonstrate the application of the model. The results highlight that higher emissions price does not always contribute to the efficiency of the cold supply chain system. Furthermore, the analyses indicate that using heterogeneous fleet including light duty and medium duty vehicles can lead to further cost saving and emissions reduction.     

基于LEAP模型的城市客运交通能耗和污染物排放预测

我国交通运输业能源消耗量与污染物排放量日益增多,交通部门的节能减排措施研究迫在眉睫。本论文基于LEAP模型构建了某城市客运交通能耗与污染物排放模型,并预测了基准情景、政策情景、技术情景及综合情景下该城市客运交通2014-2030年之间的能耗及污染物排放情况。研究表明,三种发展情景下该城市能源需求量及污染物排放较基准情景均有减少,其中综合情景效果最佳,综合情景在2030年的能源消耗与CO2排放可分别减少56.98%和54.55%,CO、HC、NOx与PM2.5可分别减排67.39%、67.27%、51.43%与75.38%。因此应大力发展公共交通,尤其是轨道交通,同时限制私家车的无节制发展,并推广节能环保技术以改善终端利用层次能源结构。     

Reducing CO2 emissions in temperature-controlled road transportation using the LDVRP model

Temperature-controlled transport is needed to maintain the quality of products such as fresh and frozen foods and pharmaceuticals. Road transportation is responsible for a considerable part of global emissions. Temperature-controlled transportation exhausts even more emissions than ambient temperature transport because of the extra fuel requirements for cooling and because of leakage of refrigerant. The transportation sector is under pressure to improve both its environmental and economic performance. To explore opportunities to reach this goal, the Load-Dependent Vehicle Routing Problem (LDVRP) model has been developed to optimize routing decisions taking into account fuel consumption and emissions related to the load of the vehicle. However, this model does not take refrigeration related emissions into account. We therefore propose an extension of the LDVRP model to optimize routing decisions and to account for refrigeration emissions in temperature-controlled transportation systems. This extended LDVRP model is applied in a case study in the Dutch frozen food industry. We show that taking the emissions caused by refrigeration in road transportation can result in different optimal routes and speeds compared with the LDVRP model and the standard Vehicle Routing Problem model. Moreover, taking the emissions caused by refrigeration into account improves the estimation of emissions related to temperature-controlled transportation. This model can help to reduce emissions of temperature-controlled road transportation.     

GHG-emission models for assessing the eco-friendliness of road and rail freight transports

Intermodal rail/road transportation is an instrument of green logistics, which may help reducing transport related greenhouse gas (GHG) emissions. In order to assess the environmental impact of road and rail transports, researchers have formulated very detailed microscopic models, which determine vehicle emissions precisely based on a vast number of parameters. They also developed macroscopic models, which estimate emissions more roughly from few parameters that are considered most influential. One of the goals of this paper is to develop mesoscopic models that combine the preciseness of micro-models while requiring only little more information than macro-models. We propose emission models designed for transport planning purposes which are simple to calibrate by transport managers. Despite their compactness, our models are able to reflect the influence of various traffic conditions on a transport’s total emissions. Furthermore, contrasting most papers considering either the road or the rail mode, we provide models on a common basis for both modes of transportation. We validate our models using popular micro- and macroscopic models and we apply them to artificial and real world transport scenarios to identify under which circumstances intermodal transports actually effect lower emissions. We find that travel speed and country-specific energy emission factors influence the eco-friendliness of intermodal transports most severely. Hence, the particular route chosen for a transnational intermodal transport is an important but so far neglected option for eco-friendly transportation.