A local model for the simulation of two–dimensional spilling breaking waves

A numerical model for the simulation of two dimensional spilling breaking waves is described. It is derived from a previous model which, in turn, takes its underlying ideas from the Cointe and Tulin theory of steady breakers. With respect to the former model, the present one is local, i.e., the inception, extension, and geometry of the breakers are determined through the local shape of the water surface. The model has been implemented in a RANSE code, which was developed for the simulation of ship flows, through a modification in the boundary conditions. This yields a simple and effective way to reproduce the breakers influence on the underlying flow. The resulting code has been used to simulate the flow past a submerged hydrofoil. The numerical results are compared with those of the previous model and with the experimental data obtained by Duncan.     

Added resistance acting on hull of a non ballast water ship

In this paper, added resistances acting on a hull of non ballast water ship(NBS) in high waves is discussed. The non ballast water ships were developed at the laboratory of the authors at Osaka Prefecture University, Japan. In the present paper, the performances of three kinds of bow shapes developed for the NBS were theoretically and experimentally investigated to find the best one in high waves. In previous papers, an optimum bow shape for the NBS was developed in calm water and in moderated waves. For a 2 m model for experiments and computations, the wave height is 0.02 m. This means that the wave height is 15% of the draft of the ship in full load conditions. In this paper, added resistances in high waves up to 0.07 m for a 2 m model or 53% of the full load draft are investigated. In such high waves linear wave theories which have been used in the design stage of a ship for a long time may not work well anymore, and experiments are the only effective tool to predict the added resistance in high waves. With the computations for waves, the ship is in a fully captured condition because shorter waves, λ/Lpp0.6, are assumed.     

Numerical study on breaking phenomena of ships’ waves in narrow and shallow waterways

The environmental impact of a ships waves, such as the risk of erosion of coasts and riverbanks, and unacceptable ship movements in a restricted waterway, is now a significant ship design criterion. Therefore, it is necessary to predict ship-wave phenomena accurately in a restricted waterway. In this study, a numerical investigation of the breaking phenomena of a ships waves in restricted waterways was carried out. Incompressible Navier–Stokes and continuity equations were employed. The equations are discretized by a finite-difference method in a curvilinear coordinate system. The interface capturing method was applied to simulation of a ships waves, including wave-breaking. A modification of the level-set method is proposed to find the free surface shape clearly and without difficulty of the implemation of the boundary conditions for the distance function. In order to obtain a high resolution of wave height, a constrained interpolated profile (CIP) algorithm is adopted. In order to check the advantage of the CIP method, computations by two numerical methods, the CIP and the 3rd-order up-wind scheme, were compared. The computations for a Wigley hull in restricted waterways were performed and compared with experiments. The phenomena of ships waves in restricted waterways are discussed in order to understand the mechanism of wave-breaking in relation to the change in water depth along a waterway.     

基于混合两步法的船舶砰击载荷预报研究

文章针对船舶结构设计时重点关注的艏部砰击载荷问题,综合考虑计算效率及精度,提出了基于势流理论和计算流体力学方法的混合两步法。第一步,采用三维势流理论预报波浪中有航速船舶的运动响应,分析船波相对运动;第二步,根据预报砰击载荷所在位置的船体横剖面,建立等截面的三维立体模型,采用基于有限体积法与动网格技术的计算流体力学方法,基于第一步得到的相对运动结果模拟落体入水过程,计算砰击压力。使用该两步法预报了某超大型油轮在压载工况顶浪航行时候的艏部砰击压力,并讨论了相对运动和砰击压力的时域历程规律。文中数值预报结果得到了水池模型实验的验证,表明该方法的可行性和预报结果的合理性。     

波浪对船舶非线性横摇阻尼的影响

横摇非线性阻尼通常是在静水中进行横摇衰减试验确定。本文通过在波浪水池中进行不规则波的船模横摇衰减试验，研究了波浪对非线性横摇阻尼的影响。研究发现波浪的存在使横摇阻尼线性部分减少，非线性部分增加；采用随机减量法得到非线性横摇阻尼时，门槛值不同所得到的阻尼也不相同，一般说来，门槛值越大，阻尼非线性成分增加，而线性成分减少。     

具有淹水舱的舰船横摇运动建模探讨

舰船在风浪中横摇运动特性是影响舰船航行安全的主要因素,而当舰船由于碰撞、搁浅等意外事故造成船体破损进水后,具有淹水舱的舰船在风浪中的横摇运动将变得更加复杂,更加危险,文章系统地分析了具有淹水舱的舰船在波浪中横摇运动时船和舱内水的能量耦合作用,根据拉格朗日方程建立了具有淹水舱的舰船横摇运动两自由度微分方程,并在此基础上,用Melnikov方法对某实船破损进水后的横摇运动进行了非线性分析,验证了所建模型的实用性,为进一步分析破损进水舰船在风浪中的横摇运动特性提供了可行的数学模型.     

分段式尾压浪板对高速船阻力性能的影响

基于CFD技术,以排水型高速船Model 5b为模型,寻求改善高速船阻力性能的尾压浪板新形式。首先尾压浪板新形式的确定在静水条件下进行,然后在波浪条件下验证该压浪板的阻力性能。基于CFD软件建立三维数值波浪水池,静水条件下采用切割体网格技术预报船模的阻力性能。波浪条件下数值水池入口采用直接造波方法,尾部采用人工阻尼消波方法,自由面采用VOF方法处理,采用重叠网格技术预报船模的阻力性能以及运动响应。确定一种比常规压浪板阻力性能优良的分段式压浪板,为船舶节能附体的研究提供参考。     

Difference in ship motion and wave load in long and short crested irregular waves北大核心CSCD

[Objective]To investigate ship motion and load responses in realistic 3D waves and overcome the limitations of the traditional 2D wave assumption, this paper develops a method for predicting ship motion and load responses in short-crested waves. [Method]The long- and short-term responses of ship motion and load in long- and short-crested waves are numerically predicted using the spectral analysis and statistical probability methods, respectively. The influence of directional function on ship response is also numerically analyzed. Moreover, tank model tests and a large-scale model sea trial are comparatively conducted to validate the difference between ship response and statistics in long- and short-crested irregular waves. [Results]The results show that when navigating against the waves in the same sea condition, the long-crested wave assumption overestimates the statistical mean value of ship load response, but underestimates extreme load in real seas. For long-crested waves, the ship motion and acceleration power spectrum is concentrated around a certain frequency band. [Conclusion]Ship motion and load responses in realistic 3D waves are significantly different from those in 2D long-crested waves. The directional function of short-crested waves also has a significant effect on ship motion and load responses. © 2023 The Author(s).     

采用Green-Naghdi方程和有限元法计算浅水船波

采用波动方程／有限元法求解Green-Naghdi(G-N)方程计算船舶在有限水深区域的兴波和波浪阻力。把行驶船舶对水面的扰动作为移动压力直接加在Green-Naghdi方程里，以描述运动船体和水面的相互作用，并经此来计算不面波动、船底水动压力和波浪阻力。G－N方程比浅水方程增加一个非线性的频散项，以补充有限水深对浅水船波的影响。采用随船运动网格的有限方法，以Series 60 CB=0.6船作为算例给出浅水船波的计算结果，并与浅水方程的结果进行了比较。计算结果表明，当船速小于临界速度时，由于频散的影响，G－N方程级出的船后尾波波高比浅水方程的结果大，同时波浪阻力也比浅水方程的结果有所提高。当船速大于临界速度时，G－N方程的计算结果与浅水方程基本相同，频率散射无明显影响。     

基于三维势流理论的耐波性数值预报

准确预报船体运动响应对于砰击等波浪载荷的计算以及合理结构设计具有重要意义。船舶在大幅波浪中的运动呈明显的非线性,而现阶段耐波性预报多采用线性切片方法。三维水动力分析软件 WASIM基于时域势流理论,采用 Rankine面元法预报船舶在波浪中的运动响应,并考虑了多种非线性因素。本文以标模 DTMB5512为对象,采用 WASIM预报其在不同航速下的耐波性,并与基于线性切片理论的计算结果和模型试验结果进行对比。结果表明：利用 WASIM计算得到的船体运动响应比其他方法更接近试验值,合理体现了船舶在风浪中的实际耐波性能。因此,利用 WASIM能够较好地评估船舶在波浪中的非线性耐波特性。     

绕船体自由面周围三维粘性流场的数值模拟

本文采用有限体积法通过求解不可压缩的雷诺平均(RANS)方程数值模拟了包括兴波的三维船体周围的粘性流场,湍流模式使用了子网格尺度模式(SGS)和Baldwin-Lomax模式相结合的混合模式.对于自由表面的处理,采用了任意拉格朗日-欧拉方法,网格为不仅与物体表面贴体,而且与自由表面贴体的动网格,即随着自由表面的变化要不断地重新划分网格.虽然此方法需要很长的计算时间,但能较好地描述船体的兴波情况.本文计算了系列60船模在Fn=0.316,Re=1.9×106时带自由面的粘性流场,计算结果与试验结果吻合较好.，An finite - volume method solving of incompressible RANS Equations is developed for the numeri-cal simulation of three - dimensional viscous flow with free - surface about a ship. A hybrid turbulence mod-el by combining the sub - grid scale (SGS) model and the Baldwin- Lomax model is used in this pa-per. The arbitrary - Lagrange - Euler formulation is devised for the treatment of free surface boundary condi-tion. The boundary - fitted coordinate system is fitted not only to the ship hull surface but also to the freesurface, so the computational grid is regenerated to follow the free surface deformation. Although this methodneeds spend much longer computational time, but it can fairly display wave pattern made by a ship. The nu-merical simulation has been carried out for viscous flow with free surface past Series 60 ship hull at Fn =0. 316, Re = 1.9 × 106. The computed results are in reasonable agreement with experimental measure-ments.     

PIV velocity field measurements of flow around a KRISO 3600TEU container ship model

The main purpose of this investigation was to demonstrate a useful application of the particle image velocimetry (PIV) method to analyze the complex flow characteristics around a ship. For a sample illustration, the KRISO 3600TEU container ship model was chosen. The flow structure in the stern and near-wake region of the model has been investigated experimentally in a circulating water channel. Instantaneous velocity fields measured by the PIV velocity field measurement technique have been ensemble-averaged to give details of flow structures such as the spatial distributions of the local mean velocity, vorticity, and turbulent kinetic energy. The free-stream velocity was fixed at U _o = 0.6m/s, and the corresponding Reynolds number based on the length between perpendiculars was about 9.0 × 10⁵. The container ship model shows a complicated three-dimensional flow structure in the stern and near-wake regions. The PIV results clearly revealed the formation of large-scale bilge vortices in the stern region and their effect on the flow in the near-wake. The results shown here provide valuable information for hull form design and the validation of viscous ship flow codes and of turbulence models.     

A unified seakeeping and maneuvering analysis of ships in regular waves

The behavior of a ship in regular waves during maneuvering was studied by using a two-time scale model. The maneuvering analysis was based on Söding’s (Schiffstechnik 1982; 29:3–29) nonlinear slender-body theory generalized to account for heel. Forces and moments due to rudder, propeller, and viscous cross-flow follow from the state-of-the-art procedures. The developed unified theory of seakeeping and maneuvering was verified and validated for calm water by comparing it with experimental and calculated zigzag and circle maneuvers. Linear wave-induced motions and loads were determined by generalizing the Salvesen-Tuck-Faltinsen (Trans SNAME 1970; 78:250–287) strip theory. The mean second-order wave loads in incident regular deep water waves in oblique sea conditions were estimated by the potential flow theories of Faltinsen et al. (Proc 13th Symp Naval Hydrody 1980), Salvesen (Proc Intl Symp Dynam Mar Vehicl Struct Wave 1974), and Loukakis and Sclavounos (J Ship Res 1978; 22:1–19). The considered theories cover the whole range of important wavelengths. Comparisons between the different mean second-order wave load theories and available experimental data were carried out for different ship hull forms when the ship was advancing forward on a straight course. The mentioned methods have been incorporated into the maneuvering model. Their applicability from the perspective of the maneuvering ability of the selected types of ships was investigated in given wave environments. The wave conditions are valid for realistic maneuvering cases in open coastal areas. It was demonstrated that the incident waves may have an important influence on the maneuvering behavior of a ship. The added resistance, mean second-order transverse force, and yaw moment also play important roles.     

Investigation of springing in ship structures using experimental methods and 3-D hydroelastic theory

Large and long ships experience springing behavior. Depending on the trade routes and design of such ocean-going ships, wave-induced vibrations may be due to springing and whipping effects. In this paper, we address the wave-induced vibrations in an ultra-large ore carrier under fully loaded and ballast conditions. The experimental measurements from tests performed using a flexible model of the ship were compared with the numerical predictions from 3-D hydro-elastic theory (THAFTS) (Wu, Hydroelasticity of floating bodies. PH.D thesis, Brunel University, 1984). The measurements showed multiple frequencies between the encountered wave frequency and the 2-node bending frequency that occurred only in ballast conditions, whereas the springing vibrations were more apparent with forward speed under ballast conditions in both regular and irregular waves. The numerical method predicted the vertical bending moment quite well in the fully loaded condition but underestimated it in the ballast condition. This result was primarily due to an inability to capture the prediction of the multiple frequencies between the encountered wave frequency and the 2-node bending frequency. Using THAFTS, a new ship form with a deep draft was introduced, and this vessel was shown to reduce springing vibrations.     

Hydrodynamics of a body floating in a two-layer fluid of finite depth. Part 1. Radiation problem

A linearized 2-D radiation problem was considered for a general floating body in a two-layer fluid of finite depth. A boundary integral-equation method was developed for directly computing the velocity potential on the wetted surface of a body which is immersed in both the upper and lower layers as a general case. To do this, appropriate time-harmonic Greens functions were derived, and an efficient numerical method of evaluating those functions is proposed. Based on Greens theorem, hydrodynamic relations such as the energy-conservation principle were derived theoretically for a case of finite depth, and we confirm that those relations are satisfied numerically with very good accuracy. Experiments were also carried out using water and isoparaffin oil as the two fluids and a Lewis-form body. Measured results for the added mass, the damping coefficient, and the amplitude of the generated waves are compared with the computed results, and a favorable agreement is found.     

海船船行波对游艇航行安全影响试验

采用不同比尺的物理模型,研究了3万t级海船及游艇在进出港航道中航行产生的船行波特性;利用造波机模拟海船船行波,试验分析了海船船行波对游艇航行安全的影响。研究表明,当航道两侧挡沙堤出水后,对海船航行具有较明显的限制性航道特点;海船航速8节时在游艇航道中产生的最大波高为0.46m,对单游艇航行安全没有影响;当海船和2艘游艇三者同时相遇时,游艇航速宜小于等于10节。     

船舶在波浪中操纵运动仿真

本文研究了双浆双舵船在规则波中的回转运动，首先进行了约束模型试验，得到了操纵运动数学模型中的水动力系数，然后，进行了静水操纵运动数值仿真，并与自航模型试验结果进行了比较。最后，预报船舶在规则波中的回转运动，对一些影响回转运动的因素进行了讨论。     

船舶表面点砰击压力的预报方法

本文基于线性切片理论,结合船舶在波浪中运动时历的数值模拟方法,考虑船舶表面点的运动与波浪的相位关系,给出了船舶表面点的入水速度的预报方法,再运用二维剖面入水砰击压力与入水速度之间的关系,对船舶表面入水点的砰击压力进行了预报.最后,给出了一条船的计算实例.     

船体在波浪中的非线性水动压力

本文提出了一个预报船体在波浪中大幅运动时非线性水动压力场的二维时域理论。船体扰动势用时域自由面格林函数和在入射波下的瞬时湿表面上的分布源求解；与非线性水动压力场相匹配的船体运动用差分法求得。为提高计算效率和避免数值过程发散，采用了改进的数值模型和方案。通过线性理论计算与模型试验结果的比较，指出了线性切片理论在预报水动压力场时的不足，水动压力与波高的非线性关系及正负水动压力沿船体表面的分布在Wigley船的计算比较中得到了说明。初步计算表明，该理论的实用化发展前景是令有鼓舞的。相应的计算机程序可在PC机上运行。     

波浪中母船干扰下潜水员梯的运动及水动力特性分析

潜水员梯是通过销轴连接在母船舷侧为潜水员执行潜水作业时上下船的平台,为保证在波浪中使用时的安全性,对其波浪作用力、运动响应及销轴处的动作用载荷设计有较高要求。为研究母船干扰下潜水员梯的动态响应特性,采用基于深水格林函数为积分内核的边界元方法,先计算母船及潜水梯这一整体的运动响应及其平均湿表面的辐射和绕射压力分布,依据刚体运动合成原理求解得到潜水梯重心处的运动。再以潜水员梯为研究对象,采用压力积分方法获得潜水员梯的波浪力作用,并将其运动、波浪力和销轴处的作用力联立构成动力学平衡方程,逆向求解出销轴处的动作用力。基于上述思路,系统研究了波长、航速及潜水员梯与母船相对位置变化时潜水员梯的运动、波浪作用力及销轴处作用力的变化规律,为潜水员梯的布置、销轴的选型及潜水作业时母船的操纵可提供指导意义。