含点蚀损伤船体加筋板在纵向压力下的极限强度

针对老龄化船舶结构上的点状腐蚀,利用非线性有限元方法进行计算,分析304个船体加筋板的极限强度,探讨带板柔度、加强筋柔度、腐蚀面积比和腐蚀深度比对纵向压力下含点蚀损伤船体加筋板极限强度的影响,拟合出点状腐蚀下船体加筋板极限强度折减公式并对其适用性进行验证,研究结果具有一定的工程参考意义和价值。     

基于J积分的含裂纹加筋板在单轴拉伸载荷下的极限强度计算

为研究含裂纹加筋板的极限拉伸强度,本文建立一系列不同长细比、不同裂纹长度、不同裂纹位置的含裂纹加筋板有限元模型,并基于J积分理论对其在单轴拉伸载荷下的极限强度进行了计算。结果发现含裂纹加筋板极限拉伸强度随加筋板长细比的增大略有减小,但减小的程度并不明显;含裂纹加筋板极限拉伸强度随裂纹长度的增大而减小,且减小的幅度逐渐增大;加强筋上的裂纹对含裂纹加筋板极限强度的影响小于底板上的裂纹,而裂纹同时出现在底板和加强筋上时对含裂纹加筋板极限拉伸强度的影响最大。表明含贯穿型裂纹的加筋板在单轴拉伸载荷下的剩余强度对加筋板长细比不敏感,而对裂纹长度较为敏感。     

双向正交密加筋板的极限强度预报

采用数值分析方法,对一系列单轴受压的双向正交密加筋板进行了有限元非线性计算。基于有限元数值计算结果和正交异性板理论,引入纵向加强筋的柔度λx、横向加强筋的柔度λy以及密加筋板的柔度β这3个参数变量,提出了关于这3个参数变量的双向正交密加筋板极限强度预报公式。对3种类型加强筋的双向正交密加筋板的极限强度分析结果表明,预报公式结果与有限元计算结果的绝对误差很小,能准确预报双向正交密加筋板的极限强度。     

Ultimate strength design of stiffened plates under axial compression and bending

The basis for design of stiffened plates under longitudinal compression is outlined and predictions using several codes are compared against numerical results from an inelastic beam-column formulation and test results. In order to explore the inherent differences in column behaviour separately from discrepancies arising due to plate panel behaviour, the code predictions are re-evaluated adopting a common plate panel effective width formulation. On this basis, a critical review of code methods is made and some modifications are proposed.

The effect of the magnitude and direction of applied uniform bending on the axial capacity of stiffened plates is investigated by comparing two alternative design approaches, namely an interaction equation and a method based on the Perry equation, against results from numerical analyses and from rigid plastic theory. The interaction equation is invariably more conservative than the Perry approach but its simplicity tends to be convenient for routine design applications. Finally, results of numerical analyses, together with experimental results from previous studies, on continuous stiffened plates under combined axial compression and lateral pressure are presented and available design guidance is discussed.     

A Simplified Model for the Effect of Weld-Induced Residual Stresses on the Axial Ultimate Strength of Stiffened Plates

The present work investigates the compressive axial ultimate strength of fillet-welded steel-plated ship structures subjected to uniaxial compression, in which the residual stresses in the welded plates are calculated by a thermo-elasto-plastic finite element analysis that is used to fit an idealized model of residual stress distribution. The numerical results of ultimate strength based on the simplified model of residual stress show good agreement with those of various methods including the International Association of Classification Societies (IACS) Common Structural Rules (CSR), leading to the conclusion that the simplified model can be effectively used to represent the distribution of residual stresses in steel-plated structures in a wide range of engineering applications. It is concluded that the widths of the tension zones in the welded plates have a quasi-linear behavior with respect to the plate slenderness. The effect of residual stress on the axial strength of the stiffened plate is analyzed and discussed.     

焊接诱导的残余应力对加劲板轴向极限强度影响的简化模型研究（英文）

The present work investigates the compressive axial ultimate strength of fillet-welded steel-plated ship structures subjected to uniaxial compression, in which the residual stresses in the welded plates are calculated by a thermo-elasto-plastic finite element analysis that is used to fit an idealized model of residual stress distribution. The numerical results of ultimate strength based on the simplified model of residual stress show good agreement with those of various methods including the International Association of Classification Societies(IACS) Common Structural Rules(CSR), leading to the conclusion that the simplified model can be effectively used to represent the distribution of residual stresses in steel-plated structures in a wide range of engineering applications. It is concluded that the widths of the tension zones in the welded plates have a quasi-linear behavior with respect to the plate slenderness. The effect of residual stress on the axial strength of the stiffened plate is analyzed and discussed.     

New simplified approach to collapse analysis of stiffened plates

A new simplified model for collapse analysis of stiffened plates is developed in the framework of the idealized structural unit method (ISUM). By idealizing material and geometrical nonlinearities, larger structural units are defined as an element in ISUM than in conventional finite element analysis (FEA). The proposed stiffened plate model consists of ISUM plate elements and beam-column elements. The formulation of the plate element is performed by introducing accurate shape functions to simulate the buckling/plastic collapse behaviour of plate panels. Combining plate and beam-column elements allows for both local buckling of the plate panel and overall buckling of the stiffener.Fundamental collapse modes of plate panels and stiffened plates are investigated by conventional FEA. According to the observed characteristics, the new simplified model is formulated. Comparisons with FEA demonstrate the accuracy of the simplified model and its high applicability to typical stiffened plates in marine structures.     

Experimental and analytical investigations on the response of stiffened plates subjected to lateral collisions

Rational structural design of ships or offshore platforms against collisions requires prediction of the extent of damage to stiffened plates generated by lateral impact. In predicting the extent of collision damage, most researchers employ numerical analysis methods using commercial software packages. Like other structural problems, any nonlinear dynamic analysis methods should be substantiated with relevant test data prior to being employed for design. Unfortunately, full-scale collision tests on marine structures are very rare. Still, results from collision tests on marine structural elements can help to substantiate theoretical methods for collision analyses. Lateral collision test data for unstiffened plates are available, but it is difficult to find results from tests on stiffened plates in the open literature. In this paper, the results of lateral collision tests on 33 stiffened plates are reported. A simplified analytical method is developed for the prediction of the extent of damage to stiffened plates due to lateral collisions and this method is substantiated with the test results. Also proposed is a simple criterion with which the occurrence of crack damage can be judged.     

Patran的PCL语言在板格和加筋板极限强度计算中的运用

用Fortran编写程序生成Patran的.ses文件,可将任意指定的初始挠度施加到要计算分析极限强度的光板和加筋板结构模型中去.具体分析6块光板和4块加筋板结构的极限强度,计算结果表明,该方法可以模拟任意复杂的变形形式,从而更加准确地计算和评估加筋板结构的极限强度.     

推力和横向压力作用下加筋板破坏分析的理想化结构单元法

理想化结构单元法(ISUM)已经成为评估结构系统中承受载荷能力的一个有效工具.本文给出了最新的ISUM板元公式,并考虑了双轴向推力和横向载荷对板元的加载.为了精确地模拟加筋板的性能,分别用梁-柱元和板元制作了肋材和板材的模型.与有限元分析(FEA)的比较表明该方法对解决加筋板在横向压力和推力载荷下的问题是适用的.对箱形桁材的四点弯曲试验的分析表明与试验数据吻合良好.     

Numerical investigation on the ultimate strength behaviour and assessment of continuous hull plate under combined biaxial cyclic loads and lateral pressure

The ultimate strength of continuous hull plate under combined biaxial cyclic loads and lateral pressure is investigated in the present paper by using nonlinear finite element method. Geometric nonlinearity due to large deflection and material nonlinearity induced by kinematic hardening and isotropic hardening are both accounted for. A parametric study is designed and completed to examine the longitudinal ultimate compressive strength behaviours in the cycles on the basis of a large number of load-shortening curves. Effects of series of parameters especially the plate slenderness ratio, transverse cyclic compression, lateral pressure and cycle number are analyzed with details. It is found that the strength characteristic and collapse mode are highly affected by the coupling influence of the mentioned factors as well material behaviours. A dimensionless unified formulation as a function of the decisive factors is empirically proposed to accurately assess the ultimate strength of continuous hull plate in various cycles.     

加筋板格高级屈曲分析技术研究及软件开发

文章给出了基于弹性大挠度理论和刚塑性分析的加筋板格高级屈曲分析方法(EPM),该方法包括五种失效模式,即正交加筋板格整体屈曲、纵向加筋子板格整体屈曲、纵向加筋和带板的局部屈曲或屈服、纵向加筋的侧倾以及全部屈服,可以考虑初始挠度和残余应力的影响以及双向压缩和侧向载荷的联合作用。以EPM方法为核心开发了加筋板格高级屈曲分析软件系统,包括任务管理、数据输入、屈曲分析、结果查看、能力曲线和文件分析等六个模块。为验证EPM方法的精度进行了系列纵向加筋和正交加筋板格试验模型的比较计算,并计算了四种典型加筋板格的双向应力能力曲线,与板格极限状态分析（PULS）软件和协调共同结构规范（HCSR）方法进行了比较分析。结果表明EPM方法可以分析联合载荷等因素对加筋板格极限强度的影响,文中开发的软件系统可用于加筋板格高级屈曲分析。     

Ultimate collapse tests of stiffened-plate ship structural units

An increasingly popular approximate method for assessing ship hull girder ultimate strength is to combine the individual elasto-plastic load-carrying characteristics of each single stiffened-plate unit comprising the ship hull cross section. In order to evaluate methods (numerical and experimental) for developing the load-carrying characteristics (load–shortening curves), a full-scale testing system was designed and constructed to provide data for stiffened steel plate units under combined axial and lateral loads. The system included an assembly of discrete plate edge restraints that were developed to represent symmetric boundary conditions within a grillage system. Twelve full-scale panels including ‘as-built’, ‘deformed’ and ‘damaged’ specimens were tested in this set-up.

The specimens failed by combined plate and flexural buckling, stiffener tripping or local collapse, depending on the magnitude of lateral loads and local damage. Load-shortening curves associated with different failure modes were found to be distinctly different and it was found that a small lateral load could change the failure mode from flexural buckling to tripping. Current design criteria should directly consider effects of the lateral loads on the failure modes and the collapse loads of stiffened plates.     

无加筋平板极限强度的简化解析法与规范公式的比较

无加筋板是船舶结构的主要构件之一，船舶结构强度校核的一项重要内容就是校核各平板单元是否具备足够的强度储备。最近几年，作者们采用弹性大挠度理论和刚塑性分析相结合的简化解析方法，曾给出了板和加筋板格在联合载荷作用下的极限强度计算公式，并与部分实验值相比，吻合较好，但没有与目前船级社所采用的规范计算公式作过比较。现作这一比较工作，也包括与有限元分析的比较；同时对以前所开发的简化解析法又作了进一步的改进，文章报道这一改进结果。最后，采用上述三种方法，对影响平板极限强度的几个主要参数进行了研究，结果表明，简化解析法与规范计算公式吻合较好。     

双向密加筋板强度公式的推导及其修正

将双向密加筋板简化成正交异性板模型,通过对平衡方程的无因次变换,利用各向同性板的弯曲要素,求得正交异性板在均布载荷下的最大应力值。具体分析5种加筋板结构形式、2种加强筋类型和2种加强筋的尺寸。计算结果表明,文中提供的公式可以准确地对双向密加筋板的强度进行预报。     

复合材料船体纵向极限承载能力分析

该文利用梁柱理论推导出复合材料梁柱的极限承载能力公式，讨论了加筋板的初始几何缺陷，载荷偏心，蒙皮屈曲后的有效蒙皮宽度对复合材料长帽形加筋板的极限承载能力的影响。利用复合材料梁柱理论计算船体甲板或船底板结构视加筋板单元构件的极限承载能力，最后由Smith法来计算复合材料船体的极限承载能力。     

冲击载荷下加筋板非线性瞬态分析

本文用半解析的方法分析了横向冲击载荷下加筋板的非线性瞬态响应。考虑膜力的存在，忽略筋截面上的剪切应力，引入板的应力函数，采用离散加筋板模型，运用能量原理建立加筋板的动响应控制方程。假设挠度为双级数形式，运用迦辽金法，将加筋板的动响应方程转化为一个多自由度的动力系统，采用数值方法来求解。本文最后给出了几个模型的计算结果。     

Assessment of IACS-CSR implicit safety levels for buckling strength of stiffened panels for double hull tankers

The present study aims at applying structural reliability methods to assess the implicit safety levels of the buckling strength requirements for longitudinal stiffened panels implemented in the IACS Common Structural Rules (CSR) for double hull oil tankers. The buckling strength requirements considered are used in the initial stage of the hull girder scantlings’ design to control the buckling capacity of longitudinal stiffened panels subjected to the compressive loads induced by the hull girder vertical bending. The following buckling collapse failure modes are explicitly considered in the design formulation: uniaxial buckling of the plating between stiffeners, column buckling of stiffeners with attached plating and lateral-torsional buckling or tripping of stiffeners.The paper presents the procedure used to assess the implicit safety levels of the strength requirements for the three buckling collapse failure modes above mentioned, which includes the optimization of the scantlings of the plate panels and longitudinal stiffeners in order to reflect the minimum strength required by the formulation. A first order reliability formulation is adopted, and stochastic models proposed in the literature are used to quantify the uncertainty in the relevant design variables. A sample of five oil tankers representative of the range of application of the IACS-CSR design rules is considered. The effect of corrosion in the implicit safety levels is quantified based on the three corrosion levels of the Net Thickness Approach (NTA) adopted in the design rules. Sensitivity analyses are also performed to quantify the relative contribution or importance of each design random variable to the implicit safety levels.     

A computational investigation of the effects of both-sides general corrosion on the buckling/plastic collapse behaviour and strength of stiffened plates

This paper presents the results of an investigation into the post-buckling behaviour and ultimate strength of imperfect corroded stiffened steel plates used in ships and other marine-related structures. A series of elastic–plastic large deflection finite element analyses is performed on stiffened steel plates suffering general corrosion wastage with random distribution. General corrosion is introduced into the finite element models using a random thickness surface model. The effects of corroded stiffened plate parameters on the post-buckling and ultimate strengths are evaluated in detail. The stiffeners of different symmetrical or unsymmetrical cross-sections are introduced into the models for analysis. Some distinctions are explored and highlighted between the behaviours of steel plates suffering general corrosion in unstiffened and stiffened cases. Finally, a proposal is given in order to simulate the average stress–average strain relationship of stiffened steel plates having both-surface general corrosion wastage.     

A study on scantling formulae of plate members due to lateral pressure under the effect of axial loads

Existing rule scantling formulae of plate members are based on conventional plastic design theory, and do not necessarily reflect complicated plate bending phenomena under axial loads. In this study, we first formulated the effect of axial load on the fully plastic moment based on the von Mises yield criterion for longitudinally stiffened plate in addition to the well-known formula for transversely stiffened plate. In addition, we derived a theoretical formulation of the lateral pressure corresponding to 2-point hinge and 3-point hinge formation taking account of the effect of the additional lateral force due to the axial loads on the deflected plating, using a simple plate strip bending model assuming a long plate with a large aspect ratio.Then, a series of elastic-plastic FE analyses was carried out to verify the structural behavior and the effect of axial load on the plate plastic bending strength. The plate strength was evaluated based on the residual deflection criteria of two cases (0.26 mm and 4.0 mm), and the results were compared with the theoretical derivation. As a result, it was found that assumption of linear strength reduction to the axial stress can cover the transversely stiffened plate under compressive axial stress conservatively. As to the transversely stiffened plate under tensile axial stress and the longitudinally stiffened plate, the strength reduction was in accordance with the reduction in the fully plastic moment based on the von Mises yield criterion in the conservative side. Finally, based on the findings, the required plate thickness coefficients were proposed on an empirical basis both for transversely and longitudinally stiffened plate under compressive and tensile axial loads.