Modeling drivers' diversion from normal routes under ATIS using generalized estimating equations and binomial probit link function

Advanced Traveler Information Systems (ATIS) provide travelers with real time traffic information to optimize their travel choices. The objective of this paper is to model drivers' diversion from their normal routes in the provision of ATIS. Five different scenarios of traffic information are used. Generalized Estimating Equations (GEE) framework with repeated observations and binomial probit link function is introduced and implemented. GEE with four different correlation structures including the independent case are developed and compared with each other and with regular Maximum Likelihood Estimation (MLE). A travel simulator was used. Sixty-five subjects have traveled 10 simulated trial days each on a 40-link realistic network with real historical congestion levels. The results showed that providing traffic information increases the probability of drivers' diversion from their normal routes. Adding advice to the pre-trip and/or en-route information encourages drivers to divert. Providing en-route in addition to the pre-trip information with or without advice increases the diversion probability. High travel time on the normal route and less travel time on the diverted route increase the probability of diversion. High-educated drivers are less likely to divert. Expressway users are more likely to divert from their normal routes under ATIS. Drivers' familiarity with the device that provides the information and high number of traffic signals on the normal route increase the diversion probability.     

Modeling the effects of traveler information on freeway origin–destination demand prediction

The primary focus of this research is to develop an approach to capture the effect of travel time information on travelers’ route switching behavior in real-time, based on on-line traffic surveillance data. It also presents a freeway Origin–Destination demand prediction algorithm using an adaptive Kalman Filtering technique, where the effect of travel time information on users’ route diversion behavior has been explicitly modeled using a dynamic, aggregate, route diversion model. The inherent dynamic nature of the traffic flow characteristics is captured using a Kalman Filter modeling framework. Changes in drivers’ perceptions, as well as other randomness in the route diversion behavior, have been modeled using an adaptive, aggregate, dynamic linear model where the model parameters are updated on-line using a Bayesian updating approach. The impact of route diversion on freeway Origin–Destination demands has been integrated in the estimation framework. The proposed methodology is evaluated using data obtained from a microscopic traffic simulator, INTEGRATION. Experimental results on a freeway corridor in northwest Indiana establish that significant improvement in Origin–Destination demand prediction can be achieved by explicitly accounting for route diversion behavior.     

Machine learning for multi-jurisdictional optimal traffic corridor control

Urban traffic corridors are often controlled by more than one agency. Typically in North America, a state of provincial transportation department controls freeways while another agency at the municipal or city level controls the nearby arterials. While the different segments of the corridor fall under different jurisdictions, traffic and users know no boundaries and expect seamless service. Common lack of coordination amongst those authorities due to lack of means for information exchange and/or possible bureaucratic ‘institutional grid-lock’ could hinder the full potential of technically-possible integrated control. Such institutional gridlock and related lack of timely coordination amongst the different agencies involved can have a direct impact on traffic gridlock. One potential solution to this problem is through integrated automatic control under intelligent transportation systems (ITS). Advancements in ITS and communication technology have the potential to considerably reduce delay and congestion through an array of network-wide traffic control and management strategies that can seamlessly cross-jurisdictional boundaries. Perhaps two of the most promising such control tools for freeway corridors are traffic-responsive ramp metering and/or dynamic traffic diversion possibly using variable message signs (VMS). Technically, the use of these control methods separately might limit their potential usefulness. Therefore, integrated corridor control using ramp metering and VMS diversion simultaneously might be synergetic and beneficial. Motivated by the above problem and potential solution approach, the aim of the research presented in this paper is to develop a self-learning adaptive integrated freeway-arterial corridor control for both recurring and non-recurring congestion. The paper introduces the use of reinforcement learning, an Artificial Intelligence method for machine learning, to provide optimal control using ramp metering and VMS routing in an integrated agent for a freeway-arterial corridor. Reinforcement learning is an approach whereby the control agent directly learns optimal strategies via feedback reward signals from its environment. A simple but powerful reinforcement learning method known as Q-learning is used. Results from an elaborate simulation study on a key corridor in Toronto are very encouraging and discussed in the paper.     

Integrating mesoscopic dynamic traffic assignment with agent-based travel behavior models for cumulative land development impact analysis

A number of approaches have been developed to evaluate the impact of land development on transportation infrastructure. While traditional approaches are either limited to static modeling of traffic performance or lack a strong travel behavior foundation, today’s advanced computational technology makes it feasible to model an individual traveler’s response to land development. This study integrates dynamic traffic assignment (DTA) with a positive agent-based microsimulation travel behavior model for cumulative land development impact studies. The integrated model not only enhances the behavioral implementation of DTA, but also captures traffic dynamics. It provides an advanced yet practical approach to understanding the impact of a single or series of land development projects on an individual driver’s behavior, as well as the aggregated impacts on the demand pattern and time-dependent traffic conditions. A simulation-based optimization (SBO) approach is proposed for the calibration of the modeling system. The SBO calibration approach enhances the transferability of this integrated model to other study areas. Using a case study that focuses on the cumulative land development impact along a congested corridor in Maryland, various regional and local travel behavior changes are discussed to show the capability of this tool for behavior side estimations and the corresponding traffic impacts.     

Modeling Travel Time Under ATIS Using Mixed Linear Models

The objective of this paper is to model travel time when drivers are equipped with pre-trip and/or en-route real-time traffic information/advice. A travel simulator with a realistic network and real historical congestion levels was used as a data collection tool. The network included 40 links and 25 nodes. This paper presents models of the origin-to-destination travel time and en-route short-term route (link) travel time under five different types and levels of advanced traveler information systems (ATIS). Mixed linear models with the repeated observation's technique were used in both models. Different covariance structures (including the independent case) were developed and compared. The effect of correlation was found significant in both models. The trip travel time analysis showed that as the level of information increases (adding en-route to the pre-trip and advice to the advice-free information), the average travel time decreases. The model estimates show that providing pre-trip and en-route traffic information with advice could result in significant savings in the overall travel time. The en-route short-term (link) travel time analysis showed that the en-route short-term (link) information has a good chance of being used and followed. The short-term qualitative information is more likely to be used than quantitative information. Learning and being familiar with the system that provides the information decreases en-route short-term delay.     

Effect of variable message signs on driver speed behavior on a section of expressway under adverse fog conditions—A driving simulator approach

Variable message signs (VMS) are used to provide dynamic information and one current application is to show different speed limits under different conditions. As speed is an important contributor to road accidents and also affects driver speed behavior, the present study focuses on how effective traffic advisory information is when helping drivers to divert from potentially dangerous conditions. Graphical representation of an Expressway section made it easy to isolate the effects of speed etc. by drivers with information provided through VMS under adverse fog conditions. Understanding and reacting to the VMS system by drivers is essential for its success. If drivers do not react by changing speed behavior then the VMS system will fail and further implementation may cease. In this paper an Analysis of Variance model, which is appropriate to the proposed experimental conditions, is used to study how subjects (drivers) will perceive provided information and also to find the effect of VMS on driver speed behavior on the simulated Expressway section.     

Effectiveness of using variable message signs to disseminate dynamic traffic information: Evidence from field trails in European cities

Variable message signs (VMS) can provide up‐to‐date traffic information and guidance to drivers through electronic signs at the roadside. The paper draws together the results from VMS field trials conducted in nine cities as part of European Union‐sponsored research projects carried out between 1994 and 1999. The projects followed common guidelines in carrying out field trial evaluations, which has enabled generalized findings to be made on the impacts of the different VMS applications. The main emphasis in the paper is on drivers' reactions to VMS and the impacts of VMS on road network efficiency. Results are reported for four different types of traffic information. For incident messages, it is not only the severity of the problem reported that influences the level of diversions, but also other factors such as the specific location mentioned and the availability of viable alternative routes to avoid the problem location. For route guidance information, it is demonstrated that substantial diversions occur when the route advice differs from that given normally. For continuous information describing the traffic state on a major route, information increases the use of the major route and reduces use of alternative routes if there are no traffic problems reported on the major route. Travel time information was well regarded by drivers and found to be effective in inducing route changes. In general, the deployments of VMS to inform drivers of traffic conditions have proved successful in terms of improving network travel times and reducing environmental impacts. Whilst such changes have been relatively small, driver perception of the benefits is much higher. This is potentially very significant in terms of the role that VMS can play in the development of integrated transport strategies, as the provision of information may encourage greater acceptance of a range of demand management measures.     

Effects of different factors on drivers’ guidance compliance behaviors under road condition information shown on VMS

It is generally accepted that compliance behavior is affected by many factors. The purpose of this study is to investigate the effects of diverse factors on drivers’ guidance compliance behaviors under road condition information shown on graphic variable message sign (VMS), and based on this to find out a better information release mode. The involved data were obtained from questionnaire survey, and ordinal regression was used to analyze the casual relation between guidance compliance behavior and its influencing factors. Based on an overall analysis of conditions in driver’s route choice, an accurate method was proposed to calculate the compliance rate. The model testing information indicated that ordinal regression model with complementary log–log being the link function was appropriate to quantify the relation between the compliance rate and the factors. The estimation results showed that age, driving years, average annual mileage, monthly income, driving style, occupation, the degree of trust in VMS, the familiarity with road network and the route choice style were significant determinants of guidance compliance behavior. This paper also compared two different guidance modes which were ordinary guidance mode (M1) and predicted guidance mode (M2) through simulation. The average speed fluctuations and average travel time supported that M2 had better effect in improving traffic flow and balancing traffic load and resource. Some detailed suggestions of releasing guidance information were proposed with the explanation by flow-density curve and variation of traffic flows. These findings are the foundation to design and improve guidance systems by assessing guidance effect and modifying guidance algorithm.     

Behavior-based consistency-seeking models as deployment alternatives to dynamic traffic assignment models

This paper proposes a behavior-based consistency-seeking (BBCS) model as an alternative to the dynamic traffic assignment paradigm for the real-time control of traffic systems under information provision. The BBCS framework uses a hybrid probabilistic–possibilistic model to capture the day-to-day evolution and the within-day dynamics of individual driver behavior. It considers heterogeneous driver classes based on the broad behavioral characteristics of drivers elicited from surveys and past studies on driver behavior. Fuzzy logic and if–then rules are used to model the various driver behavior classes. The approach enables the modeling of information characteristics and driver response to be more consistent with the real-world. The day-to-day evolution of driver behavior characteristics is reflected by updating the appropriate model parameters based on the current day’s experience. The within-day behavioral dynamics are reactive and capture drivers’ actions vis-à-vis the ambient driving conditions by updating the weights associated with the relevant if–then rules. The BBCS model is deployed by updating the ambient driver behavior class fractions so as to ensure consistency with the real-time traffic sensor measurements. Simulation experiments are conducted to investigate the real-time applicability of the proposed framework to a real-world network. The results suggest that the approach can reasonably capture the within-day variations in driver behavior model parameters and class fractions in the traffic stream. Also, they indicate that deployment-capable information strategies can be used to influence system performance. From a computational standpoint, the approach is real-time deployable.     

Driver response to variable message signs: a stated preference investigation

This paper uses a Stated Preference approach to undertake a detailed assessment of the effect on drivers’ route choice of information provided by variable message signs (VMS). Although drivers’ response to VMS information will vary according to the availability of alternative routes and the extent to which they are close substitutes, our findings show that route choice can be strongly influenced by the provision of information about traffic conditions ahead. This has important implications for the use of VMS systems as part of comprehensive traffic management and control systems. The principal findings are that the impact of VMS information depends on: the content of the message, such as the cause of delay and its extent; local circumstances, such as relative journey times in normal conditions; and drivers’ characteristics, such as their age, sex and previous network knowledge. The impact of qualitative indicators, visible queues and delays were examined. It was found that not only is delay time more highly valued than normal travel time, which is to be expected, but that drivers become more sensitive to delay time as delay times increased across the range presented.     

Optimal locations and travel time display for variable message signs

This paper first develops a network equilibrium model with the travel time information displayed via variable message signs (VMS). Specifically, the equilibrium considers the impact of the displayed travel time information on travelers’ route choices under the recurrent congestion, with the endogenous utilization rates of displayed information by travelers. The existence of the equilibrium is proved and an iterative solution procedure is provided. Then, we conduct the sensitivity analyses of the network equilibrium and further propose a paradox, i.e., providing travel time information via VMS to travelers may degrade the network performance under some poor designs. Therefore, we investigate the problem of designing the VMS locations and travel time display within a given budget, and formulate it as a mixed integer nonlinear program, solved by an active-set algorithm. Lastly, numerical examples are presented to offer insights on the equilibrium results and optimal designs of VMS.     

Driver response to variable message sign information in London

Variable message signs (VMS) have been installed in London to notify motorists of planned events and current network problems. To guide investment and operational decisions an understanding is required of the impacts of VMS information. This paper presents the results of a study of driver response to VMS information. The study employed questionnaires to investigate the effect of different messages on route choice. A statistical analysis of stated intention questionnaire data enabled logistic regression models to be developed relating the probability of route diversion to driver, journey and message characteristics. The resultant models indicate that the location of the incident and the message content are important factors influencing the probability of diversion. A survey of drivers' actual responses to a message activation showed that only one third of drivers saw the information presented to them and few of these drivers diverted, although many found the information useful. Only one-fifth of the number of drivers diverted compared to that expected from the results of the stated intention questionnaire. It is thought that the low response rate achieved for the stated intention survey will have exaggerated drivers' responsiveness to VMS messages. Interestingly, survey data for another UK city with a newly installed VMS system showed that the number of drivers diverting due to VMS information was very similar to that expected from the results of the stated intention questionnaire. It is suggested that the use of London's VMS signs to display warnings of disruptions expected on future dates may be reducing their effectiveness as a channel for more urgent warnings.     

Quantifying traveler information provision in dynamic heterogeneous traffic networks

Information is effectively the same as a change in uncertainty perceived by an observer. This paper adopts the strict definition of information from Shannon’s Information Theory and provides procedures for quantifying effective provision of traveler information, considering it to be equivalent to the change of perceived uncertainty. The proposed method combines a cognitive grouping theory and an information learning scheme at an individual’s level to evaluate the dynamic information provision in the unit of a bit. Such numerical quantification can be meaningful in evaluating alternatives with more fine-grained information provision strategies and understanding their equity impact. Quantifying information in a manner consistent with Information Theory also provides a ‘shared language’ that facilitates more constructive discussion among stakeholders from different backgrounds. The case study is conducted on a heterogeneous dynamic traffic network near Downtown Los Angeles for evaluating different alternatives of a proposed dynamic message board in terms of its location and dynamic content.     

Personalized real-time traffic information provision: Agent-based optimization model and solution framework

The advancement of information and communication technology allows the use of more sophisticated information provision strategies for real-time congested traffic management in a congested network. This paper proposes an agent-based optimization modeling framework to provide personalized traffic information for heterogeneous travelers. Based on a space–time network, a time-dependent link flow based integer programming model is first formulated to optimize various information strategies, including elements of where and when to provide the information, to whom the information is given, and what alternative route information should be suggested. The analytical model can be solved efficiently using off-the-shelf commercial solvers for small-scale network. A Lagrangian Relaxation-based heuristic solution approach is developed for medium to large networks via the use of a mesoscopic dynamic traffic simulator.     

Equilibrium analysis and route guidance in large-scale networks with MFD dynamics

Recent studies have demonstrated that Macroscopic Fundamental Diagram (MFD), which provides an aggregated model of urban traffic dynamics linking network production and density, offers a new generation of real-time traffic management strategies to improve the network performance. However, the effect of route choice behavior on MFD modeling in case of heterogeneous urban networks is still unexplored. The paper advances in this direction by firstly extending two MFD-based traffic models with different granularity of vehicle accumulation state and route choice behavior aggregation. This configuration enables us to address limited traffic state observability and to scrutinize implications of drivers’ route choice in MFD modeling. We consider a city that is partitioned in a small number of large-size regions (aggregated model) where each region consists of medium-size sub-regions (more detailed model) exhibiting a well-defined MFD. This paper proposes a route guidance advisory control system based on the aggregated model as a large-scale traffic management strategy that utilizes aggregated traffic states while sub-regional information is partially known. In addition, we investigate the effect of equilibrium conditions (i.e. user equilibrium and system optimum) on the overall network performance, in particular MFD functions.     

An impact analysis of traffic image information system on driver travel choice

A driver is one of the main components in a transportation system that influences the effectiveness of any active demand management (ADM) strategies. As such, the understanding on driver behavior and their travel choice is crucial to ensure the successful implementation of ADM strategies in alleviating traffic congestion, especially in city centres. This study aims to investigate the impact of traffic information dissemination via traffic images on driver travel choice and decision. A relationship of driver travel choice with respect to their perceived congestion level is developed by an integrated framework of genetic algorithm–fuzzy logic, being a new attempt in driver behavior modeling. Results show that drivers consider changing their travel choice when the perceived congestion level is medium, in which changing departure time and diverting to alternative roads are two popular choices. If traffic congestion escalates further, drivers are likely to cancel their trip. Shifting to public transport system is the least likely choice for drivers in an auto-dependent city. These findings are important and useful to engineers as they are required to fully understand driver (user) sensitivity to traffic conditions so that relevant active travel demand management strategies could be implemented successfully. In addition, engineers could use the relationships established in this study to predict drivers’ response under various traffic conditions when carrying out modeling and impact studies.     

Bayesian network-based formulation and analysis for toll road utilization supported by traffic information provision

Congestion pricing has been proposed and investigated as an effective means of optimizing traffic assignment, alleviating congestion, and enhancing traffic operation efficiencies. Meanwhile, advanced traffic information dissemination systems, such as Advanced Traveler Information System (ATIS), have been developed and deployed to provide real-time, accurate, and complete network-wide traffic information to facilitate travelers’ trip plans and routing selections. Recent advances in ATIS technologies, especially telecommunication technology, allow dynamic, personalized, and multimodal traffic information to be disseminated and impact travelers’ choices of departure times, alternative routes, and travel modes in the context of congestion pricing. However, few studies were conducted to determine the impact of traffic information dissemination on toll road utilizations. In this study, the effects of the provisions of traffic information on toll road usage are investigated and analyzed based on a stated preference survey conducted in Texas. A Bayesian Network (BN)-based approach is developed to discover travelers’ opinions and preferences for toll road utilization supported by network-wide traffic information provisions. The probabilistic interdependencies among various attributes, including routing choice, departure time, traffic information dissemination mode, content, coverage, commuter demographic information, and travel patterns, are identified and their impacts on toll road usage are quantified. The results indicate that the BN model performs reasonably well in travelers’ preference classifications for toll road utilization and knowledge extraction. The BN Most Probable Explanation (MPE) measurement, probability inference and variable influence analysis results illustrate travelers using highway advisory radio and internet as their primary mode of receiving traffic information are more likely to comply with routing recommendations and use toll roads. Traffic information regarding congested roads, road hazard warnings, and accident locations is of great interest to travelers, who tend to acquire such information and use toll roads more frequently. Travel time formation for home-based trips can considerably enhance travelers’ preferences for toll road usage. Female travelers tend to seek traffic information and utilize toll roads more frequently. As expected, the information provided at both pre-trip and en-route stages can positively influence travelers’ preferences for toll road usage. The proposed methodology and research findings advance our previous study and provide insight into travelers’ behavioral tendencies concerning toll road utilization in support of traffic information dissemination.     

ITS applications for work zones

The use of Intelligent Transportation Systems (ITS) in construction work zones to disseminate traffic information has increased significantly in recent years, mainly with the use of Variable Message Signs (VMS). VMS are used based on the assumption that informed drivers will make better travel decisions, thereby reducing congestion. However, the extent of change in driver behavior is difficult to predict prior to ITS deployment. This difficulty leads to the larger problem of justifying investment in ITS. This article proposes an ITS deployment decision support tool using micro‐simulation. The approach determines the required diversion effectiveness of a work zone ITS deployment using VMS. The methodology was tested using the Glenmore Trail/Elbow Drive/5^th Street interchange project (GE5) in Calgary, Canada. The results indicate that the proposed approach will assist agencies in justifying ITS investment by exhibiting the potential resultant societal benefits.     

Modeling and optimization of multimodal urban networks with limited parking and dynamic pricing

Cruising-for-parking constraints mobility in urban networks. Car-users may have to cruise for on-street parking before reaching their destinations. The accessibility and the cost of parking significantly influence people's travel behavior (such as mode choice, or parking facility choice between on-street and garage). The cruising flow causes delays eventually to everyone, even users with destinations outside limited parking areas. It is therefore important to understand the impact of parking limitation on mobility, and to identify efficient parking policies for travel cost reduction. Most existing studies on parking fall short in reproducing the dynamic spatiotemporal features of traffic congestion in general, lack the treatment of dynamics of the cruising-for-parking phenomenon, or require detailed input data that are typically costly and difficult to collect. In this paper, we propose an aggregated and dynamic approach for modeling multimodal traffic with the treatment on parking, and utilize the approach to design dynamic parking pricing strategies. The proposed approach is based on the Macroscopic Fundamental Diagram (MFD), which can capture congestion dynamics at network-level for single-mode and bi-modal (car and bus) systems. A parsimonious parking model is integrated into the MFD-based multimodal modeling framework, where the dynamics of vehicular and passenger flows are considered with a change in the aggregated behavior (e.g. mode choice and parking facility choice) caused by cruising and congestion. Pricing strategies are developed with the objective of reducing congestion, as well as lowering the total travel cost of all users. A case study is carried out for a bi-modal city network with a congested downtown region. An elegant feedback dynamic parking pricing strategy can effectively reduce travel delay of cruising and the generic congestion. Remarkably, such strategy, which is applicable in real-time management with limited available data, is fairly as efficient as a dynamic pricing scheme obtained from system optimum conditions and a global optimization with full information about the future states of the system. Stackelberg equilibrium is also investigated in a competitive behavior between different parking facility operators. Policy indications on on-street storage capacity management and pricing are provided.     

Path flow estimator for planning applications in small communities

This paper presents an alternative planning framework to model and forecast network traffic for planning applications in small communities, where limited resources debilitate the development and applications of the conventional four-step travel demand forecasting model. The core idea is to use the Path Flow Estimator (PFE) to estimate current and forecast future traffic demand while taking into account of various field and planning data as modeling constraints. Specifically, two versions of PFE are developed: a base year PFE for estimating the current network traffic conditions using field data and planning data, if available, and a future year PFE for predicting future network traffic conditions using forecast planning data and the estimated base year origin–destination trip table as constraints. In the absence of travel survey data, the proposed method uses similar data (traffic counts and land use data) as a four-step model for model development and calibration. Since the Institute of Transportation Engineers (ITE) trip generation rates and Highway Capacity Manual (HCM) are both utilized in the modeling process, the analysis scope and results are consistent with those of common traffic impact studies and other short-range, localized transportation improvement programs. Solution algorithms are also developed to solve the two PFE models and integrated into a GIS-based software called Visual PFE. For proof of concept, two case studies in northern California are performed to demonstrate how the tool can be used in practice. The first case study is a small community of St. Helena, where the city’s planning department has neither an existing travel demand model nor the budget for developing a full four-step model. The second case study is in the city of Eureka, where there is a four-step model developed for the Humboldt County that can be used for comparison. The results show that the proposed approach is applicable for small communities with limited resources.