A macroscopic traffic model for highway work zones: Formulations and numerical results

This study presents a multilane model for analyzing the dynamic traffic properties of a highway segment under a lane‐closure operation that often incurs complex interactions between mandatory lane‐changing vehicles and traffic at unblocked lanes. The proposed traffic flow formulations employ the hyperbolic model used in the non‐Newtonian fluid dynamics, and assume the lane‐changing intensity between neighboring lanes as a function of their difference in density. The results of extensive simulation experiments indicate that the proposed model is capable of realistically replicating the impacts of lane‐changing maneuvers from the blocked lanes on the overall traffic conditions, including the interrelations between the approaching flow density, the resulting congestion level, and the exiting flow rate from the lane‐closure zone. Our extensive experimental analyses also confirm that traffic conditions will deteriorate dramatically and evolve to the state of traffic jam if the density has exceeded its critical level that varies with the type of lane‐closure operations. This study also provides a convenient way for computing such a critical density under various lane‐closure conditions, and offers a theoretical basis for understanding the formation as well as dissipation of traffic jam.     

Traffic performance of shared lanes at signalized intersections based on cellular automata modeling

Shared lanes at signalized intersections are designed for use by vehicles of different movement directions. Shared lane usage increases the flexibility of assigning lane grouping to accommodate variable traffic volume by direction. However, a shared lane is not always beneficial as it can at time result in blockage that leads to both capacity and safety constraints. This paper establishes a cellular automata model to simulate traffic movements at signalized intersections with shared lanes. Several simulation experiments are carried out both for a single shared lane and for an approach with a shared lane. Simulation of a single shared lane used by straight‐through and right‐turn (as similar to left‐turn in the USA) vehicles suggests that the largest travel delay occurs when traffic volumes (vehicles/lane) of the two movement streams along the shared lane are at about the same level. For a trial lane‐group with a shared lane, when traffic volumes of the two movement streams are quite different, the shared lane usage is not efficient in terms of reduction in traffic delay. The simulation results are able to produce the threshold traffic volume to arrange a shared lane along an approach. Copyright © 2013 John Wiley & Sons, Ltd.     

A continuum model for the dispersion of traffic on two-lane roads

A continuum model for two-lane traffic flow is developed using the theory of kinematic waves in which the wavespeeds in the two lanes are assumed constant but unequal. The transient behaviour is found exactly using Riemann's method of characteristics and an asymptotic model of the long time flow is described. It is shown, that for large times, the traffic concentration moves with a weighted mean wavespeed of the two lanes and disperses about this mean speed as a result of interlane concentration differences generated by the relative wavespeeds. The dispersion can be described by a virtual coefficient of diffusion proportional to the square of the differences of the two wavespeeds and inversely proportional to the rate of lane changing. The technique is extended to describe three-lane traffic flow and to include the dependence of wavespeed upon concentration.     

Effects of low speed limits on freeway traffic flow

Recent years have seen a renewed interest in Variable Speed Limit (VSL) strategies. New opportunities for VSL as a freeway metering mechanism or a homogenization scheme to reduce speed differences and lane changing maneuvers are being explored. This paper examines both the macroscopic and microscopic effects of different speed limits on a traffic stream, especially when adopting low speed limits. To that end, data from a VSL experiment carried out on a freeway in Spain are used. Data include vehicle counts, speeds and occupancy per lane, as well as lane changing rates for three days, each with a different fixed speed limit (80 km/h, 60 km/h, and 40 km/h). Results reveal some of the mechanisms through which VSL affects traffic performance, specifically the flow and speed distribution across lanes, as well as the ensuing lane changing maneuvers. It is confirmed that the lower the speed limit, the higher the occupancy to achieve a given flow. This result has been observed even for relatively high flows and low speed limits. For instance, a stable flow of 1942 veh/h/lane has been measured with the 40 km/h speed limit in force. The corresponding occupancy was 33%, doubling the typical occupancy for this flow in the absence of speed limits. This means that VSL strategies aiming to restrict the mainline flow on a freeway by using low speed limits will need to be applied carefully, avoiding conditions as the ones presented here, where speed limits have a reduced ability to limit flows. On the other hand, VSL strategies trying to get the most from the increased vehicle storage capacity of freeways under low speed limits might be rather promising. Additionally, results show that lower speed limits increase the speed differences across lanes for moderate demands. This, in turn, also increases the lane changing rate. This means that VSL strategies aiming to homogenize traffic and reduce lane changing activity might not be successful when adopting such low speed limits. In contrast, lower speed limits widen the range of flows under uniform lane flow distributions, so that, even for moderate to low demands, the under-utilization of any lane is avoided. These findings are useful for the development of better traffic models that are able to emulate these effects. Moreover, they are crucial for the implementation and assessment of VSL strategies and other traffic control algorithms.     

Establishing speed–flow–density relationships for exclusive motorcycle lanes

Abstract

The motorcycle is a popular mode of transport in Malaysia and developing Asian countries, but its significant representation in the traffic mix results in high rates of motorcycle accidents. As a result, the Malaysian Government decided to segregate motorcycle traffic along its new federal roads as an engineering approach to reduce accidents. However, traffic engineers needed to know the maximum traffic a motorcycle lane could accommodate. Despite substantial literature related to speed–flow–density relationships and capacities of various transport facilities, there is a knowledge gap regarding motorcycle lanes. This paper establishes motorcycle speed–flow–density relationships and capacities of exclusive motorcycle lanes in Malaysia. Observations of motorcycle flows and speeds were conducted along existing and experimental motorcycle lanes. Motorcycle speed–density data were aggregated and plotted for two types of observable motorcycle riding behaviour patterns that were influenced by the widths of a motorcycle lane: the headway pattern (lane width ≤ 1.7 m) and the space pattern (lane width > 1.7 m). For both riding patterns, regression analysis of motorcycle speed–density data best fits the logarithmic model and consequently the motorcycle flow–density and speed–flow models are derived. Motorcycle lane capacities for headway and space riding patterns are estimated as 3300 mc/hr/lane and 2200 mc/hr/m, respectively.     

基于元胞自动机的双车道变道交通流特性研究

在庞杂的城市交通环境下,驾驶员为了寻求更快的速度,常常采用主动的换道行为。由于汽车使用量逐年增长,换道引起的交通事故经常发生。研究车辆变道行为,寻求有效措施减少交通事故的发生,对提高道路安全性具有积极的意义。本文以多车道系统中车辆变道行为为研究对象,以元胞自动机理论为基础,对比分析单向单车道、单向双车道换道行为,并运用MATLAB仿真软件进行分析,获得变道交通流的相关特性曲线。     

Methods of dropping auxiliary lanes at freeway weaving segments

Auxiliary lanes connecting freeway entrance and exit ramps provide additional space for entering and exiting vehicles to change lanes. The method of dropping auxiliary lanes is critical in the design of freeway auxiliary lanes. This study investigates the performance of different methods of dropping auxiliary lanes. Case studies were conducted at two selected freeway segments with successive entrance or exit ramps in the City of Houston. Traffic simulation analysis results of these two case studies show that additional operational benefits can be achieved by extending an auxiliary lane beyond the freeway weaving segment. The study also found that if the weaving segment is followed by an entrance/exit ramp and this ramp has high traffic volume, it can be less operationally favorable to extend and terminate the auxiliary lane at this entrance/exit ramp location. Instead, dropping the auxiliary lane before this entrance/exit ramp represents a more operationally effective option.     

Explaining high-occupancy-toll lane use

In recent years, high-occupancy-toll lanes have emerged as an increasingly popular alternative to high-occupancy-vehicle lanes for solving the problems of traffic congestion and air pollution. However, the existing literature on the use of high-occupancy-toll lanes has attended much to their impacts to the neglect of their determinants. An understanding of why people choose to use high-occupancy-toll lanes will shed light on policy decisions concerning high-occupancy-toll lane investments and developments. To fill this void, this study examines the determinants of high-occupancy-toll lane use with the first comprehensive survey data on the State Route 91 Express Lanes in California and multivariate logistic regression models. The results show that controlling for other variables, household income, vehicle occupancy, commute trip, and age are important predictors of high-occupancy-toll lane use, but gender, trip length, trip frequency, and other household characteristics make no significant differences in high-occupancy-toll lane use. Moreover, contrary to the conventional wisdom, work-to-home trips are found to be more likely to use high-occupancy-toll lanes than home-to-work and other trips. These findings provide some useful indications for the implementation of high-occupancy-toll lanes and future research.     

A study on adjustment factors for U-turns in left-turn lanes at signalized intersections

U-turns are treated as left-turns in the current procedures for estimating saturation flow rates at signalized intersections. While U-turning vehicles are usually mixed with left-turning vehicles in inside or left-turn lanes and conflict with opposing through traffic as left-turning vehicles, the vehicle operating characteristics are different. The objective of this paper is to investigate the effects of U-turns on the traffic flow in left-turn lanes. Field data of 600 headways of left-turning passenger cars and 160 headways of U-turning passenger cars are recorded. The average headways of U-turning passenger cars are found to be significantly larger than those of left-turning passenger cars. The effects of U-turning vehicles depend upon the percent of U-turning vehicles in the left-turn lane, as well as the order of formation in the traffic stream. Adjustment factors for varying percents of U-turning vehicles in left-turn lanes are established.     

Macroscopic modeling of lane‐changing for two‐lane traffic flow

We propose a macroscopic model of lane‐changing that is consistent with car‐following behavior on a two‐lane highway. Using linear stability theory, we find that lane‐changing affects the stable region and the propagation speeds of the first‐order and second‐order waves. In analyzing a small disturbance, our model effectively reproduces certain non‐equilibrium traffic‐flow phenomena—small disturbance instability, stop‐and‐go waves, and local clusters that are affected by lane‐changing. The model also gives the flow‐density relationships in terms of the actual flow rate, the lane‐changing rate, and the difference between the potential flow rate (the flow rate that would have occurred without lane‐changing) and the actual flow rate. The relationships between the actual flow rate and traffic density and between the lane‐changing rate and traffic density follow a reverse‐lambda shape, which is largely consistent with observed traffic phenomena.     

Lane-harmonised passenger car equivalents for heterogeneous expressway traffic

In order to account for variations in traffic composition during traffic analysis, passenger car equivalent (PCE) factors are used to convert flow rates of various vehicle classes into flow rates in terms of passenger car units (PCUs). Earlier studies have developed various methods to estimate PCE values but only a few of them are based on uninterrupted traffic flow, particularly for flow regimes with heterogeneous traffic where differential (lower) speed limits are imposed on commercial vehicles. This paper proposes a lane-harmonisation approach, which leverages on the high variation in traffic composition across the lanes, to estimate PCE factors for urban expressways. Multiple linear regression is used and the PCE factors obtained for motorcycles, light goods vehicles, and heavy goods vehicles are 0.65, 1.53, and 2.75, respectively. The estimated capacity flow rate after the application of the obtained PCE factors is around 2200 PCUs per hour per lane.     

Modeling and analysis of mixed flow of cars and powered two wheelers

In modern cities, a rapid increase of motorcycles and other types of Powered Two-Wheelers (PTWs) is observed as an answer to long commuting in traffic jams and complex urban navigation. Such increasing penetration rate of PTWs creates mixed traffic flow conditions with unique characteristics that are not well understood at present. Our objective is to develop an analytical traffic flow model that reflects the mutual impacts of PTWs and Cars. Unlike cars, PTWs filter between cars, have unique dynamics, and do not respect lane discipline, therefore requiring a different modeling approach than traditional “Passenger Car Equivalent” or “Follow the Leader”. Instead, this work follows an approach that models the flow of PTWs similarly to a fluid in a porous medium, where PTWs “percolate” between cars depending on the gap between them.Our contributions are as follows: (I) a characterization of the distribution of the spacing between vehicles by the densities of PTWs and cars; (II) a definition of the equilibrium speed of each class as a function of the densities of PTWs and cars; (III) a mathematical analysis of the model’s properties (IV) an impact analysis of the gradual penetration of PTWs on cars and on heterogeneous traffic flow characteristics.The proposed model could contribute as an enabler for ‘PTW-aware’ future Cooperative Intelligent Transport Systems technologies and traffic regulations.     

Effect of road width and traffic volume on vehicular interactions in heterogeneous traffic

Highway traffic flow phenomena involve several complex and stochastic variables with high interdependencies. The variations in roadway, traffic and environmental factors influence the traffic flow quality significantly. Capacity analysis of road sections under different traffic and geometric conditions need to quantify the vehicles of widely varying characteristics to a common and universally acceptable unit. Passenger car unit (PCU) is the universally adopted unit of traffic volume, keeping the passenger car as the ‘standard vehicle’ with reference to its static and dynamic characteristics; other vehicles are expressed to its equivalent number in terms of PCUs. The studies carried out in this aspect represent the dynamic nature of impedance caused by a vehicle while moving through a traffic stream. The PCU values recommended by the Highway Capacity Manual are widely applied in many countries; however, their applicability is highly under debate because of the variations in prevailing local traffic conditions. There are several factors that influence the PCU values such as traffic, roadway, vehicle, environmental and control conditions, etc. Apart from vehicular characteristics, the other two major factors that influence the PCU of vehicles are the following: (i) road width and (ii) traffic volume. In this study, estimation of PCU values for the different types of vehicles of a highly heterogeneous traffic on 7.5‐ and 11.0‐m‐wide roads, using micro‐simulation technique, has been dealt with. It has been found that the PCU value of a vehicle type varies significantly with variation in road width and traffic volume. The results of the study indicate that the PCU values are significantly influenced by the said two factors. Copyright © 2012 John Wiley & Sons, Ltd.     

Data mining using regularized adaptive B‐splines regression with penalization for multi‐regime traffic stream models

This paper presents a new data mining method that integrates adaptive B‐spline regression and traffic flow theory to develop multi‐regime traffic stream models (TSMs). Parameter estimation is implemented adaptively and optimally through a constrained bi‐level programming method. The slave programming determines positions of knots and coefficients of the B‐spline by minimizing the error of B‐spline regression. The master programming model determines the number of knots through a regularized function, which balances model accuracy and model complexity. This bi‐level programming method produces the best fitting to speed–density observations under specific order of splines and possesses great flexibility to accommodate the exhibited nonlinearity in speed–density relationships. Jam density can be estimated naturally using spline TSM, which is sometimes hardly obtainable in many other TSM. Derivative continuity up to one order lower than the highest spline degree can be preserved, a desirable property in some application. A five‐regime B‐spline model is found to exist for generalized speed–density relationships to accommodate five traffic operating conditions: free flow, transition, synchronized flow, stop and go traffic, and jam condition. A typical two‐regime B‐spline form is also explicitly given, depending only on free‐flow speed, optimal speed, optimal density, and jam density. Copyright © 2013 John Wiley & Sons, Ltd.     

Dual influences on vehicle speed in special-use lanes and critique of US regulation

We verify that slow speeds in a special-use lane, such as a carpool or bus lane, can be due to both, high demand for that lane and slow speeds in the adjacent regular-use lane. These dual influences are confirmed from months of data collected from all freeway carpool facilities in the San Francisco Bay Area. Additional data indicate that both influences hold: for other types of special-use lanes, including bus lanes; and for other parts of the world.The findings do not bode well for a new US regulation stipulating that most classes of Low-Emitting Vehicles, or LEVs, are to vacate slow-moving carpool lanes. These LEVs invariably constitute small percentages of traffic; e.g. they are only about 1% of the freeway traffic demand in the San Francisco Bay Area. Yet, we show: that relegating some or all of these vehicles to regular-use lanes can significantly add to regular-lane congestion; and that this, in turn, can also be damaging to vehicles that continue to use the carpool lanes. Counterproductive outcomes of this kind are predicted first by applying kinematic wave analysis to a real Bay Area freeway. Its measured data indicate that the site selected for this analysis stands to suffer less from the regulation than will others in the region. Yet, we predict: that the regulation will cause the site’s people-hours and vehicle-hours traveled during the rush to each increase by more than 10%; and that carpool-lane traffic will share in the damages. Real data from the site support these predictions. Further parametric analysis of a hypothetical, but more generic freeway system indicates that these kinds of negative outcomes will be widespread. Constructive ways to amend the new regulation are discussed, as are promising strategies to increase the vehicle speeds in carpool lanes by improving the travel conditions in regular lanes.     

Empirical analysis of heterogeneous traffic flow and calibration of porous flow model

Heterogeneous traffic flow, characterized by a free inter-lane exchange, has become an important issue in addressing congestion in urban areas. It is of particular interest in many developing countries, that experience a strong increase in motorcycle use. New approaches to the heterogeneous non-lane-based flow have been proposed. However insufficient empirical verification has been made to estimate vehicle interaction, that is necessary for an accurate representation of mixed-flow conditions. In this paper, we focus on the porous flow approach to capture the complex interactions. The parameters from this approach are estimated from empirical observations. Video data was recorded and processed to capture vehicle interactions at a number of road sections in Surabaya City, Indonesia. The specific behavior of each vehicle in the traffic flow was captured by developing the pore size–density distributions, analyzing the class-specific critical pore sizes, and producing the class specific speed–density and flow–density diagrams. The results reveal how critical pore sizes are based on pore size–density distributions, the flow diagram for each vehicle class, and how traffic flow relationships for motorcyclists and the other vehicles exhibit significant differences. It is concluded that the proposed approach can represent the specific behavior of the motorcyclist in heterogeneous traffic flow, in both the situations of with- and without an exclusive lane for motorcycles, can clarify motorcyclist’s behavior in terms of passenger car unit of motorcycle, and can therefore support policy making on the improvement of urban transport.     

Hybrid artificial neural network and locally weighted regression models for lane-based short-term urban traffic flow forecasting

ABSTRACT

In recent years, there has been considerable research interest in short-term traffic flow forecasting. However, forecasting models offering a high accuracy at a fine temporal resolution (e.g. 1 or 5?min) and lane level are still rare. In this study, a combination of genetic algorithm, neural network and locally weighted regression is used to achieve optimal prediction under various input and traffic settings. The genetically optimized artificial neural network (GA-ANN) and locally weighted regression (GA-LWR) models are developed and tested, with the former forecasting traffic flow every 5-min within a 30-min period and the latter for forecasting traffic flow of a particular 5-min period of each for four lanes of an urban arterial road in Beijing, China. In particular, for morning peak and off-peak traffic flow prediction, the GA-ANN 5-min traffic flow model results in average errors of 3–5% and most 95th percentile errors of 7–14% for each of the four lanes; for the peak and off-peak time traffic flow predictions, the GA-LWR 5-min traffic flow model results in average errors of 2–4% and most 95th percentile errors are lower than 10% for each of the four lanes. When compared to previous models that usually offer average errors greater than 6–15%, such empirical findings should be of interest to and instrumental for transportation authorities to incorporate in their city- or state-wide Advanced Traveller Information Systems (ATIS).     

Characteristics of truck traffic in Singapore

This paper presents the results of a project conducted to study the characteristics of truck traffic in Singapore. Detailed traffic surveys recording counts of vehicles by axle-configuration were performed at 219 sites over a period of nearly two years. The surveys covered 5 different road classes, namely expressways, arterials, collectors, industrial roads and local roads. It was found that the time distribution of truck travel were not the same among the five road classes. The peaking characteristics of truck traffic were less pronounced compared to passenger car traffic. The peak hour truck volume varied from 67.0% to 9.7% of the daily truck traffic as compared to 13.8% for passenger car traffic. The lane distribution pattern of truck traffic was studied in detail by road class, and was found to be a function of total directional traffic volume, total directional truck volume and the number of traffic lanes. Composition analysis was also carried out to study the lane use characteristics of single- and multiple-unit trucks.     

Exploring suitable traffic conditions for intermittent bus lanes

As one of the most promising bus priority techniques, the innovative intermittent bus lane (IBL) strategy has drawn more attention in the past few years. In this paper, some improvements on the operation of the IBL strategy are proposed, and two cellular automaton models for a roadway section with two lanes, one with no bus priority and the other with an intermittent bus lane, are built to study the characteristics of urban traffic flow. Computer simulations and analytical models are developed to conduct quantitative research on the influence of IBL on the traffic density distribution, traffic velocity, and traffic capacity of the roadway section. By comparing the average paces in the two cases, this paper proposes a methodology to determine suitable traffic conditions for the IBL strategy implementation. The results indicate that for the designed scenarios, the IBL strategy is effective only when the traffic density is in the range of 25 to 74 pcu/km, which suggests that level of service C is the inflection point for implementing the IBL strategy. Copyright © 2014 John Wiley & Sons, Ltd.