共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
3.
4.
5.
为获取用于检测驾驶疲劳状态的关键指标,通过实车试验采集了驾驶员行为状态、眼动数据和车辆动态信息,对比分析了各参数对驾驶员主观疲劳状态的反映程度。对于驾驶员眼部特征检测,使用特征提取器完成人脸位置的实时跟踪,并使用 68 点面部特征检测算法标记关键点位置,估算出眼睛长宽比(EAR)。通过分类与回归树(CART)决策算法训练数据模型,实现在一定窗口期内对驾驶员眨眼行为的准确决策分类,获得眼睛闭合率(PERCLOS)
等关键眼部特征指标。在此基础之上设计了 13 种驾驶疲劳状态检测指标,并与卡罗林斯卡嗜睡量等级(KSS)这一主观疲劳程度衡量参数作相关性评价。研究结果表明: PERCLOS 与KSS 的相关性最高,相关系数为 0.83,因此借助 PERCLOS 可以较准确地判断驾驶疲劳状态。 相似文献
6.
介绍了我国交通事故、驾驶员安全教育现状和驾驶模拟器用于驾驶员安全教育的条件;提出了驾驶模拟器用于驾驶员安全教育的虚拟道路交通视景系统的组成及设计方法;分析了用于驾驶员安全教育的虚拟道路交通视景特征及驾驶模拟器用于安全教育的可行性. 相似文献
7.
为及时检测驾驶员的疲劳驾驶情况,提出了一种基于Dlib和变种Transformer的哈欠检测方法。首先,基于Dlib的人脸关键点模型构建驾驶员眼部和嘴部的哈欠特征矩阵,然后在视频检测领域提出一种变种Transformer模型对哈欠特征矩阵进行提取和分类,最后基于YawDD数据集进行验证,结果表明,所提出算法的哈欠检测准确率达96.8%,高于已有算法,适用于驾驶员疲劳驾驶时哈欠行为的检测。 相似文献
8.
9.
开发型驾驶模拟器体感模拟算法及其评价 总被引:7,自引:0,他引:7
运用开发型汽车驾驶模拟器,可在模拟的汽车驾驶环境中,研究人-车-环境闭环系统特性,从而研制出高主动安全性汽车,驾驶员的视觉,听觉,触觉及体感是模拟器的四大模拟要素,直接影响模拟器逼真度,本文提出一种驾驶员体感模拟滤波算法,并建立驾驶员体感评价模型,仿真计算的结果表明,该算法既可充分发挥体感模拟系统硬件的模拟能力,并获得满意的体感模拟逼真度,又可为研制汽车驾驶模拟器需体感模拟软件的逼真度评价提供一种行之有效的方法。 相似文献
10.
疲劳驾驶是引发道路交通事故的主要原因之一,研究利用转向盘操作行为特征检测驾驶人疲劳的方法对改善交通安全具有重要意义.研究通过分析基于驾驶模拟器的疲劳状态下的实验数据,提取了描述疲劳状态的不同特征参数,运用方差分析方法量化了不同驾驶状态下特征参数的差异性水平,优化出转向盘转角标准差、转向盘角速度标准差、转向盘转角变异系数、转向盘转角熵和零速百分比5个参数作为疲劳驾驶的有效特征参数组.建立了基于支持向量机的驾驶人疲劳状态检测模型,并采用测试集样本对搭建的模型进一步验证,结果表明该模型对驾驶人疲劳的模型检测准确率为81.33%,灵敏度为85.33%,特异度为77.33%. 相似文献
11.
12.
针对互通式立交出口可能出现的多种情况,结合工程实践,探讨其设计技术问题,提出设计思路及技术对策,并在技术分析中强调融入“安全至上”“动态设计”“灵活性设计”“宽容性设计”等设计新理念,使出口设计安全、合理. 相似文献
13.
水泥混凝土安全护栏 总被引:1,自引:0,他引:1
赵文光 《筑路机械与施工机械化》1994,11(2):9-14
通过水泥混凝土安全护栏在道路交通中的实际应用,对其结构形式和主要参数以及具体的施工方法进行了较为详实的叙述,并对比介绍了水泥混凝土安全护栏的使用效果。 相似文献
14.
盾构隧道施工风险与规避对策 总被引:7,自引:2,他引:5
归纳地铁安全事故的类型及特点,介绍目前国内外盾构隧道情况,尤其是北京盾构隧道情况,分析盾构隧道施工的优点和不足之处,论述盾构隧道施工风险研究的必要性。重点分析盾构隧道施工的11种主要风险,即:地质预报准确性、盾构机适应性和可靠性、盾构进出洞施工、开挖面失稳、盾尾密封失效、软硬不均且差异性较大地层施工、较大的地层损失及不均匀沉降、开挖面有障碍物、隧道上浮、联络通道施工、明挖基础失稳等,并一一提出切实的规避对策。同时对国内外盾构隧道施工事故典型案例的情况及原因进行详细介绍和剖析。可为今后盾构隧道施工风险的分析、预测、防范及规避提供指导。 相似文献
15.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(12):1681-1694
A bicycle or inverted pendulum can be balanced, that is kept nearly upright, by accelerating the base. This balance is achieved by steering on a bicycle. Simultaneously one can also control the lateral position of the base: changing of the track line of a bike or the position of hand under a balanced stick. We show here with theory and experiment that if the balance problem is removed, by making the system neutrally stable for balance, one cannot simultaneously maintain balance and control the position of the base. We made a bricycle, essentially a bicycle with springy training wheels. The stiffness of the training wheel suspension can be varied from near infinite, making the bricycle into a tricycle, to zero, making it effectively a bicycle. The springy training wheels effectively reduce or even negate gravity, at least for balance purposes. One might expect a smooth transition from tricycle to bicycle as the stiffness is varied, in terms of handling, balance and feel. Not so. At an intermediate stiffness, when gravity is effectively zeroed, riders can balance easily but no longer turn. Small turns cause an intolerable leaning. Thus there is a qualitative difference between bicycles and tricycles, a difference that cannot be met halfway. 相似文献
16.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(10):1575-1596
Steering feel, or steering torque feedback, is widely regarded as an important aspect of the handling quality of a vehicle. Despite this, there is little theoretical understanding of its role. This paper describes an initial attempt to model the role of steering torque feedback arising from lateral tyre forces. The path-following control of a nonlinear vehicle model is implemented using a time-varying model predictive controller. A series of Kalman filters are used to represent the driver's ability to generate estimates of the system states from noisy sensory measurements, including the steering torque. It is found that under constant road friction conditions, the steering torque feedback reduces path-following errors provided the friction is sufficiently high to prevent frequent saturation of the tyres. When the driver model is extended to allow identification of, and adaptation to, a varying friction condition, it is found that the steering torque assists in the accurate identification of the friction condition. The simulation results give insight into the role of steering torque feedback arising from lateral tyre forces. The paper concludes with recommendations for further work. 相似文献
17.
18.
19.
高速公路沥青路面养护与维修方案的选择与设计 总被引:4,自引:0,他引:4
描述系统化的高速公路沥青路面养护与维修方案选择和设计的过程和方法,包括数据的需求采集、现有路况的定性定量评价、养护措施的选择、可行养护与维修方案的生成和设计、备选方案的评估等。由于高速公路具有交通量大、社会影响大的特点,文中重点提出在选择维修方案过程中,需预先分析与不同维修方案相关的交通控制策略及施工规划组织,以对不同可行方案进行全面的评估,从中选取最佳的维修养护方案。 相似文献
20.
汽车制动过程的计算机模拟分析 总被引:5,自引:0,他引:5
通过建立汽车制动过程的数字模型,用计算机模拟分析了汽车的制动响应及各种敏感因素对它的影响,同时,进一步分析了引起汽后前后轮先后抱死拖滑的主要原因和影响程度,为汽车制动和制动稳定性的研究提供了参考。 相似文献