The choice of speed and clearance for RAS on 3D method

In this paper, a 3D source distribution technique is used to calculate the coupled motions between two ships which advance in the wave with the same speed. The numerical results of coupled motions for a frigate and a supply ship have a good agreement with the experimental results. Based on the 3D coupled motions of two ships, a spectral analysis is employed to clearly observe the effect of speed, clearance and wave heading on the significant relative motion amplitude (SRMA) of two ships.The method presented in this paper will be helpful to select suitable clearance, speed and wave heading for underway replenishment at sea(RAS).     

航行于波浪中的肥大型船波浪增阻计算研究(英文)

Under the background of the energy saving and emission reduction, more and more attention has been placed on investigating the energy efficiency of ships. The added resistance has been noted for being crucial in predicting the decrease of speed on a ship operating at sea. Furthermore, it is also significant to investigate the added resistance for a ship functioning in short waves of large modern ships. The researcher presents an estimation formula for the calculation of an added resistance study in short waves derived from the reflection law. An improved method has been proposed to calculate the added resistance due to ship motions, which applies the radiated energy theory along with the strip method. This procedure is based on an extended integral equation (EIE) method, which was used for solving the hydrodynamic coefficients without effects of the irregular frequency. Next, a combined method was recommended for the estimation of added resistance for a ship in the whole wave length range. The comparison data with other experiments indicate the method presented in the paper provides satisfactory results for large blunt ship.     

17000载重吨油船结构疲劳分析的快速估算方法(英文)

Fatigue cracks and fatigue damage have been important issues for ships and offshore structures for a long time.However,in the last decade,with the introduction of higher tensile steel in hull structures and increasingly large ship dimensions,the greater attention should be paid to fatigue problems.Most research focuses on how to more easily access the fatigue strength of ships.Also,the major classification societies have already released their fatigue assessment notes.However,due to the complexity of factors influencing fatigue performances,such as wave load and pressure from cargo,the combination of different stress components,stress on concentration of local structure details,means stress,and the corrosive environments,there are different specifications with varying classification societies,leading to the different results from different fatigue assessment methods.This paper established the Det Norske Veritas(DNV) classification notes "fatigue assessment of ship structures" that explains the process of fatigue assessment and simplified methods.Finally,a fatigue analysis was performed by use data of a real ship and the reliability of the result was assessed.     

在海上航运中用于位置感知管理和控制系统的可重用C++类的开发(英文)

Location aware management and location based automation are fast upcoming technologies which are facilitated by availability of reliable, accurate, and cheap global positioning systems and location based services. This paper discusses the development of C++ classes, which may be used for development of software for location aware management and control, specifically in merchant shipping, so as to provide improved safety, increased automation, prevention of pollution and reducing the work burden of the crew. The GPS is used in conjunction with the regionally accessible nested global shorelines (RANGS) dataset for this purpose. The design of two main C++ classes named CShorelines and CGPSInput have been discussed. A control system mandatory on all oil-tankers above 150 GRT (and few other vessels) called ODMCS has been made location aware using the novel software developed and the results obtained have been critically examined and presented.     

支持向量机和遗传算法组合策略的VLCC船中结构优化设计(英文)

In this paper a hybrid process of modeling and optimization,which integrates a support vector machine(SVM) and genetic algorithm(GA),was introduced to reduce the high time cost in structural optimization of ships.SVM,which is rooted in statistical learning theory and an approximate implementation of the method of structural risk minimization,can provide a good generalization performance in metamodeling the input-output relationship of real problems and consequently cuts down on high time cost in the analysis of real problems,such as FEM analysis.The GA,as a powerful optimization technique,possesses remarkable advantages for the problems that can hardly be optimized with common gradient-based optimization methods,which makes it suitable for optimizing models built by SVM.Based on the SVM-GA strategy,optimization of structural scantlings in the midship of a very large crude carrier(VLCC) ship was carried out according to the direct strength assessment method in common structural rules(CSR),which eventually demonstrates the high efficiency of SVM-GA in optimizing the ship structural scantlings under heavy computational complexity.The time cost of this optimization with SVM-GA has been sharply reduced,many more loops have been processed within a small amount of time and the design has been improved remarkably.     

Electric Propulsion and Dynamic Positioning Significantly Improve the Total Performance of a Ship

In 1935, the Nomandie won the Blue Ribbon for a transatlantic crossing at 30.31 knots, with a 120,000kW electric propulsion system supplied by ALSTOM. Since then, the advance of power electronics mainly in the field of AC drives has allowed more ships to befitted with electric propulsion. This paper describes the ALSTOM products used in the Diesel-electric propulsion system, Mermaid Pod system, dynamic positioning system and their influences on the ship performances.     

Dynamic interaction of parallel moving ships in close proximity

Nowadays,there are many studies conducted in the field of marine hydrodynamics which focus on two vessels traveling and floating in sufficiently close proximity to experience significant interactions.The hydrodynamic behavior of parallel moving ships in waves is an interesting and important topic of late.A numerical investigation has been carried out for the prediction of wave exciting forces and motion responses of parallel moving ships in regular waves.The numerical solution was based on 3D distribution technique and using the linear wave theory to determine the exciting forces and ship＇s motion.The speed effects have been considered in the Green function for more realistic results.The numerical computations of wave exciting forces and motion responses were carried out for a Mariner and Series 60 for the purpose of discovering different Froude numbers and different separation distances in head sea conditions.Based on the numerical computations,it was revealed that the sway,roll and yaw have a significant effect due to hydrodynamic interaction.     

纵向弯矩下材料随机特性对复合材料船体可靠性的影响

The effects of stochastic characteristics of materials on the reliability of ship hulls made of composite materials under longitudinal moment were extensively studied using reliability and sensitivity calculations of a composite ship hull which was sagging.The reliability indices and failure probabilities of the ship in three kinds of failure modes (buckling,material failure,and ultimate collapse) were calculated by the surface response method and JC method.The importance factors of random variables in stochastic models,such as the model errors in predicting the ultimate longitudinal strength of ship and the longitudinal bending moment that the ship withstands,as well as the stochastic characteristics of materials in the models used,were calculated.Then,the effects of these random variables,including the stochastic characteristics of materials on the reliability index and the failure probability of ships which were sagging,were discussed with their importance factors.The results show that the effects of stochastic characteristics of materials on the reliability of ship hulls made of composite materials should be considered during the reliability assessment of composite ships.Finally,some conclusions and recommendations were given for high-speed ship design and safety assessment.     

Hydrodynamic interactions between two bodies in waves in 3D time domain

In this paper, a 3D time domain technique is adopted to calculate the coupled hydrodynamic interaction between two bodies without flare in waves. For verifying the code, two same cylinders are selected to calculate coupled hydrodynamic effects by comparison with the results obtained by 3D frequency method which has been proved to be efficient for solving such problems. In order to improve efficiency of calculation, the effect of history time has been discussed, and an improved method is presented. Moreover, the effect of lateral separation distance is also discussed in detail. The technique developed here may serve as a more rigorous tool to analyze the related transient problems of two ships doing underway replenishment in waves.     

采用沿岸动力概念以减少埃及红海海域高速船燃料消耗与降低排放(英文)

The progress of economic globalization,the rapid growth of international trade,and the maritime transportation has played an increasingly significant role in the international supply chain.As a result,worldwide seaports have suffered from a central problem,which appears in the form of massive amounts of fuel consumed and exhaust gas fumes emitted from the ships while berthed.Many ports have taken the necessary precautions to overcome this problem,while others still suffer due to the presence of technical and financial constraints.In this paper,the barriers,interconnection standards,rules,regulations,power sources,and economic and environmental analysis related to ships,shore-side power were studied in efforts to find a solution to overcome his problem.As a case study,this paper investigates the practicability,costs and benefits of switching from onboard ship auxiliary engines to shore-side power connection for high-speed crafts called Alkahera while berthed at the port of Safaga,Egypt.The results provide the national electricity grid concept as the best economical selection with 49.03 percent of annual cost saving.Moreover,environmentally,it could achieve an annual reduction in exhaust gas emissions of CO2,CO,NOx,P.M,and SO2by 276,2.32,18.87,0.825 and 3.84 tons,respectively.     

Dynamic analysis of multibodies system with a floating base for rolling of ro-ro ship caused by wave and slip of heavy load

Common effect of wave and slip of internal heavy load will make rolling of the roll-on ship serious. This is one of the important reasons for overturn of ro-ro ships. The multibodies System with a floating base is composed of ro-ro ship and slipping heavy load. This paper takes the rolling angle of the ship and the transverse displacement of the heavy load on desk as two freedoms. Making use of analysis of apparent gravitation and apparent buoyaney, the wave rolling moment is derived. By use of dynamic method of multibodies system with a floating base, dynamic equations of the system are established. Taking a certain channel ferry as an example, a set of numerical calculation have been carried out for rolling response of the ship and displacement response of the slipping heavy load under common effect of synchro-slipping heavy loads and wave.     

低阻通风船体的远程控制测试平台开发（英文）

This paper addresses the development and testing of a remotely controlled boat platform with an innovative air-ventilated hull. The application of air cavities on the underside of ship hulls is a promising means for reducing hydrodynamic drag and pollutant emissions and increasing marine transportation efficiency. Despite this concept’s potential, design optimization and high-performance operation of novel air-cavity ships remain a challenging problem. Hull construction and sensor instrumentation of the model-scale air-cavity boat is described in the paper. The modular structure of the hull allows for easy modifications, and an electric propulsion unit enables self-propelled operation. The boat is controlled remotely via a radio transmission system. Results of initial tests are reported, including thrust, speed, and airflow rate in several loading conditions. The constructed platform can be used for optimizing air-cavity systems and testing other innovative hull designs. This system can be also developed into a high-performance unmanned boat.     

硬帆辅助推进散货船的稳定性和动力性能综合分析（英文）

The wind-assisted propulsion system is becoming one of the most popular and efficient ways to reduce both fuel consumption and carbon dioxide emission from the ships.In this study,several analyses have been carried out on a model of bulk carrier fitted with five rigid sails with a 180° rotating mechanism for maximum usage of wind power and a telescopic reefing mechanism for folding it during berthing.The stability of the ship has been verified through the calculations of initial stability,static stability,and dynamic stability through the fulfillment of the weather criterion using MAXSURF software.The structural analysis of the sail was carried out in ANSYS static structural module.Several flow simulations were carried out in ANSYS fluent module to predict the thrusts produced by the sails at different apparent wind angles,which would in turn reduce the thrust required from the propeller.In this way,the brake horse powers required for different sail arrangements were analyzed to find out a guideline for this wind propulsion system to generate better powering performances.To consider drift and yaw effect on propulsion system,an MMG mathematical model-based simulation was carried out for different drift angles of motion of the ship considering hard sail-based wind loads.Through these analyses,it has been found out that the hard sail-based wind-assisted propulsion system in some cases have produced a reduction of more than 30% brake power in straight ahead motion and around 20% reduction in case of drifting ships compared to the model having no sails.     

ISS-based robust adaptive fuzzy algorithm for maintaining a ship's track

This paper focuses on the problem of linear track keeping for marine surface vessels. The influence exerted by sea currents on the kinematic equation of ships is considered first. The input-to-state stability(ISS) theory used to verify the system is input-to-state stable. Combining the Nussbaum gain with backstepping techniques,a robust adaptive fuzzy algorithm is presented by employing fuzzy systems as an approximator for unknown nonlinearities in the system. It is proved that the proposed algorithm that guarantees all signals in the closed-loop system are ultimately bounded. Consequently,a ship's linear track-keeping control can be implemented. Simulation results using Dalian Maritime University's ocean-going training ship 'YULONG' are presented to validate the effectiveness of the proposed algorithm.     

基于模糊集合的船舶燃气轮机临界因素的Dematel评估方法（英文）

In power production, gas turbines are commonly used components that generate high amount of energy depending on size and weight. They function as integral parts of helicopters, aircrafts, trains, ships, electrical generators, and tanks. Notably, many researchers are focusing on the design, operation, and maintenance of gas turbines. The focal point of this paper is a DEMATEL approach based on fuzzy sets, with the attempt to use these fuzzy sets explicitly. Using this approach, the cause–effect diagram of gas turbine failures expressed in the literature is generated and aimed to create a perspective for operators. The results of the study show that, "connecting shaft has been broken between turbine and gear box" selected the most important cause factor and"sufficient pressure fuel does not come for fuel pump" is selected the most important effect factor, according to the experts.     

ISS-based robust adaptive fuzzy algorithm for maintaining a ship＇s track

This paper focuses on the problem of linear track keeping for marine surface vessels. The influence exerted by sea currents on the kinematic equation of ships is considered first. The input-to-state stability （ISS） theory used to verify the system is input-to-state stable. Combining the Nussbaum gain with backstepping techniques, a robust adaptive fuzzy algorithm is presented by employing fuzzy systems as an approximator for unknown nonlinearities in the system. It is proved that the proposed algorithm that guarantees all signals in the closed-loop system are ultimately bounded. Consequently, a ship＇s linear track-keeping control can be implemented. Simulation results using Dalian Maritime University＇s ocean-going training ship ＇YULONG＇ are presented to validate the effectiveness of the proposed algorithm.     

Key technologies of ship remote control system in inland waterways under ship-shore cooperation conditions北大核心CSCD

［Objective ］ To meet the requirements of remotely controlling ship in curved, narrow and crowded inland waterways, this paper proposes an approach that consists of CNN-based algorithms and knowledge based models under ship-shore cooperation conditions. ［Method］On the basis of analyzing the characteristics of ship-shore cooperation, the proposed approach realizes autonomous perception of the environment with visual simulation at the core and navigation decision-making control based on deep reinforcement learning, and finally constructs an artificial intelligence system composed of image deep learning processing, navigation situation cognition, route steady-state control and other functions. Remote control and short-time autonomous navigation of operating ships are realized under inland waterway conditions, and remote control of container ships and ferries is carried out. ［Results］The proposed approach is capable of replacing manual work by remote orders or independent decision-making, as well as realizing independent obstacle avoidance, with a consistent deviation of less than 20 meters. ［Conclusions］The developed prototype system carries out the remote control operation demonstration of the above ship types in such waterways as the Changhu Canal Shenzhou line and the Yangtze River, proving that a complete set of algorithms with a CNN and reinforcement learning at the core can independently extract key navigation information, construct obstacle avoidance and control awareness, and lay the foundation for inland river intelligent navigation systems. © 2022 Journal of Clinical Hepatology. All rights reserved.     

Statistical Analysis of Ship Collisions with Bridges in China Waterway

Having carried out investigations on ship collision accidents with bridges in waterway in China, a database of ship collision with bridge (SCB) is developed in this paper. It includes detailed information about more than 200 accidents near ship' s waterways in the last four decades, in which ships collided with the bridges. Based on the information a statistical analysis is presented tentatively. The increase in frequency of ship collision with bridges appears, and the accident quantity of the barge system is more than that of single ship. The main reason of all the factors for ship collision with bridge is the human errors, which takes up 70%. The quantity of the accidents happened during flooding period shows over 3 - 6 times compared with the period from March to June in a year. The probability follows the normal distribution according to statistical analysis. Visibility, span between piers also have an effect on the frequency of the accidents.     

Design of multi-module experiment-rig of vessel electrical propulsion prime mover

Combined power plant is widely used in large or medium surface vessel for its predominant performance. It is important to research on using combined power plant as electrical propulsion prime mover for developing the electric propulsion warship. This paper, designs a multi-module experiment-rig and introduces its composition, working principle and disposition scheme, and carried out the dynamic characteristic experiment of the GTD350 gas turbine.     

3-D computational method of wave loads on turret moored FPSO tankers

A three-dimensional method of calculating wave loads of turret moored FPSO (Floating Production Storage and Offloading) tankers is presented. The linearized restoring forces acting on the ship hull by the mooring system are calculated according to the catenary theory, which are expressed as the function of linear stiffness coefficients and the displacements of the upper ends of mooring chains. The hydrodynamic coefficients of the ship are calculated by the three-dimensional potential flow theory of the linear hydrodynamic problem for ships with a low forward speed. The equations of ship motions are established with the effect of the restoring forces from the mooring system included as linear stiffness coefficients. The equations of motions are solved in frequency domain, and the responses of wave-induced motions and loads on the ship can be obtained. A computer program based on this method has been developed, and some calculation examples are illustrated. Analysis results show that the method can give satisfying prediction of wave loads.