Parametric study on the effects of pile inclination angle on the response of batter piles in offshore jacket platforms

Offshore jacket-type platforms are attached to the seabed by long batter piles. In this paper, results from a finite element analysis, verified against experimental data, are used to study the effect of the pile’s inclination angle, and its interaction with the geometrical properties of the pile and the geotechnical characteristics of the surrounding soil on the behavior of the inclined piles supporting the jacket platforms. Results show that the inclination angle is one of the main parameters affecting the behavior of an offshore pile. We investigated the effect of the inclination angle on the maximum von Mises stress, maximum von Mises elastic strain, maximum displacement vector sum, maximum displacement in the horizontal direction, and maximum displacement in the vertical direction. The pile seems to have an operationally optimal degree of inclination of approximately 5°. By exceeding this value, the instability in the surrounding soil under applied loads grows extensively in all the geotechnical properties considered. Cohesive soils tend to display poorer results compared to grained soils.     

Vehicle trajectory challenge in predictive active steering rollover prevention

High center of mass vehicles are likely to rollover in extreme maneuvers. Available works present control strategies to prevent rollover. In these works, however, other important parameters such as path trajectory tracking are not a main concern. In this paper conflicts between rollover prevention and trajectory tracking is investigated. Model predictive control (MPC) is adopted to predict and avoid rollover while tracking desired trajectory. For this regard a model based future error estimation is introduced. The control framework predicts both rollover and trajectory error simultaneously. It avoids rollover while tries to track the trajectory. Simulation results for two controllers with and without trajectory tracking are presented. The results indicate that the controllers effectively limit rollover as a hard constraint while the trajectory tracking controller also minimizes and recovers the path error.     

A multi-objective train scheduling model and solution

This paper develops a multi-objective optimization model for the passenger train-scheduling problem on a railroad network which includes single and multiple tracks, as well as multiple platforms with different train capacities. In this study, lowering the fuel consumption cost is the measure of satisfaction of the railway company and shortening the total passenger-time is being regarded as the passenger satisfaction criterion. The solution of the problem consists of two steps. First the Pareto frontier is determined using the -constraint method, and second, based on the obtained Pareto frontier detailed multi-objective optimization is performed using the distance-based method with three types of distances. Numerical examples are given to illustrate the model and solution methodology.     

船首形状对自由液面水下航行体阻力影响的试验研究（英文）

In this paper, towing tank experiments are conducted to study the behavior of flow on a model of the underwater vehicle with various shapes of bows, i.e. tango and standard bows in free surface motion tests. The total resistances for different Froude numbers are considered experimentally. The towing tank is equipped with a trolley that can operate in through 0.05–6 m/s speed with ±0.02 m/s accuracy. Furthermore, the study is done on hydrodynamic coefficients i.e. total, residual and friction resistance coefficients, and the results are compared. Finally, the study on flow of wave fields around bows is done and wave filed around two bows are compared. The Froude number interval is between 0.099 and 0.349. Blockage fraction for the model is fixed to 0.005 3. The results showed that the residual resistance of the standard bow in 0.19 to 0.3 Froude number is more than the tango bow in surface motion which causes more total resistance for the submarine. Finally, details of wave generated by the bow are depicted and the effects of flow pattern on resistance drag are discussed.     

Dynamic adaptive finite element analysis of acoustic wave propagation due to underwater explosion for fluid-structure interaction problems

In this paper, an investigation into the propagation of far field explosion waves in water and their effects on nearby structures are carried out. For the far field structure, the motion of the fluid surrounding the structure may be assumed small, allowing linearization of the governing fluid equations. A complete analysis of the problem must involve simultaneous solution of the dynamic response of the structure and the propagation of explosion wave in the surrounding fluid. In this study, a dynamic adaptive finite element procedure is proposed. Its application to the solution of a 2D fluid-structure interaction is investigated in the time domain. The research includes: a) calculation of the far-field scatter wave due to underwater explosion including solution of the time-depended acoustic wave equation, b) fluid-structure interaction analysis using coupled Euler-Lagrangian approach, and c) adaptive finite element procedures employing error estimates, and re-meshing. The temporal mesh adaptation is achieved by local regeneration of the grid using a time-dependent error indicator based on curvature of pressure function. As a result, the overall response is better predicted by a moving mesh than an equivalent uniform mesh. In addition, the cost of computation for large problems is reduced while the accuracy is improved.     

Factors contributing to the severity of intersection crashes

Road crashes are a leading cause of death and serious injuries both developed and developing countries. Intersections are recognized as being among the most hazardous locations on the roads. Although crashes at intersections form about 35 % of the reported accidents account for about 32% of traffic‐related serious injuries and fatalities in Singapore, there is no known study that examines the factors contributing to the severity of these crashes. In this study, the ordinal probit model was applied to crash data from 1992 to 2002 to investigate the role a variety of factors play in determining the severity of intersection crashes. Our study shows that vehicle type, road type, collision type, driver's characteristics and time of day are important determinants of the severity of crashes at intersections in Singapore.     

Optimal fueling strategies for locomotive fleets in railroad networks

Railroad companies spend billions of dollars each year to purchase fuel for thousands of locomotives across the railroad network. Each fuel station charges a site-dependent fuel price, and the railroad companies must pay an additional flat contracting fee in order to use it. This paper presents a linear mixed-integer mathematical model that integrates not only fuel station location decisions but also locomotive fueling schedule decisions. The proposed model helps railroads decide which fuel stations to contract, and how each locomotive should purchase fuel along its predetermined shipment path, such that no locomotive runs out of fuel while the summation of fuel purchasing costs, shipment delay costs (due to fueling), and contracting charges is minimized. A Lagrangian relaxation framework is proposed to decompose the problem into fueling schedule and facility location selection sub-problems. A network shortest path formulation of the fueling schedule sub-problem is developed to obtain an exact optimal solution to the fueling schedule sub-problem. The proposed framework is applied to a large-scale empirical case and is shown to effectively reduce system costs.     

A numerical investigation into strength and deformation characteristics of preloaded tubular members under lateral impact loads

This paper presents the results of a numerical investigation into the structural behaviour of preloaded tubular members under lateral impact loads by means of finite element method. The lateral load represents a statically modelled impact from collision between tubular member and a solid rectangular indenter. Three different kinds of end conditions have been applied to the model and the effects of boundary conditions are investigated. Also, the effect of preloading on the buckling strength as well as the ultimate strength for laterally impacted tubes is assessed and it will be shown that preloading and position of applying force directly affect these strengths. In other words, by increasing in the amount of preloading, ultimate strength reduces and member tends to collapse under lower amounts of loads. The influence of the position of applying lateral load has also been addressed and relevant results will be discussed. In order to verify the performance of numerical model, the results have been examined against an available experimental test.     

Evaluation of the effect of cooperative infrastructure-to-vehicle systems on driver behavior

In-vehicle technologies and co-operative services have potential to ease congestion problems and improve traffic safety. This paper investigates the impact of infrastructure-to-vehicle co-operative systems, case of CO-OPerative SystEms for Intelligent Road Safety (COOPERS), on driver behavior. Thirty-five test drivers drove an instrumented vehicle, twice, with and without the system. Data related to driving behavior, physiological measurements, and user acceptance was collected. A macro-level approach was used to evaluate the potential impact of such systems on driver behavior and traffic safety. The results in terms of speeds, following gaps, and physiological measurements indicate a positive impact. Furthermore, drivers’ opinions show that the system is in general acceptable and useful.     

Estimating intersection O-D matrices from observed time-series of traffic counts: The zellner estimator

The problem of estimating intersection O-D matrices from input and output time-series of traffic counts is considered in this paper. Because of possible existence of significant correlation between the error terms across structural equations forming the O-D matrices, the seemingly unrelated estimator (Zellner estimator) was suggested. Estimation results showed evidence of strong correlation between error terms across-equations. Generally, the Zellner estimator produced more efficient estimates than did the ordinary least-squares estimator. Furthermore, the Zellner estimator satisfied all constraints and reproduced turning movements comparable to the actual ones.