国Ⅳ之后柴油机三种燃油喷射系统对比及其技术发展趋势

系统地介绍了电控泵喷嘴系统、电控单体泵系统、电控共轨系统的结构及牛寺｜点。阐述了电控燃油喷射系统的技术发展趋势。     

喷油泵装配线中拧紧技术的研究及应用

本论文介绍了拧紧技术的原理和方法,以及拧紧技术在喷油泵装配线中的应用.最后说明了拧紧程序在喷油泵装配线中的程序防错方法.     

英汉产品说明书照应手段比较研究

本文对英汉衔接手段中的照应进行了详细的对比研究,并通过产品说明书的翻译实例进行剖析验证。通过英汉说明书的照应的对比分析得出产生共同点和不同点的原因,以及针对不同之处而采取的翻译策略。翻译策略有相关的产品说明书的实例进行说明,还对照应的翻译策略进行了简要的总结概括。     

Comparing rail fuel efficiency with truck and waterway

This paper presents a railroad energy efficiency model used to estimate the fuel economies for classes of trains transporting various commodities. Comparable procedures are used to estimate truck and waterway fuel consumption. The results show that coal unit trains are 4.5–5.0 times more energy efficient than movements in the largest trucks allowed in the eastern and western regions of the US, unit grain train movements in the central US are 4.6 times more fuel efficient, soda ash unit train and non-unit train shipments are 4.9 and 3.2 times more efficient, and ethanol unit train and non-unit train movements are 4.8 and 3.0 times more efficient. In terms of barge traffic, coal unit train and non-unit train are 1.3 and 0.9 times as energy efficient in the eastern US, grain unit train and non-unit train movements are 1.7 and 1.0 times more efficient from Minneapolis to the Gulf of Mexico, and grain unit train and non-unit train movements are 1.0 and 0.7 times more fuel efficient from the Upper Ohio River to the Gulf of Mexico.     

An investigation of the performance of an electronic in-line pump system for diesel engines

WIT Electronic Fuel System Co., Ltd. has developed a new fuel injector, the Electronic In-line Pump （EIP） system, designed to meet China＇s diesel engine emission and fuel economy regulations. It can be used on marine diesel engines and commercial vehicle engines through different EIP systems. A numerical model of the EIP system was built in the AMESim environment for the purpose of creating a design tool for engine application and system optimization. The model was used to predict key injection characteristics under different operating conditions, such as injection pressure, injection rate, and injection duration. To validate these predictions, experimental tests were conducted under the conditions that were modeled. The results were quite encouraging and in agreement with model predictions. Additional experiments were conducted to study the injection characteristics of the EIP system. These results show that injection pressure and injection quantity are insensitive to injection timing variations, this is due to the design of the constant velocity cam profile. Finally, injection quantity and pressure vs. pulse width at different cam speeds are presented, an important injection characteristic for EIP system calibration.     

Combustion development of a Bi-Fuel engine

Environmental improvement and energy issues are increasingly becoming more important as worldwide concerns. Natural gas is a good alternative fuel that can help to improve these issues because of its large quantity and clean burning characteristics. This paper provides the experimental performance results of a Bi-Fuel engine that uses Compressed Natural Gas as its Primary fuel and gasoline as its secondary fuel. This engine is a modification of the basic 1.4-liter gasoline engine. Generally, on the unmodified base engine, torque and power for CNG fuel are considerably lower than gasoline fuel. In this paper, the influence of fuels on wall temperature, performance and emissions are investigated.     

汽车空调油耗试验分析及研究

汽车空调作为整车内部主要耗能附件,对用户实际使用油耗的影响巨大,有着很大的节能潜力。文章基于WLTC循环,采用不同试验方案,对多辆轻型车进行空调油耗,考察国内多款主流车型的空调油耗水平及空调制冷效果,验证压缩机排量和车辆前端密封导流对空调油耗的影响。结果表明:1)空调能耗占比较大,不容忽视,不同车辆的空调能耗占比总体分布在22%左右。2)多数车辆无法达到10min时头部平均温度达到23℃的要求,无法获得节能效果值。3)适当降低压缩机排量和增加车辆前端密封导流都具有一定的节油效果。     

柴油超临界喷雾大涡数值模拟研究

随着现代内燃机燃烧室内温度和压力的不断提升,液体燃料往往处于超临界状态,与亚临界状态相比,其喷雾射流行为特征发生了很大的变化。本研究采用大涡数值模拟方法对超临界环境下的单组分和多组分柴油表征燃料喷雾射流进行数值计算,对比了不同气体状态方程预测柴油表征燃料超临界射流行为的差异性,发现PR气体状态方程对正庚烷质量分数分布的模拟结果与实验值更接近,相较于其他状态方程表现更好;另外还发现本研究采用的多组分柴油表征燃料(正庚烷质量分数80%、甲苯质量分数10%、环己烷质量分数10%)可较好地反映超临界环境下真实柴油喷雾射流特征。     

电动燃油泵换向器磨损原因分析和解决方案

由于乙醇汽油的应用，电动燃油泵的铜换向器磨损加速，严重影响了该产品的寿命，本文对磨损加速的原因进行分析，并提出解决方案。     

乘用车后碰撞安全模拟与结构设计研究

针对我国乘用车后碰撞燃油系统安全要求的强制性标准,研究了乘用车后碰撞安全的一般设计方法。通过某车型三厢改两厢的改型开发案例,利用有限元分析方法,分析验证了改型车的燃油系统安全性。从中总结了乘用车后碰撞安全结构设计的一些原则与要点。