直线感应电动机数据采集系统

针对用于磁悬浮列车的直线感应电动机实验台,介绍了一套对直线感应电动机实验数据进行采集、分析和处理的数据采集系统。该系统可对实验中的各种数据进行实时采集、显示、控制、存储和分析。     

京秦线提速路涵过渡段动力仿真与试验对比

结合京秦线提速改造工程进行了列车 路基动力仿真计算。在不同速度条件下,通过对路涵过渡段加固前后状态下机车车辆运行安全舒适性指标、轨道及路基主要动力性能指标的分析计算,对京秦既有线路涵过渡段提速到200km/h的适应性及加固方案的可行性提出了相应评价意见与建议,并与随后的实车试验进行了对比。试验测试结果验证了仿真分析的可靠性。     

Dynamics of ships running aground

A comprehensive dynamic model is presented for analysis of the transient loads and responses of the hull girder of ships running aground on relatively plane sand, gravel, or rock sea bottoms. Depending on the seabed soil characteristics and the geometry of the ship bow, the bow will plow into the seabed to some extent. The soil forces are determined by a mathematical model based on a theory for frictional soils in rupture and dynamic equilibrium of the fluid phase in the saturated soil. The hydrodynamic pressure forces acting on the decelerated ship hull are determined by taking into account the effect of shallow water. Hydrodynamic memory effects on the transient hull motions are modeled by application of an impulse response technique. The ship hull is modeled as an elastic beam to determine the structural response in the form of flexural and longitudinal stress waves caused by the transient ground reaction and hydrodynamic forces. A number of numerical analysis results are presented for a VLCC running aground. The results include bow trajectory in the seabed, time variation of the grounding force, and the maximum values of the sectional shear forces and bending moments in the hull girder.     

尾管密封失效分析

本文对船舶常用尾管密封装置构造了“失效树”，应用FAT方法对影响密封失效的因素进行了定性分析，着重讨论了轴系振动的影响。     

电压型逆变器输出电压检测与数字滤波方法研究

针对实时、准确地检测电压型逆变器输出电压基波比较困难的问题，从检测逆变器的直流支撑电压入手，提出了一种根据控制器的输出脉冲序列，利用ＤＳＰ进行实时计算逆变器输出电压基波瞬时输出值的新方案，试验结果证明了方案的可行性。     

铁路行车事故分析中的语音压缩方法

在铁路运输中，安全行车是第一位的。一旦出现行事事故，对事故原因的分析往往十分棘手。采用黑匣子技术能够准确地记录列车运行中的各种信息，但巨大的语音存储量需求是黑匣子技术的一个难关。若采用传统的语音压缩技术，则理论和实现都很复杂，并且成本太高。采用神经网络不仅简单易行，还有提高信噪比的功能。     

内燃机连杆设计计算的若干理论研究

在对多种连杆大量计算的基础上，总结了连杆设计的经验，指出连杆大端对称于中心线的两侧刚度分布均匀，是保证其应力分布均匀的前提，是连杆合理设计的一个重要原则．文中提出，为了保证精度，连杆计算应采用多体接触模型，并对影响计算精度的各种因素做了分析。讨论了螺栓位置和预紧力应如何选取以及齿形制造误差对强度的影响。     

增力式多向镦锻装置的研制

在通用压机上生产类似全纤维曲轴一类锻件的先进工艺为多向镦锻法。本文设计的新型增力式多向钮锻装置，在锻造接近结束时，可以增大水平锹粗力，其增力效果超过传统的ＲＲ锻造法及ＴＲ锻造法。     

流函数法在减径拔管上限分析中的应用

应用流函数法建立减径拔管的动可容速度场，用上限原理得出减径拔管的上限解，分析了摩擦状态，变形程度及相对壁厚等工艺参数对拉拔载荷的影响，从而得出最佳工艺参数。     

Dynamic Simulation of a Smart Crank and Slider Mechanism

In this paper, a smart crank and slider mechanism is analyzed mostly from a dynamic view. By means of dynamic explicit finite element method, 3D nonlinear structure is simulated. It is proved that the mechanism can effectively accomplish smart movement prescribed. And in order to ensure reciprocal movement with higher frequency, measures should be taken to avoid over heating of parts. Compared with internal energy, kinetic energy of total rigid body is dominating, and Y direction equivalent rigid velocity is much higher than X direction velocity. Equivalent rigid velocity of all parts is consistent with respective movement condition. For both energy and velocity, slider effect is dominating. Three direction equivalent inertia force oscillates. Force amplitude in Y -direction is comparitively the greatest.