宽浅河道低水头水电枢纽口门区通航水流条件研究

根据重力相似准则,采用比尺为1∶100的整体模型,进行某宽浅河道低水头水电枢纽口门区的通航安全性研究。采用ADV三维流速测量系统进行流速测量;采用标准矩形量水堰控制模型流量;采用差动式尾门调节模型水位。由于河道地形及枢纽布置的原因,上游口门区流速过大,下游口门区形成大范围回流。通过扩大河道过流面积,移除下游河道中心连续小岛,增加闸孔等措施,减小下泄水流流速,改善河道整体水流状态;通过加长导航墙,改变导航墙透水面积,优化口门区域地形等措施极大地改善了船闸上下游引航道及口门区通航水流条件,确保过闸船舶的安全。     

城市轨道交通槽形梁设计参数优化研究

以跨径为30 m的城市轨道交通槽形梁为研究对象,采用精细化有限元方法研究槽形梁设计几何参数梁高、道床板厚度及角隅斜率对其力学性能的影响。分析结果表明:槽形梁主梁截面刚度随梁高的增加而增加,在给定跨径30 m的情况下存在最佳梁高1.8 m;道床板厚度与横向跨度有关,横向跨度为4 m时,适宜的道床板厚度是0.26 m;角隅斜率对槽形梁的影响主要表现在结合处的力学性能,推荐使用1:(2.5~3.0)。     

An optimal data-splitting algorithm for aircraft scheduling on a single runway to maximize throughput

In this research, we present a data-splitting algorithm to optimally solve the aircraft sequencing problem (ASP) on a single runway under both segregated and mixed-mode of operation. This problem is formulated as a 0–1 mixed-integer program (MIP), taking into account several realistic constraints, including safety separation standards, wide time-windows, and constrained position shifting, with the objective of maximizing the total throughput. Varied scenarios of large scale realistic instances of this problem, which is NP-hard in general, are computationally difficult to solve with the direct use of commercial solver as well as existing state-of-the-art dynamic programming method. The design of the algorithm is based on a recently introduced data-splitting algorithm which uses the divide-and-conquer paradigm, wherein the given set of flights is divided into several disjoint subsets, each of which is optimized using 0–1 MIP while ensuring the optimality of the entire set. Computational results show that the difficult instances can be solved in real-time and the solution is efficient in comparison to the commercial solver and dynamic programming, using both sequential, as well as parallel, implementation of this pleasingly parallel algorithm.     

大型蓄电池修复装置的信号调理技术研究

为提高大型铅酸落后蓄电池修复装置的控制性能和修复效果,分析了蓄电池修复装置的布局特点,研究修复装置信号调理系统,设计了信号调理系统的各组成模块,应用信号调理工控机及数据采集卡模块,集成了先进、有效的大型蓄电池修复装置信号调理系统,为蓄电池修复装置提高电池的容量,发挥修复效果奠定基础。     

基于NFFD 算法的船体几何变形技术

本文以非均匀有理B样条基函数作为参数体属性,并结合非均匀控制点网格,建立了适用于船体几何的NFFD变形技术。重点阐述了NFFD方法的基本原理和变形规则,并以矩阵表示方法为基础构建了数学模型。研究了控制点数量和分布对变形结果的影响,增加了控制点变形几何的能力并获得了更大的设计空间。最后,以某CNG运输船为例完成了球鼻艏、船艏和船艉部分几何的自动变形。本文的工作为船型优化提供了良好的变形工具。     

轨道交通信号控制系统LCC估算方法研究与应用

从产品全生命周期成本概念出发,阐述了轨道交通信号控制系统生命周期的特点和成本构成;从企业视角提出了一种轨道交通信号控制系统的LCC估算方法;通过企业项目成本管理信息化系统统计产晶LCC的各项数据,结合财务数据进行归一化估算,并定期进行回归迭代,规范化实施分析与评价,从而得出产話的LCC改进建议,为公司战略决策提供了重要参考依据。     

Multi-criteria optimization of traffic signals: Mobility,safety, and environment

Two-dimensional multi-objective optimizations have been used for decades for the problems in traffic engineering although only few times so far in the optimization of signal timings. While the other engineering and science disciplines have utilized visualization of 3-dimensional Pareto fronts in the optimization studies, we have not seen many of those concepts applied to traffic signal optimization problems. To bridge the gap in the existing knowledge this study presents a methodology where 3-dimensional Pareto Fronts of signal timings, which are expressed through mobility, (surrogate) safety, and environmental factors, are optimized by use of an evolutionary algorithm. The study uses a segment of 5 signalized intersections in West Valley City, Utah, to test signal timings which provide a balance between mobility, safety and environment. In addition, a set of previous developed signal timing scenarios, including some of the Connected Vehicle technologies such as GLOSA, were conducted to evaluate the quality of the 3-dimensional Pareto front solutions. The results show success of 3-dimensinal Pareto fronts moving towards optimality. The resulting signal timing plans do not show large differences between themselves but all improve on the signal timings from the field, significantly. The commonly used optimization of standard single-objective functions shows robust solutions. The new set of Connected Vehicle technologies also shows promising benefits, especially in the area of reducing inter-vehicular friction. The resulting timing plans from two optimization sets (constrained and unconstrained) show that environmental and safe signal timings coincide but somewhat contradict mobility. Further research is needed to apply similar concepts on a variety of networks and traffic conditions before generalizing findings.     

汽车前照灯闪烁问题分析及设计优化

汽车前照灯是整车照明的重要组成,随着时代的发展,汽车前照灯的设计也越来越简单化、多样化。本文针对某车型项目阶段出现的前照灯闪烁问题,从前照灯的控制逻辑展开,分析故障产生的原因,并研究优化方案。     

ZPW-2000A轨道电路小轨电压异常判断分析

ZPW-2000A轨道电路小轨电压反映调谐区的状态。一是日常出现的波动原因较多,造成现场不容易查找;二是发生故障时,对小轨电压关注分析不够,造成查找故障走弯路。结合现场经验及案例,利用信号集中监测数据及曲线,分析小轨电压波动、异常成因。