五河口斜拉桥超长大直径工程试桩研究

为获取五河口斜拉桥超长大直径工程桩的极限承载力值，对2根直径2．5m桩长95m的工程桩，采用桩基静栽试验自平衡法单、双荷载箱技术进行试桩研究，为最终确定桥墩桩基础设计提供了直观的参考依据。该试桩方法适合特大型桥梁桩基施工场地小、试验时间短、试桩荷载大的要求，试桩经注浆补强工艺后可作工程桩应用。     

自卸式远洋散装水泥运输船特殊结构强度分析研究

以远洋散装水泥运输船为研究对象,采用三维有限元分析方法及ＤＮＶ船级社的ＳＥＳＡＭ结构计算软件,从船体结构强度、船舶振动预报和船体结构温度应力等方面对该型船结构设计的多项技术难点进行了详细的计算和评估。并且着重对大型散装水泥运输船间断内底板、中纵舱壁以及高腹板旁桁材等特殊结构的受力状态及应力分布进行分析和探讨。为自卸式散装水泥运输船的结构优化设计提供技术支撑。     

散装货船模糊综合安全性评估的实现方法

基于模糊数学的理论,将模糊多级综合评判方法运用于散装货船的综合性评估。通过综合分析与模糊化处理影响散装货船安全笥的船舶、船员及环境三方面的各种因素,建立了模糊综合安全性评估的数学库和计算机程序。     

双壳型船体结构稳态温度场和温度应力

用简化解析方法和有限元数值方法,分析了双壳型船体货舱区域在运载高温液货时的稳态温度场;根据船体结构的温度分布,用有限元法计算了其温度应力,同时与货物压力、海水静动压力、总纵弯矩等载荷作用下的结构应力做了比较。研究结果表明：在货舱结构温度场分析中用简化分析方法和有限元数值方法所得的计算结果相当一致;高温液货大幅度增加船体结构的纵向应力和横向应力,同时加剧结构不连续处的应力集中;槽型舱壁可以有效地释放     

Transient responses of a VLFS during landing and take-off of an airplane

The transient elastic deformation of a pontoon-type very large floating structure (VLFS) caused by the landing and take-off of an airplane is computed by the time-domain mode-expansion method. The memory effects in hydrodynamic forces are taken into account, and great care is paid to numerical accuracy in evaluating all the coefficients appearing in the simultaneous differential equations for the elastic motion of a VLFS. The time-histories of the imparted force and the position and velocity of an airplane during landing and take-off are modeled with data from a Boeing 747-400 jumbo jet. Simulation results are shown of 3-D structural waves on a VLFS and the associated unsteady drag force on an airplane, which is of engineering importance, particularly during take-off. The results for landing show that the airplane moves faster than the structural waves generated in the early stage, and the waves overtake the airplane as its speed decreases to zero. The results for take-off are essentially the same as those for landing, except that the structural waves develop slowly in the early stage, and no obstacle exists on the runway after the take-off of airplane. The additional drag force on an airplane due to the elastic responses of the runway considered in this work was found to be small in magnitude.     

Extensive study on the design loads used for strength assessment of tanker and bulk carrier structures

ClassNK has undertaken wide-ranging basic research covering many aspects related to the safety of ship structures, including design loads, structural analysis, strength assessment of buckling, collapse, and fatigue, and rational corrosion margins to develop new design standards which have transparency and consistency. Among the wide-ranging basic research, this article summarizes the results of extensive work on the design loads used for strength assessments of tanker and bulk carrier structures. The main aim of the research was to develop practical estimation methods of design loads with rational technical backgrounds relating to the actual loads acting on the primary structural members of tankers and bulk carriers. During this study, we proposed the following methodology. Design sea states that closely resemble the actual sea states which are considered to be the most severe for hull structures. Find practical estimation methods for the design sea states by parametric studies using the results of series calculations on representative tankers and bulk carriers. Find practical estimation methods for design regular waves which will result in the same level of stresses as those induced in irregular waves under the design sea states. We also briefly introduced some practical estimation methods for the design loads, such as ship motions, accelerations, hull-girder bending moments, and hydrodynamic pressures that are induced under design regular waves. The findings in this study have been summarized and implemented in the new design standards for tanker and bulk carrier structures.Updated from the Japanese original which won the 2003 SNAJ prize (J Soc Nav Archit Jpn 2002; 191:195–207; 2002; 191:208–220; and 2002; 192:723–733)     

让压预应力锚索在软岩隧道大变形控制中的作用机制研究

为解决高地压、高流变条件下软岩隧道围岩及支护结构大变形控制难题，通过理论和数值分析，研究让压预应力锚索在隧道大变形控制中的作用机制。研究内容包括2个方面，一是研究新型让压锚垫板在低预紧力及低围压下的力学性能，满足支护结构先柔让压的要求； 二是让压结束后，预应力锚索在高预紧力条件下改善支护结构受力性能，实现后刚强支的作用。结果表明： 1）预应力锚索通过施加预紧力，增大洞壁径向阻力，提高围岩稳定性； 2）预应力锚索在让压结束后对支护结构的主要作用是减跨，由此提高支护结构刚度和承载能力； 3）围岩、支护结构和让压预应力锚索变形协调，力学上相互耦合，构成“先柔后刚”的支护体系。     

墩台施工监理中的若干问题

针对工程的特殊性 ,管理人员在质量控制方面及相关协调工作方面进行了必要的调整和大胆尝试 ,最终促成该项目的圆满完成。     

基于相对变形的大变形隧道地应力反算

针对复杂地质条件下高地应力大变形隧道地应力复杂多变的特点，为满足该类隧道动态设计对地应力资料的要求，提出基于上台阶开挖后拱腰水平收敛与拱顶下沉的相对比值并结合开挖揭示的围岩情况，建立二维数值模型反算地应力的方法。以丽江至香格里拉铁路中义隧道为例，对该方法进行详细说明。研究表明所述方法具有无需地应力测试、计算方便的优点，施工期间可用于地应力分析、预测。中义隧道典型区段地应力反算结果表明： 1）隧道出口及2号横洞工区的地应力分布特点并不相同； 2）围岩及埋深差别不大的区段，隧道水平收敛变形出现较大差异主要是由于地应力侧压力系数不同引起的。     

有移动热源的海上大空间通风技术研究

由于有某种热源在海上大空间内移动,使得大空间通风系统也与其他一般大舱空间的通风系统不同.目前国内外对海上大空间通风系统尚无明确的规范及要求.在对大空间通风进行模型试验研究和相应的计算机模拟计算基础上,确定大空间通风系统初步方案,为大空间通风系统设计提供科学合理的试验和理论依据.