浅水波作用下护底块石对斜坡式护岸稳定性影响

在水深较小,原泥面为斜坡岩基的场区建造护岸时,应重视护底块石的设计。波浪在护底块石的上方发生破碎,卷破波对护底块体产生沿海侧方向的拖拽作用,从而导致护底块石失稳并引起护面块体的滑动。结合某护岸加固工程的方案设计和物理模型试验成果,提出在护底设计中,应结合增加护底块石质量与增大原泥面糙率两种措施制定护底块石方案;有条件时可通过增加护底长度或埋深的方式设置护底。     

关于木材运输船安全运输的几点分析

木材船海上运输具有一定的风险,一旦积载和绑扎不当或管理不妥,造成货物滚动、移位、货垛倒塌,就会引发安全事故甚至导致船舶倾覆。因此,加强木材船的安全管理,落实各项安全保障措施,是确保木材船安全运输生产的重要举措。     

基于CUDA的散货船稳性并行计算

为提高散货船配载仪中船舶稳性计算速度,通过使用CUDA(Compute Unified Device Architecture)对稳性计算过程进行并行加速.首先基于CGAL(Computational Geometry Algorithms Library)中的切片模块按肋位纵向切割船体型表面,得到每个肋位处横剖面型值数据;然后对横剖面型值数据进行等距偏移模拟板厚,得到各肋位处的外板数据;然后将外板数据发往GPU;在GPU中通过水线面和外板数据求解并行计算雅克比矩阵系数;最后将雅可比矩阵系数传回CPU,求解稳性方程组.     

钢檩条设计中的若干问题

轻型屋面钢檩条的竖向荷载、整体稳定性计算以及檩条与屋面梁、屋架的连接构造是设计的重要环节,本文结合规范和国家标准设计图的编制提出若干问题,供参考.     

薄基岩顶板隧道爆破施工围岩稳定性分析

为更有效地进行薄基岩顶板条件下隧道施工安全控制,以某高速公路隧道为工程背景,运用数值模拟的方法,分别研究不同顶板厚度下隧道爆破施工引起的围岩振速分布特征及其对围岩的损伤情况,并进行围岩稳定性分析。结果表明:1)当顶板厚度在5 m及以上时,围岩是稳定的;2)当顶板厚度为3 m时,最危险横断面上基岩顶板内开始产生严重的拉伸裂缝及一些径向裂缝,将形成超挖;3)当顶板厚度≤2 m时,径向裂缝贯穿顶板岩体,围岩稳定性较差,在掌子面后1 m内可能发生塌落、掉块等事故。     

Magneto-rheological suspensions for improving ground vehicle’s ride comfort,stability, and handling

ABSTRACT

A state-of-the-art discussion on the applications of magneto-rheological (MR) suspensions for improving ride comfort, handling, and stability in ground vehicles is discussed for both road and rail applications. A historical perspective on the discovery and engineering development of MR fluids is presented, followed by some of the common methods for modelling their non-Newtonian behaviour. The common modes of the MR fluids are discussed, along with the application of the fluid in valve mode for ground vehicles’ dampers (or shock absorbers). The applications span across nearly all road vehicles, including automobiles, trains, semi-trucks, motorcycles, and even bicycles. For each type of vehicle, the results of some of the past studies is presented briefly, with reference to the originating study. It is discussed that Past experimental and modelling studies have indicated that MR suspensions provide clear advantages for ground vehicles that far surpasses the performance of passive suspension. For rail vehicles, the primary advantage is in terms of increasing the speed at which the onset of hunting occurs, whereas for road vehicles – mainly automobiles – the performance improvements are in terms of a better balance between vehicle ride, handling, and stability. To further elaborate on this point, a single-suspension model is used to develop an index-based approach for studying the compromise that is offered by vehicle suspensions, using the H₂ optimisation approach. Evaluating three indices based on the sprung-mass acceleration, suspension rattlespace, and tyre deflection, it is clearly demonstrated that MR suspensions significantly improve road vehicle’s ride comfort, stability, and handling in comparison with passive suspensions. For rail vehicles, the simulation results indicate that using MR suspensions with an on-off switching control can increase the speed at which the on-set of hunting occurs by as much as 50% to more than 300%.     

A study on the stability of a motorcycle wheel–swingarm suspension with chain transmission

The present study describes a possible driving mechanism for a self-excited oscillation observed in motorcycle dynamics, often referred to as chatter. This phenomenon, affecting the performance of road racing motorcycles, has been simulated in straight running braking manoeuvres with multibody motorcycle models. It involves rear suspension bounce and driveline oscillation in the frequency range between 17 and 22?Hz. A simplified model of a motorcycle rear suspension with chain transmission is proposed and its stability in equilibrium configurations is studied via eigenvalue analysis. The sensitivity with respect to all its governing parameters is analysed by means of stability maps and the self-excitation mechanism is explained with the aid of energy balance analysis and phase diagrams. It is found that the key role for the instability onset is played by the gradient of the nonlinear characteristic slip function of the tyre.     

泡沫沥青冷再生基层力学性能的试验研究

对现场泡沫沥青冷再生基层的力学性能进行了研究,主要内容有根据泡沫沥青的性能指标确定了泡沫沥青的制备条件;根据国内对基层强度的要求和国外的规程,进行了无侧限抗压强度试验和间接抗拉劈裂强度试验,确定了最佳泡沫沥青用量,评价了泡沫沥青冷再生基层的力学性能。     

Simulation and analysis of vehicle stability based on ADAMS/CAR differential brake

To improve the braking safety of automobiles, the author studied the effect of differential brake on the stabilities. To analyze the mechanical characteristics of differential brake, automotive subsystem models were built by applying ADAMS/CAR, and automotive mechanics simulation model was built by setting the main subsystems such as body, engine and brake. The simulation model studied the distribution mode of three kinds of differential brake, and beeline braking stability and turning braking stability were simulated. It shows that differential brake can amend turning shortage of automobile brake and improve its braking stability, but the effect of automobile mass on its braking stability is great. So the distribution mode of braking force and the effect of mass change should be considered while differential brake is applied.     

半刚性基层沥青路面反射裂缝产生的影响因素分析

针对沥青路面反射裂缝的产生,在辽宁省不同地区选取了典型路面进行调研,通过大量的调研数据分析了沥青路面产生反射裂缝的原因,提出了抑制半刚性沥青路面产生裂缝的工程措施,对提高我省沥青路面的抗裂性能及工程的具体实施具有借鉴和指导意义。