A signal decomposition method based on repeated extraction of maximum energy component for offshore structures

Contrary to most signal decomposition methods that usually decompose an original signal into a series of components simultaneously, a novel approach based on repeated extraction of Maximum Energy Component (MEC) is proposed. The approach starts from determination of the MEC referring to the estimated Power Spectral Density (PSD) function, and then represents the MEC by employing an exponential function to fit the original signal. By defining a stopping criterion based on two adjacent estimated PSDs, each MEC can be accurately extracted with an improved performance throughout the entire signal decomposition. To verify the proposed method, a single degree-of-freedom system subject to harmonic loads has been examined. Numerical results show that the analytical response can not only be decomposed into four MECs corresponding to the excitation and the system, respectively, but also provide an accurate estimation of natural frequency and damping ratio of the system. Meanwhile, by observing results from the Ensemble Empirical Mode Decomposition (EEMD), Variational Mode Decomposition (VMD) and Prony based on state-space model (Prony-SS), an improved decomposition accuracy has been achieved from the proposed approach. Furthermore, experimental data from the Norwegian Deepwater Programme and two sets of field-test data from one fixed offshore platform and an offshore wind turbine have been used to demonstrate the correctness of the developed signal decomposition method. It is noted that divergence in results by Prony-SS can be observed when a very large model order is used, while the proposed method provides the better decomposition and reconstruction of signals.     

Integrated models of land use and transportation for the autonomous vehicle revolution

ABSTRACT

The advent of the autonomous vehicle (AV) will affect not only the transportation system, but also future patterns of land development. Integrated land use and transportation models will be critical tools in assessing the path forward with this technology. Key questions with respect to land use impacts of AVs arise from potential changes in sensitivity to travel and reduced demand for parking. It is an open question whether AVs will induce urban sprawl, or whether spatial economies of agglomeration will mitigate any reductions in travel time sensitivity. The deployment of shared fleets of AVs would likely reduce parking demand, producing yet to be explored impacts on property development within existing urban footprints. We perform a critical assessment of currently operational models and their ability to represent the adoption of AVs. We identify the representation of time in such models as a vital component requiring additional development to model this new technology. Existing model applications have focused on the discrete addition of new infrastructure or policy at a fixed point in time, whereas AV adoption will occur incrementally through time. Stated adaptation surveys are recommended as tools to quantify preferences and develop relevant model inputs. It is argued that existing models that assume comparatively static equilibrium have been convenient in the past, but are insufficient to model technology adoption. In contrast, dynamic model frameworks lack sufficient structure to maintain reasonability under large perturbations from base conditions. The ongoing advancement of computing has allowed models to move away from being mechanistic aggregate tools, towards behaviourally rich depictions of individual persons and firms. However, much work remains to move from projections of existing conditions into the future, to the evolution of the spatial economy as it evolves through time in response to new technologies and exogenous stresses. Principles from complex and evolutionary systems theory will be important in the development of models with the capacity to consider such dynamics.     

铁路牵引供电系统安全防护与优化技术方案硏究

为了提高铁路牵引供电系统安全防护等级,加强防范强电侵入的能力,减少雷击事故对铁路运输以及设备维护造成的经济损失,本文分析了牵引变电所常见的强电侵入类型及途径,针对现有问题逐一提出了优化技术方案,并阐述了研究思路及方案具体实施方法。     

福州东(樟林)车辆段工艺设计实践与创新

随着铁路建设的发展,福建省境内货车保有量大幅度增长,货车检修任务量增加迅速。樟林编组站位于福州枢纽,具备良好的扣车条件,在此新建1处货车车辆段将解决整个福建省货车的定期检修工作,而且能保障列车的运行安全,节约运输成本以及货车周转时间。福州东车辆段出入段线下穿既有温福铁路,有利于行车组织、运营安全。总图因地制宜全创新提出存车线(预检预修)与修车库贯通布置方案。充分梳理预检预修与架落车工艺,提出独立设置预检预修设施。论述抛丸除锈设备独立设置、转向架单臂悬挂检修流水线等修车库与联合车库创新设计,福州东(樟林)车辆段设计实现了创新理念和工程实际的协调统一。     

无砟轨道板精调车结构可靠性分析及优化

为提高无砟轨道板精调车结构的设计水平,考虑精调车荷载、几何尺寸和材料弹性模量等设计变量的随机性,对精调车结构进行可靠性分析、可靠性灵敏度分析和可靠性优化。首先,分析并得到精调车结构在串联失效模式下的结构功能函数;然后,运用响应面法和重要抽样方法,分析得到基于确定性优化的精调车结构的失效概率和可靠性灵敏度结果。最后,根据可靠性灵敏度分析结果,对该结构进行可靠性优化。分析精调车结构在可靠性优化前后的差异,结果表明,与确定性优化结果相比,可靠性优化使精调车结构自重增加了3.55%,但可靠度提高为0.999 999 987 7,说明设计变量的随机性对结构性能的干扰大幅减小。     

Online channel strategies under different offline channel power structures for the Belt and Road of China

ABSTRACT

This paper explores the online channel strategies adopted by Chinese manufacturers with regard to the Belt and Road. It also investigates the effect of offline channel power structures and maritime transportation costs on online channel mode selection and pricing strategies. The offline channel power structures are classified into three types, namely, Chinese manufacturer Stackelberg (MS) structure, vertical Nash (VN) structure, and foreign retailer Stackelberg (RS) structure. Furthermore, a game model is developed among the Chinese manufacturer, foreign retailer, and cross-border e-tailer to investigate the interactions among offline channel power structures, maritime transportation costs, and Chinese manufacturers’ online channel mode selection. The results show that Chinese manufacturers’ preferences for the online agency selling mode increases correspondingly with the decrease in their market position and bargaining power. Moreover, foreign retailers can obtain higher profits in the online agency selling mode under the VN structure. However, the level of profit for foreign retailers depends on the intensity of their competition with cross-border e-tailers under the MS and RS structures. Finally, consumers in countries along the Belt and Road can obtain a higher surplus in the online agency selling mode under all of the structures.     

澜沧江航道建设工程溪口滩航道整治方案

以澜沧江Ⅳ级航道建设工程溪口滩航道整治为依托，针对溪口滩整治过程中需要提升航道等级、维持航槽稳定的问题，从溪口滩水沙运动规律、历史整治情况、来水来石特征等方面分析不同溪口滩险形成原因，提出修建拦石坝、溪口导流坝以及常年维护疏浚等治理措施，以达到提升航道尺度并维持航道稳定的目的。结果表明，在山区河流溪口滩航道整治过程中采用拦、导、疏等工程措施，能够解决溪口滩险碍航成滩的难题，可为类似工程提供参考。     

微机控制的船用发电机继电保护实验装置

由于微机控制的继电保护与常规保护比较起来有许多优点,因此微机控制的船用发电机继电保护实验装置有其取代原有实验装置的必要性。本文就微机控制的船用发电机继电保护实验装置的硬件结构、软件算法和软件抗干扰技术进行了探讨。     

半约束模型试验--一种验证随浪和斜浪中波浪力计算的手段

本文采用半约束模型试验技术，对一条高速船在规则波中随浪和斜浪工况进行了流体动力系列试验，以探讨航运的安全性，验证作用于船体上波浪力的估算方法。对每次试验，以波动方程的形式采用数值估算方法确定环绕船模的波浪运动的时间历程。并用同样的方法从测量数据中提取垂荡和纵摇与模型测量运动，一阶波导纵荡、横荡作用力和首摇力矩。因此合理比较理论计算的波浪力与力矩的时间历程成为可能。这表明SSPA海事动力学的研究所(MDL)模型试验设施可以提供高质量的测量，与所述计算方法结合起来可用来验证理论计算和建立半经验方法。     

减振降噪技术的应用设计

本文针对某型号测量船主要噪声振动源采取相应技术措施进行减振降噪综合治理研究，其中主机采用低频大载荷隔振器的单层隔振、辅机采用浮筏隔振装置、机座采用局部阻尼处理等措施。由于该船采用了先进的浮筏技术及其他隔振措施，在提高船上测量系统读取数值精度的同时，大大改善了船上水声设备测绘工作环境和船员的生活环境，提高了该船的设备使用寿命和船员体力极限。本船自噪声在低航速时已淹没在海洋背景噪声之中。特别是该船减振降噪装置在系统的声学匹配设计方面取得了进展，经实船验证，效果良好，证明该设计方法可行，对减振降噪技术在各型舰船上的工程应用开发研究有一定借鉴作用。