基于生长曲线函数的货车运营环节碳达峰研究

货车是我国大气环境污染的重要来源之一，也是影响我国碳达峰总体目标实现的重要因 素。本文从货车运营环节入手，在运用生长曲线函数对货车保有量进行预测的基础上，对不同类 型货车的保有量和单车碳排放变化进行研究，并从货车节能技术发展、新能源货车推广和应用进 程两方面入手，分3种情景对货车运营环节中产生的碳排放总量趋势进行预判，推演货车运营环 节的碳达峰时间。研究结果表明，只有同时加快货车节能技术发展以及新能源货车推广和应用 进程，货车运营环节中产生的碳排放总量规模才能得到有效抑制并逐渐减少。若到 2030 年货 车单车燃料消耗水平较 2019 年降低 20%以上，新能源货车在货车整体保有量中的占比达到 20%，到 2060 年货车单车燃料消耗水平较 2019 年降低 50%，新能源货车占比达到 50%，则货车 运营环节碳达峰时间将缩短至2030年左右实现，2030年后货车运营环节产生的碳排放总量规 模将逐渐减少。     

A comparative life-cycle energy and emissions analysis for intercity passenger transportation in the U.S. by aviation,intercity bus,and automobile

Intercity passenger trips constitute a significant source of energy consumption, greenhouse gas emissions, and criteria pollutant emissions. The most commonly used city-to-city modes in the United States include aircraft, intercity bus, and automobile. This study applies state-of-the-practice models to assess life-cycle fuel consumption and pollutant emissions for intercity trips via aircraft, intercity bus, and automobile. The analyses compare the fuel and emissions impacts of different travel mode scenarios for intercity trips ranging from 200 to 1600 km. Because these modes operate differently with respect to engine technology, fuel type, and vehicle capacity, the modeling techniques and modeling boundaries vary significantly across modes. For aviation systems, much of the energy and emissions are associated with auxiliary equipment activities, infrastructure power supply, and terminal activities, in addition to the vehicle operations between origin/destination. Furthermore, one should not ignore the embodied energy and initial emissions from the manufacturing of the vehicles, and the construction of airports, bus stations, highways and parking lots. Passenger loading factors and travel distances also significantly influence fuel and emissions results on a per-traveler basis. The results show intercity bus is generally the most fuel-efficient mode and produced the lowest per-passenger-trip emissions for the entire range of trip distances examined. Aviation is not a fuel-efficient mode for short trips (<500 km), primarily due to the large energy impacts associated with takeoff and landing, and to some extent from the emissions of ground support equipment associated with any trip distance. However, aviation is more energy efficient and produces less emissions per-passenger-trip than low-occupancy automobiles for trip distances longer than 700–800 km. This study will help inform policy makers and transportation system operators about how differently each intercity system perform across all activities, and provides a basis for future policies designed to encourage mode shifts by range of service. The estimation procedures used in this study can serve as a reference for future analyses of transportation scenarios.     

Layout optimization of an inertial energy harvester for miniature underwater mooring platforms

Comprehensive analyses of the layout influence on power performance of a low-frequency miniature horizontal-pendulum-type inertial energy harvester for underwater mooring platforms are presented in this article. The mathematical models are obtained utilizing the Newton-Euler method. The power performance is evaluated by simulations over different parameters, such as damping, excitation frequency, and layout position. Simulation results indicate that the harvester can extract energy from low-frequency excitations over the range of 0.1 Hz–0.4 Hz, and maximum output power can reach to 0.7 W under excitation frequency f = 0.4 Hz. Different layout positions influence the energy harvesting performance of the harvester dramatically. Changing the layout position to positive value can enhance and broaden the power performance. The amplitude responses with different layout positions do not show resonant characteristics, even near the natural frequency of the harvester, due to large amplitude vibrations and strong nonlinear characteristic. As excitation frequency f = 0.4 Hz, there is a zero output power point appears at layout position d = −1.3 m. Moreover, the harnessed power has a quadratic relationship with the layout position value.     

一种新的碰撞耗散能快速估算方法及其在船—平台碰撞事故中的应用研究

海洋平台在作业过程中存在遭受船舶碰撞的潜在危险,一旦事故发生将可能导致结构严重损伤从而影响平台的作业安全,因此在平台结构设计阶段需要考虑其抗撞性能.文章以海洋供应船撞击半潜式钻井平台为研究对象,基于碰撞外部动力学理论和DNV规范计算方法,计及平台艏摇运动响应的影响,提出了一种新的耗散能估算方法-DNV`R解析法.以非线性有限元船-平台碰撞数值仿真结果为参考,将该解析法与规范法、Zhang解析法及Liu解析法计算结果进行对比,研究得出:文中所提出的DNV`R解析法弥补了规范法较为保守且仅适用于对心碰撞场景的不足,计算过程简单、便捷,且计算精度与Zhang解析法和Liu解析法基本接近,能够满足船-平台碰撞耗散能快速估算的精度要求.     

台风"莎莉嘉"过境期间某泻湖内波浪特征分析

通过在某岛礁泻湖内布置ADCP波流测量仪器,采集到2016年21号台风"莎莉嘉"期间的波浪数据.结合布置在泻湖口处风速仪的风实测数据,本文对该时间段内的波浪特征进行分析.由波浪统计数据分析发现有义波高随时间的变化趋势与风速的变化趋势高度重合;谱峰周期的变化则要晚于风速的变化;谱峰方向在台风起主导作用期间与风向高度一致.通过分析多个无因次参数以及对风浪和涌浪进行分离发现测点与台风中心距离开始变大的这个时间点有着重要的意义.在该时间点,波长开始变长,波浪由无限水深波浪转变为有限水深波浪.一些波浪特征值,比如谱峰周期、a/L,也发生比较大的变化.此后在七级风半径不再覆盖测点时,该处波浪由风浪转变为涌浪.对波浪谱进行分析发现,在台风主导期间,其谱为单峰谱,其余时间则为双峰谱.     

基于云平台的城市轨道交通能源管理系统

阐述了基于云平台的城市轨道交通能源管理系统架构和建设方式。该系统利用云计算的高效和弹性来部署建设,采用线网-车站二层管理模式,降低了线网和线路服务器等的硬件部署成本和维护成本。通过将能源管理系统内部使用的业务应用转换为基于云平台的能源管理应用软件,能源管理系统可获取云平台提供的共享数据,并将经过业务处理后的数据存储到云平台中,以服务于云平台上其他业务,实现了数据资源的逻辑统一和高效利用。     

基于FLAC软件模拟强夯加固吹填砂地基

基于港区陆域吹填项目,采用FLAC软件建立三维模型,模拟了不同夯能、夯击次数对强夯效果的影响,对强夯前后杨氏模量的变化进行了分析研究。结果表明,表层吹填砂厚度和下卧软土层分布对夯能的大小起着决定作用。对于下卧松散砂层,可适当加大夯击能量和夯击次数(7~8击),增加其处理深度和效果;而对于下卧软黏土层,可以适当减小夯击能量并增加夯击次数,以提高加固效果。夯击之后,表层吹填砂的杨氏模量有较大的提高,从原来的10 MPa提高到20~40 MPa。     

里海远洋渔船无人机舱系统研究

针对我国远洋渔船装备落后、操纵性差、机舱环境恶劣、电站管理水平低、劳动强度大以及渔船机舱自动化水平低等问题,介绍里海远洋渔船无人机舱系统的设计与组成。通过采用主机遥控系统、电站功率管理系统、机舱监测报警系统以及网络通信等技术,将自动化、电气化、信息化和智能化控制技术等船舶前沿科技应用于实船,构建一个满足法国船级社(BV)机舱自动化最高等级AUT-UMS要求的无人机舱系统,以提高远洋渔船的操控性、安全性和可靠性,提升供电系统自动化管理水平,改善作业人员工作环境。对该自动化系统的效果和特点进行分析,结果可为我国远洋渔船自动化系统的研究提供策略和思路。     

西部原油管道输量与能耗分析

为降低西部原油管道管输能耗,通过计算管道在不同季节、不同流量下的摩阻损耗,结合管道参数和输油泵特性曲线,分析得出影响输油生产单位能耗的因素包括管输流量和输油温度。进一步计算得出了不同流量和不同季节对应的输油生产单耗。结果表明,流量对输油生产单耗影响较大,西部原油管道管输流量在1 000~1 400 m~3/h区间时生产单耗相对较低;流量大于1 600 m3/h时,生产单耗随流量上升接近线性增长。而输油温度对生产单耗的影响较小,同一流量下冬季生产单耗略高于夏季生产单耗。     

The impact of land-use mix on residents' travel energy consumption: New evidence from Beijing

Policies that encourage mixed land use are widely believed to make transport more energy efficient. However, few studies have directly examined the impacts of land-use heterogeneity on travel energy consumption at the individual level. Moreover, the definition and measures of land-use heterogeneity are debated. This paper aims to fill these gaps using the large city of Beijing, China, as a case study. Three types of land use are examined in terms of their effects on individual residents’ travel energy consumption. The results suggest that high land-use diversity and a good jobs-housing balance significantly reduces commuting travel. Interestingly, highly heterogeneous retail and housing areas may have high travel energy use, as residents are more likely to go shopping. There are obvious spatial variations in these effects. Residents of suburban ‘newtowns’, where the jobs-housing balance is particularly good, consume less travel energy. The results suggest that decreased use of conventional planning patterns, such as the socialist danwei system, and increasing urban sprawl, bring new challenges to achieving transport efficiency. Mixed land-use policies can be an effective solution to these challenges.